Numerical Simulation of Zr-based Bulk Metallic Glass During Continuous Casting Solidification Process
Source abstract
Abstract
A numerical simulation method was used to analyze the solidification process of Zr-based bulk metallic glass (BMG) during the horizontal continuous casting (HCC) process. The large-scale general-purpose finite element analysis software ANSYS was adopted to develop a temperature field model. The variation of temperature field in the specific area at different time was studied. Its accuracy was verified by the experimental results of Zr48Cu36Ag8Al8 bulk metallic glass continuous casting solidification process. The effects of casting parameters include intermittent casting procedure (drawing and stopping), casting speed, pouring temperature and cooling rate. The results show that the optimum casting speed range is 1-2 mm/s, pouring temperature is 1223 K and cooling rate of 10 mm rod casting is 5 L/min respectively. A fully Zr-based bulk metallic glass whose diameter is 10 mm and length has no limitation has been successfully fabricated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural and Historical Studies · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dalian University of Technology, China
References (22)
Show source-provided references
1. Numerical analysis of fluid flow and heat transfer in the parallel type mold of a thin slab caster10.2355/isijinternational.41.974 ↗
2. Existence result of an effective stress for an isotropic visco-plastic composite10.1016/j.commatsci.2012.03.058 ↗
3. Antiplane interface crack in a pre-stressed fiber-reinforced elastic composite10.1016/j.commatsci.2007.07.028 ↗
4. Ionescu A · 2011 · 307
5. Numerical study on the prediction of microstructure parameters by multi-scale modeling of directional solidification of binary aluminum–silicon alloys10.1016/j.commatsci.2008.02.002 ↗
6. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
7. Advanced high-strength and ductile Fe-Cr-Mo-Ga-Si alloys
8. Nanomoulding with amorphous metals10.1038/nature07718 ↗
9. Superplastic nanoforging of Pt-based metallic glass with dies of Zr-BMG and glassy carbon fabricated by focused ion beam10.4028/www.scientific.net/MSF.539-543.2088 ↗
10. Novel applications of bulk metallic glass for industrial products10.1016/j.jnoncrysol.2007.05.170 ↗
11. Fabrication of bulk glassy Zr55Al10Ni5Cu30 alloy of 30 mm in diameter by a suction casting method10.2320/matertrans1989.37.185 ↗
12. Production of Zr55Cu30Ni5Al10 glassy alloy rod of 30 mm in diameter by a cap-cast technique10.2320/matertrans.MRP2007164 ↗
13. Synthesis and properties of Cu-Zr-Ag-Al glassy alloys with high glass-forming ability10.1016/j.mseb.2007.09.064 ↗
14. Fundamental aspects of bulk metallic glass formation in multicomponent alloys10.4028/www.scientific.net/MSF.225-227.35 ↗
15. Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter10.2320/matertrans1989.38.179 ↗
16. Ni-rich bulk metallic glasses with high glass-forming ability and good metallic properties10.2320/matertrans.MRA2008453 ↗
17. High glass-forming ability correlated with fragility of Mg–Cu(Ag)–Gd alloys10.1063/1.2821755 ↗
18. Influence of similar atom substitution on glass formation in (La–Ce)–Al–Co bulk metallic glasses10.1016/j.actamat.2007.02.026 ↗
19. Glass formability, thermal stability and mechanical properties of La-based bulk metallic glasses10.1016/j.jallcom.2006.07.109 ↗
20. Preparation of Cu36Zr48Ag8Al8 bulk metallic glass with a diameter of 25 mm by copper mold casting10.2320/matertrans.48.629 ↗
21. Study on continuous casting of bulk metallic glass10.1016/j.matlet.2011.04.033 ↗
22. Mills AF · 1999