journal article·2023Open access

Titanium Oxynitriding by Plasma-Assisted Thermochemical Treatments Using a Competitive Atmosphere of H2-N2-O2

J. O. Vitoriano, R. S. Pessoa, A. A. Mendes Filho, J. Amorim Filho, C. Alves-Junior

Materials Research· Volume 26· Issue suppl 1

Abstract

The incorporation of oxygen and/or nitrogen into the titanium lattice has garnered significant attention due to the broad spectrum of intermediate properties that can be achieved between TiN and TiO2. This article delves into the investigation of surface modification of titanium through plasma-assisted thermochemical treatments employing H2-N2-O2 mixtures. The flow rate of the reducing gas (H2) remained constant at 24 sccm, while the flow rates of N2 and O2 were adjusted to yield a total flow rate of 60 sccm. Analysis using GIXRD, Raman spectroscopy, and XPS demonstrated that TiN exhibits stability exclusively in an oxygen-free atmosphere, while TiO2, in contrast, necessitates an oxygen flux equal to or exceeding 18 sccm for stability. Furthermore, it was found that the presence of nitrogen in the plasma atmosphere resulted in a greater expansion of the α-titanium lattice, although the solubility of interstitials decreased. These findings highlight the potential for a controlled approach to producing solid solutions or titanium oxynitrides.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio Grande do Norte, Brasil

Instituto Tecnológico de Aeronáutica, Brasil

Universidade Federal do ABC, Brasil

Universidade Federal do Rio Grande do Norte, Brasil; Instituto Tecnológico de Aeronáutica, Brasil

References (54)

