Mg-Containing Hydroxyapatite Coatings Produced by Plasma Electrolytic Oxidation of Titanium
Source abstract
Abstract
Plasma Electrolytic Oxidation (PEO) is promising for the processing of biomaterials because it enables the production of surfaces with adjustable composition and structure. In this work, aimed at the improvement of the bioactivity of titanium, PEO has been used to grow calcium phosphide coatings on titanium substrates. The effects of the addition of magnesium acetate to the electrolytes on the composition of the coatings produced during 120 s on Ti disks using bipolar voltage pulses and solutions of calcium and magnesium acetates and sodium glycerophosphate as electrolytes have been studied. Scanning electron microscopy, X-ray energy dispersive spectroscopy, Rutherford backscattering spectroscopy, X-ray diffractometry with Rietveld refinement and profilometry were used to characterize the modified samples. Coatings composed of nearly 50 % of Mg-doped hydroxyapatite have been produced. In certain conditions up to 4% Mg can be incorporated into the coating without any observable significant structural modifications of the hydroxyapatite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Paulista State University, Brazil; Sorocaba College of Technology, Brazil
Paulista State University, Brazil
Federal University of São Carlos, Brazil
University of São Paulo, Brazil
References (55)
Show source-provided references
1. Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man10.3109/17453678108991776 ↗
2. Titanium alloys in total joint replacement-a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
3. Ultrastructure of the bone-titanium interface in rabbits
4. Osteogenesis at the dental implant interface: High-voltage electron microscopic and conventional transmission electron microscopic observations10.1002/jbm.820270612 ↗
5. Formation of hydroxyapatite on Ti-6Al-4V alloy by microarc oxidation and hydrothermal treatment10.1016/j.surfcoat.2004.10.146 ↗
6. Effect of surface topology on the osseointegration of implant materials in trabecular bone10.1002/jbm.820291213 ↗
7. In vitro biomimetic deposition of apatite on alkaline and heat treated Ti6A14V alloy surface10.1007/s12034-008-0018-0 ↗
8. Microstructure and related mechanical properties of hot pressed hydroxyapatite ceramics
9. Fracture strength of dense hydroxylapatite
10. Electrodeposition of apatite coating on pure titanium and titanium alloys10.1007/BF00776358 ↗
11. Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol-Gel Method10.1111/j.1151-2916.1999.tb01719.x ↗
12. The effect of alkali- and heat-treated titanium and apatite-formed titanium on osteoblastic differentiation of bone marrow cells10.1002/1097-4636(20001215)52:4<652::AID-JBM9>3.0.CO;2-W ↗
13. Structural characterization of pulsed laser-deposited hydroxyapatite film on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
14. Preparation of bioactive titanium metal via anodic oxidation treatment10.1016/S0142-9612(03)00626-4 ↗
15. Functionally graded Ti/HAP coatings on Ti-6Al-4V obtained by chemical solution deposition10.1016/S0272-8842(01)00055-4 ↗
16. Adhesion strength of plasma-sprayed hydroxyapatite coatings on laser gas-nitrided pure titanium10.1016/j.surfcoat.2009.03.034 ↗
17. Two zones microstructure of suspension plasma sprayed hydroxyapatite coatings10.1016/j.surfcoat.2009.09.020 ↗
18. Phase evolution of hydroxapatite coatings suspension plasma sprayed using variable parameters in simulated body fluid10.1016/j.surfcoat.2009.10.022 ↗
19. The simulation of the electrochemical cathodic Ca-P deposition process10.1016/j.msec.2008.05.016 ↗
20. Electrochemical cathodic deposition of hydroxyapatite: improvements in adhesion and crystallinity10.1016/j.msec.2008.10.015 ↗
