journal article·2023Open access

Rheological Behavior of Alumina Suspensions for Additive Manufacturing Using Digital Light Processing

P.L.A Alves, J.R. Verza, A.P. Luz

Materials Research· Volume 26

Abstract

Additive manufacturing using vat photopolymerization has gained attention for creating intricate ceramic parts. Digital light processing (DLP) is known for its high resolution and speed, but achieving stable ceramic suspensions with high solids concentration and low viscosity is challenging. This study investigated the impact of different dispersants on the rheology and stability of photopolymerizable suspensions. A commercially available water-washable resin, along with three dispersants (Castament FS 10, Triton-X, and DISPERBYK-111), and reactive alumina powder were used to formulate various ceramic suspensions. Viscosity and stability measurements determined the most efficient dispersant and concentration for DLP ceramic part production. Results showed that suspensions with DISPERBYK-111 had optimal viscosity and stability. However, the commercial resin presented higher viscosity, limiting solid loading to 40 vol.% alumina. Successful printing trials were conducted using a commercial printer. The alumina parts were thermally treated at 1550ºC, resulting in ceramics with a good surface finish, well-defined and adhered printed layers, 53.3% relative density, 19.65% XY shrinkage, and 13.69% Z-axis shrinkage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de São Carlos, Brasil

Universidade Federal de São Carlos, Brasil; Universidade Federal de São Carlos, Brasil

References (25)

Show source-provided references
1. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing10.1016/j.ceramint.2018.09.152 ↗
2. A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
3. Effect of polystyrene addition on properties of porous Si3N4 ceramics fabricated by digital light processing10.1016/j.ceramint.2023.05.246 ↗
4. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography: optimization of the drying and debinding processes10.1016/j.ceramint.2016.04.050 ↗
5. Ceramic 3D printing: comparison of SLA and DLP technologies10.17973/MMSJ.2020_06_2020006 ↗
6. Optimization of UV-curable alumina suspension for digital light processing of ceramic membranes10.1016/j.memsci.2021.120066 ↗
7. Additive manufacturing: challenges, trends, and applications10.1177/1687814018822880 ↗
8. Effects of ZrSiO4 content on properties of SiO2-based ceramics prepared by digital light processing10.1016/j.ceramint.2022.11.128 ↗
9. 3Y-TZP DLP additive manufacturing: solvent-free slurry development and characterization10.1590/1980-5373-mr-2020-0457 ↗
10. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization10.1016/j.ceramint.2021.01.031 ↗
11. Defect control in digital light processing of high-solid-loading ceramic core10.1016/j.ceramint.2022.06.141 ↗
12. Rheology of UV curable colloidal silica dispersions for rapid prototyping applications10.1016/j.jeurceramsoc.2011.05.004 ↗
13. Effect of surfactant on dispersion of alumina in photopolymerizable monomers and their UV curing behavior for microstereolithography10.1016/j.ceramint.2014.12.066 ↗
14. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography10.1016/j.jeurceramsoc.2018.10.024 ↗
15. Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions10.1016/j.jeurceramsoc.2016.12.013 ↗
16. Monitoring of polyethylene glycoldiacrylate-based hydrogel formation by real time NMR spectroscopy
17. Konsistenzmessungen von gummibenzollosungen
18. Efficient cleaning of ceramic green bodies with complex architectures fabricated by stereolithography-based additive manufacturing via high viscoelastic paste
19. Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method10.1016/j.matchemphys.2017.12.021 ↗
20. Rheological properties of PZT suspensions for stereolithography10.1016/S0955-2219(02)00036-5 ↗
21. Rheological properties of zirconium oxide suspensions in acrylate monomers for use in 3D printing10.1007/s10717-018-0028-3 ↗
22. Photosensitive ZrO2 suspensions for stereolithography10.1016/j.ceramint.2019.03.123 ↗
23. Dense 8 mol% yttria-stabilized zirconia electrolyte by DLP stereolithography10.1016/j.jeurceramsoc.2019.09.045 ↗
24. Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters
25. Preparation and properties of 0.79ZnAl2O4-0.21TiO2 microwave dielectric ceramics via digital light processing