journal article·2020Open access

Plasma Nitriding of ISO 5832-1 Stainless Steel with Intermittent Nitrogen Flow at 450°C

Ricardo Fernando dos Reis, Paulo Gabriel Heity Mori da Silva, Rodrigo Lupinacci Villanova, Andrey Matheus Vianna, Euclides Alexandre Bernardelli

Materials Research· Volume 23· Issue 1

Abstract

ISO 5832-1 stainless steel specimens were plasma nitrided at different nitrogen potentials. The main goal was to obtain the S-phase with different nitrogen concentrations and free of chromium-based precipitates. The control of nitrogen potential was made by pulsing the gas at predetermined times: 10/10, 05/15, 02/18, and 01/19, where the numbers represent the time in minutes that the nitrogen flow was kept on/off, respectively. For all pulsing conditions, the nitriding was carried out at 450 °C for 2 hours. After nitriding, specimens were characterized by means of optical (OM) and electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and microhardness. Results show that the nitrided layer thickness decreases with decreasing times of nitrogen pulse, and that lower times of nitrogen flow lead to lower precipitation of chromium nitrides. It can be thus concluded that the use of intermittent nitrogen flow is an alternative to control the nitrided layer in terms of thickness, hardness, and the amount of nitrogen present in phase ɣN (S-phase).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Tecnológica Federal do Paraná, Brasil

References (31)

Show source-provided references
1. Plasma nitriding of stainless steels at low temperatures10.1016/S0257-8972(99)00084-5 ↗
2. Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding10.1016/S0257-8972(00)00930-0 ↗
3. Investigating the correlation between some of the properties of plasma nitrided AISI 316L stainless steel10.1590/S1516-14392013005000081 ↗
4. Low-temperature plasma nitriding of sintered PIM 316L austenitic stainless steel10.1590/S1516-14392014005000064 ↗
5. Electrochemical behaviour of an AISI 304L stainless steel implanted with nitrogen10.1016/j.electacta.2008.03.064 ↗
6. Nitretação em alta temperatura de aços inoxidáveis
7. Nitrogen surface enrichment of austenitic stainless steel ISO 5832-110.1007/s10853-010-4827-3 ↗
8. Solution heat treatment of plasma nitrided 15-5PH stainless steel - Part I: improvement of the corrosion resistance
9. Nitrogen surface enrichment of austenitic stainless steel ISO 5832-1: SHTPN vs Low-temperature plasma nitriding10.1590/1516-1439.352014 ↗
10. Low pressure plasma arc source ion nitriding compared with glow-discharge plasma nitriding of stainless steel10.1016/S0257-8972(01)01283-X ↗
11. Surface modification of AISI 304 austenitic stainless steel by plasma nitriding10.1016/S0169-4332(03)00260-5 ↗
12. Gavriljuk V · 1999
13. Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel10.1016/S0921-5093(00)01841-4 ↗
14. Improvement of mechanical properties of martensitic stainless steel by plasma nitriding at low temperature
15. Role of plasma nitriding temperature and time in the corrosion behaviour and microstructure evolution of 15-5 PH stainless steel
16. Plasma nitriding of 316L austenitic stainless steel: experimental investigation of fatigue life and surface evolution10.1016/j.surfcoat.2009.09.052 ↗
17. Corrosion resistance of nitrided layers on austenitic steel10.1016/j.surfcoat.2005.11.099 ↗
18. Sphair AC · 2017
19. The effect of plasma nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316L stainless steel implant material in SBF solution10.1016/j.surfcoat.2014.11.037 ↗
20. On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel10.1016/j.surfcoat.2006.08.060 ↗
21. 2016
22. Study of expanded austenite formed in plasma nitride AISI 316L samples, using synchrotron radiation diffraction10.1590/1516-1439.285914 ↗
23. 2012
24. Study of the S phase formed on plasma-nitrided AISI 316L stainless steel10.1016/j.msea.2006.06.023 ↗
25. Estrutura e propriedades do aço inoxidável austenítico AISI 316L grau ASTM F138 nitretado sob plasma à baixa temperatura
26. On the occurrence of dual diffusion layer during plasma-assisted nitriding of austenitic stainless steel10.1016/j.surfcoat.2005.06.014 ↗
27. Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding10.1016/S0257-8972(99)00085-7 ↗
28. 2011
29. Comparação entre os comportamentos dos aços inoxidáveis AISI 304L e AISI 316L nitretados a plasma
30. On the crystallography structure of S-phase10.1016/j.scriptamat.2003.09.042 ↗
31. Delayed cracking in plasma nitriding of AISI 420 stainless steel10.1016/j.surfcoat.2007.04.107 ↗