21. Characterization of fluoridated hydroxyapatite/zirconia nano-composite coating deposited by a modified electrocodeposition technique10.1016/j.surfcoat.2010.01.042 ↗
22. Biomimetic Ca-P coating on pre-calcified Ti plates by electrodeposition method10.1016/j.apsusc.2009.11.004 ↗
23. Preparation of dense ß-CaSiO3 ceramic with high mechanical strength and HAp formation ability in simulated body fluid10.1016/j.jeurceramsoc.2005.03.247 ↗
24. Preparation and characterization of silicon-substituted hydroxyapatite coating by a biomimetic process on titanium substrate10.1016/j.surfcoat.2008.09.038 ↗
25. The interfacial study of sol-gel-derived fluoridated hydroxyapatite coatings10.1016/j.surfcoat.2004.10.024 ↗
26. Adhesion strength of sol-gel derived fluoridated hydroxyapatite coatings10.1016/j.surfcoat.2005.11.033 ↗
27. In situ synthesis and fabrication of tricalcium phosphate bioceramic coating on commercially pure titanium by laser rapid forming10.1016/j.surfcoat.2010.04.062 ↗
28. Changes in phases and crystallinity of plasma-sprayed hydroxyapatite coatings under heat treatment: A quantitative study10.1002/jbm.820291204 ↗
29. In vivo tensile testing of fluorapatite and hydroxylapatite plasma-sprayed coatings10.1002/jbm.820280506 ↗
30. Hydroxyapatite formation on oxide films containing Ca and P by hydrothermal treatment10.1016/j.ceramint.2005.04.006 ↗
31. Bone graft substitutes in orthopaedic surgery
32. Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review10.1016/j.actbio.2011.11.017 ↗
33. Elliott JC · 1994 · 111
34. Dissolution studies of Zn-containing carbonated hydroxyapatites10.1016/S0022-0248(00)00608-4 ↗
35. Synthese, caractérisation et thermochimie d'apatites calco-magnésiennes hydroxylées et fluorées10.1016/S0040-6031(01)00565-2 ↗
36. Some physico-chemical aspects of hydroxyapatite10.1007/BF00355120 ↗
37. Gaines RV · 1997
38. Microstructural, mechanical, and osteocompatibility properties of Mg2+/F- doped nanophase hydroxyapatite10.1002/jbm.a.32745 ↗
39. Magnesium influence on hydroxyapatite crystallization10.1016/0162-0134(93)80049-F ↗
40. Effects of magnesium on the formation of calcium deficient hydroxyapatite from CaHPO4.2H2O and Ca4(PO4)2O10.1002/(SICI)1097-4636(19970905)36:3<306::AID-JBM5>3.0.CO;2-I ↗
41. Calcium phosphates in oral biology and medicine
42. Bone health & osteoporosis
43. Preparation and characterization of magnesium-calcium hydroxyapatites10.1039/JM9960601401 ↗
44. Crystallographic behavior of fluoridate hydroxyapatites containing Mg2+ and CO2-3 Ions10.1016/0142-9612(91)90070-Q ↗
45. Synthesis of Si, Mg, substituted hydroxyapatites and their sintering behaviors10.1016/S0142-9612(02)00523-9 ↗
46. Magnesium deficiency and osteoporosis: animal and human observations10.1016/j.jnutbio.2004.08.001 ↗
47. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy10.1016/S0257-8972(00)00719-2 ↗
48. Characterization and formation of hydroxyapatite on Ti6Al4V coated by plasma electrolytic oxidation10.1016/j.jallcom.2012.11.024 ↗
49. Characterization of Magnesium-Doped Hydroxyapatite Prepared by Sol-Gel Process10.1111/ijac.12093 ↗
50. The tribological properties of bioceramic coatings produced on Ti6Al4V alloy by plasma electrolytic oxidation10.1016/j.ceramint.2013.09.062 ↗
51. Hydroxyapatite coating deposited on grade 4 Titanium by Plasma Electrolytic Oxidation10.1590/1516-1439.286914 ↗
52. Algorithms for the rapid simulation of Rutherford backscattering spectra10.1016/0168-583X(85)90762-1 ↗
53. Measurement of He and H depth profiles in tungsten using ERDA with medium heavy ion beams10.1016/j.nimb.2011.04.075 ↗
54. Crystallographic and chemical properties of Mg-containing apatites before and after suspension in solutions
55. Biomimetic Mg-and Mg,CO3-substituted hydroxyapatites: synthesis characterization and in vitro behavior10.1016/j.jeurceramsoc.2005.06.040 ↗