Show source-provided references
1. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
2. Engineering the surface/interface structures of titanium dioxide micro and nano architectures towards environmental and electrochemical applications10.3390/nano7110382 ↗
3. β-Ti-based alloys for medical applications10.3103/S1067821221010156 ↗
4. Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods10.1016/j.surfcoat.2004.07.115 ↗
5. Electrical and optical properties of titanium oxynitride thin films10.1007/s10853-019-04278-x ↗
6. Changing the physical and chemical properties of titanium oxynitrides TiN1-x Ox by changing the composition10.1103/PhysRevB.80.184112 ↗
7. Microstructure and magnetic properties of oxidized titanium nitride thin films in situ grown by pulsed laser deposition
8. Surface phase diagrams of titanium in Oxygen, Nitrogen and Hydrogen environments: a first principles analysis10.1016/j.susc.2018.05.007 ↗
9. Low-temperature synthesis of titanium oxynitride nanoparticles10.3390/nano11040847 ↗
10. Room temperature sputtered titanium oxynitride thin films: the influence of oxygen addition10.1016/j.tsf.2020.138269 ↗
11. Thermodynamic description of the Ti–C–N–O system
12. Formation of oxynitrides on titanium alloys by gas diffusion treatment10.1016/j.tsf.2011.04.219 ↗
13. Effect of preliminary erosive cutting on the thermochemical treatment of a vt6 alloy and the structure of diffusion layers10.1134/S0036029520090165 ↗
14. Extreme hardening of titanium with colossal interstitial contents of nitrogen and oxygen10.1016/j.msea.2021.141033 ↗
15. Titanium nitride oxidation chemistry: an x-ray photoelectron spectroscopy study10.1063/1.351465 ↗
16. Yang L · 2018
17. XPS study of the nitrides, oxides and oxynitrides of titanium10.1016/0368-2048(92)80001-O ↗
18. Effect of the nitrogen-oxygen ratio on the position of N atoms in the TiO2 lattice of N-doped TiO2 thin films prepared by DC magnetron sputtering10.1039/C8CE00773J ↗
19. A review of metal oxynitrides for photocatalysis10.1039/C5QI00202H ↗
20. Plasma-assisted nitrogen fixation in nanomaterials: Fabrication, characterization, and application
21. Temperature and substrate influence on the structure of TiNxOy thin films grown by low pressure metal organic chemical vapour deposition10.1016/S0257-8972(99)00588-5 ↗
22. Influence of plasma species on the surface properties modification of titanium treated with a N2-Ar-O2 plasma
23. Surface modification of titanium by plasma nitriding10.1590/S1516-14392003000200023 ↗
24. Industrial application of AISI 4340 steels treated in cathodic cage plasma nitriding technique10.1016/j.msea.2007.06.033 ↗
25. Physical and metallurgical aspects of ionnitriding
26. Ion nitriding of steels10.1116/1.569579 ↗
27. Plasma nitriding with nitrogen, hydrogen, and argon gas mixtures: structure and composition of coatings on titanium10.1179/sur.1992.8.3.206 ↗
28. Oxygen, hydrogen, and deuterium effects on plasma nitriding of metal alloys10.1016/j.scriptamat.2005.12.013 ↗
29. Plasma nitriding of titanium alloys
30. D.c. diode ion nitriding behavior of titanium and Ti-6Al-4V10.1016/S0040-6090(97)00075-8 ↗
31. Effect of OH species in the oxynitride titanium formation during plasma-assisted thermochemical treatment
32. Influence of substrate bias on the structure and properties of TiCN films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2016.08.047 ↗
33. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
34. Understanding TiO2 photocatalysis: mechanisms and materials10.1021/cr5001892 ↗
35. Effects during plasma nitriding of shaped materials of different sizes10.1016/S0257-8972(02)00887-3 ↗
36. Optical properties of laser induced oxynitride films on titanium10.1016/j.apsusc.2014.01.047 ↗
37. Effect of temperature on gas oxynitriding of Ti-6Al-4V alloy10.1016/j.surfcoat.2019.01.015 ↗
38. Influence of nitrogen interstitials in α-titanium and nitrogen vacancies in δ-titanium nitride on lattice parameters and bulk modulus - computational study10.1016/j.commatsci.2022.111509 ↗
39. Influence of interstitial oxygen on the lattice parameters of solution-treated and aged Ti-8.6 wt% Al alloys10.1557/PROC-166-261 ↗
40. Extreme hardening of titanium with colossal interstitial contents of nitrogen and oxygen10.1016/j.msea.2021.141033 ↗
41. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗
42. Interstitial diffusion of O, N, and C in α-Ti from first-principles: analytical model and kinetic Monte Carlo simulations10.1063/1.4942030 ↗
43. Study of the deposition of Ti/TiN multilayers by magnetron sputtering10.1002/sia.3299 ↗
44. Substrate bias dependence of Raman spectra for TiN films deposited by filtered cathodic vacuum arc10.1063/1.1491588 ↗
45. Raman scattering from TiNx (0.67 ≤ x ≤ 1.00) single crystals grown on MgO(001)10.1063/1.3651381 ↗
46. Micro-Raman characterization of plasma nitrided Ti6Al4V-ELI10.1016/j.surfcoat.2007.05.038 ↗
47. Structural and tribo-mechanical characterization of nitrogen plasma treated titanium for bone implants10.1016/j.surfcoat.2013.12.009 ↗
48. Raman microscopic studies of PVD hard coatings10.1016/S0257-8972(99)00072-9 ↗
49. Structure sensitive photocatalytic reduction of nitroarenes over TiO210.1038/s41598-017-08599-2 ↗
50. XPS and RBS investigation of TiN xO y films prepared by vacuum arc discharge10.1016/j.nimb.2011.11.010 ↗
51. XPS analysis of adsorption of oxygen molecules on the surface of Ti and TiNx films in vacuum10.1016/0368-2048(92)80016-2 ↗
52. Mechanical and optical properties of composite TiOxNy films prepared by pulsed bias arc ion plating10.1016/j.cap.2009.01.034 ↗
53. Titanium nitride oxidation chemistry: an x-ray photoelectron spectroscopy study10.1063/1.351465 ↗
54. Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN10.1016/j.apsusc.2006.10.047 ↗