Physical and Mechanical Behavior of NiTi Composite Fabricated by Newly Developed Uni-Axial Compaction Die
Source abstract
Abstract
Owing to better mechanical properties and shape memory effect, the NiTi composites fabricated by powder metallurgy are suitable for biomedical implants. However, the excessive porosity and formation of micro-cracks are the major issues related to the NiTi composite. This work focused on developing crack-free dense NiTi composites by newly developed uni-axial compaction die. The work includes the design and manufacturing of uni-axial compaction die. The die was tested by SOLIDWORKS software in a simulated environment. Further, composite samples were successfully fabricated without circumferential micro-cracks at 1910.82 MPa compaction pressure. The effects of compaction pressure on microstructural, densification, and mechanical behavior of NiTi composites were also analyzed. Microstructural characterization shows that the Ni-rich phase increased and the Ti-rich phase decreased with the increase of compaction pressure. The porosity reduces from 17.04 to 8.75% by increasing the compaction pressure from 1273.88 to 1910.82 MPa, and a maximum density of 5.50 g.cm–3 was obtained. The NiTi150 composite has similar Young’s modulus, and compressive strength (6.93 GPa and 94.36 MPa) compared to cortical and cancellous bone. The high compaction pressure also increases the micro-hardness of NiTi composite up to 453.8 HV0.5.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Rajkiya Engineering College, India; Dr. A P J Abdul Kalam Technical University, India
Rajkiya Engineering College, India
Institute of Engineering and Technology, India
References (47)
Show source-provided references
1. Fabrication of NiTi through additive manufacturing: a review10.1016/j.pmatsci.2016.08.001 ↗
2. Fatigue behavior and cyclic deformation of additive manufactured NiTi10.1016/j.jmatprotec.2017.10.006 ↗
3. Intraosseous metal implants in orthopedics: a review10.1016/j.morpho.2018.09.003 ↗
4. The influence of Ni powder size, compact composition and sintering profile on the shape memory transformation and tensile behaviour of NiTi10.1016/j.intermet.2010.03.043 ↗
5. A review on additive manufacturing of shape-memory materials for biomedical applications10.1007/s11837-020-04013-x ↗
6. Shape memory response of porous NiTi shape memory alloys fabricated by selective laser melting10.1007/s10856-018-6044-6 ↗
7. Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity10.1016/j.intermet.2016.12.025 ↗
8. Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering10.1016/j.msec.2014.10.053 ↗
9. A study on microstructure and porosity of NiTi alloy implants produced by SHS10.1016/j.jallcom.2009.08.023 ↗
10. Thermomechanical cyclic stability of porous NiTi shape memory alloy10.1016/j.materresbull.2017.07.016 ↗
11. Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: comparison of hot isostatic pressing and spark plasma sintering techniques10.1016/j.ceramint.2018.06.025 ↗
12. Review of densification of titanium based powder systems in press and sinter processing10.1179/174329009X434293 ↗
13. Cold compaction study of Armstrong Process® Ti–6Al–4V powders10.1016/j.powtec.2011.08.007 ↗
14. Development of Cu-bearing powder metallurgy Ti alloys for biomedical applications10.1016/j.jmbbm.2019.05.014 ↗
15. Deformation of powder metallurgy materials in cold and hot forming10.1016/j.jmatprotec.2007.08.017 ↗
16. Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy10.1016/j.jallcom.2018.10.230 ↗
17. High oxygen-content titanium and titanium alloys made from powder
18. Green machining of powder-metallurgy-steels (PMS): an overview10.1016/j.jmapro.2019.05.009 ↗
19. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
20. Design of low cost high performance powder metallurgy titanium alloys: some basic considerations10.4028/www.scientific.net/KEM.520.24 ↗
21. Derivation, testing and application of a practical compaction equation for cold die-compacted metal powders10.1016/j.powtec.2017.09.027 ↗
22. Characterization of Ni–Ti shape memory alloys prepared by powder metallurgy10.1016/j.jallcom.2013.05.029 ↗
23. Microstructure and mechanical properties of powder metallurgy high temperature titanium alloy with high Si content
24. Porous NiTi fabricated by self-propagating high-temperature synthesis of elemental powders10.1016/j.jmatprotec.2007.09.037 ↗
25. Effect of compacting pressure on microstructure, physical and mechanical properties of NiTi SMA
26. Cold compaction of metal–ceramic powders in the preparation of copper base hybrid materials10.1016/j.msea.2009.07.002 ↗
27. Experimental and 3D MPFEM simulation study on the green density of Ti–6Al–4V powder compact during uniaxial high velocity compaction10.1016/j.jallcom.2019.153226 ↗
28. Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: a review10.1016/j.matdes.2013.09.045 ↗
29. Analyses of the fundamental parameters of cold die compaction of powder metallurgy10.1016/j.jmatprotec.2007.08.030 ↗
30. Lode dependency in the cold die powder compaction process10.1016/j.powtec.2011.12.044 ↗
31. Heat treatment of tool steel D3 and effects on mechanical properties
32. Influence of heat treatment on resistance of wear and mechanical properties of die steel kind D3
33. Density-pressure relationships in powder compaction
34. Synthesis of NiTiIntermetallics by self-propagating combustion10.1016/j.jallcom.2003.12.016 ↗
35. Fabrication of NiTi shape memory alloys with graded porosity to imitate human long-bone structure10.1016/S1672-6529(14)60147-5 ↗
36. Superelastic behaviors of biomedical porous NiTi alloy with high porosity and large pore size prepared by spark plasma sintering10.1016/j.jallcom.2015.05.063 ↗
37. Phase transformation of NiTi alloys during vacuum sintering10.1088/1757-899X/204/1/012023 ↗
38. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
39. Preparation of nitinol by non-conventional powder metallurgy techniques10.1179/1743284715Y.0000000041 ↗
40. Compaction simulation of crystalline nano-powders under cold compaction process with molecular dynamics analysis10.1016/j.powtec.2020.06.069 ↗
41. Study of the uniaxial cold compaction of AISI 316L stainless steel powders through single action tests10.1016/j.powtec.2016.03.045 ↗
42. Analysis of compressibility behavior and development of a plastic yield model for uniaxial die compaction of sponge titanium powder10.1016/j.jmatprotec.2016.12.004 ↗
43. Fabrication of porous NiTi alloy via powder metallurgy and its mechanical characterization by shear punch method10.3103/S1067821212020113 ↗
44. Tailoring the pore morphology of porous nitinol with suitable mechanical properties for biomedical applications10.1016/j.matlet.2015.04.057 ↗
45. Ti based biomaterials, the ultimate choice for orthopedic implants-A review10.1016/j.pmatsci.2008.06.004 ↗
46. Microstructural and mechanical properties of porous 60NiTi prepared by conventional press-and-sinter method10.1051/matecconf/201710901002 ↗
47. Effect of nano-hydroxyapatite reinforcement in mechanically alloyed NiTi composites for biomedical implant10.1016/j.msec.2016.05.092 ↗