Effect of Magnetically Treated Tap Water Quenchant on Hardenability of S45C Steel
Source abstract
Abstract
The objective of this work was to investigate effects of magnetically treated tap water quenchant on hardenability and quenching crack resistance of S45C steel. The magnetically treated water quenchant was prepared by circulating regular tap water though a 130 mT magnetic field. The S45C steel was austenized at 860°C for 30 minutes. The hardenability in transverse section measurement of S45C steel quenched in magnetically treated tap water did not differ from that prepared with regular tap water quenchant. In measurements of the quenched end, the hardenability of S45C Steel quenched in magnetically treated water was below that with tap water quenchant. On the other hand, quenching crack resistance of S45C steel quenched in magnetically treated tap water was higher than that prepared with regular tap water. Moreover, microstructures of specimens quenched in magnetically treated tap water quenchant were different from that with regular tap water quenchant. Fine martensite structure formed in specimen quenched in regular tap water quenchant, while coarse lath martensite formed in specimens quenched in magnetically treated tap water quenchant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic and Electromagnetic Effects · Magnetic Properties of Alloys · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Prince of Songkla University, Thailand
References (20)
Show source-provided references
1. The flexible heat treatment of automotive components in a novel type of pusher furnace
2. Handbook ASM · 1991 · 4
3. Rajan TV · 2011
4. Effect of an electric field applied during the quenching on hardness of carbon steel10.1016/j.msea.2007.11.085 ↗
5. Chandler H · 1995
6. Effects of applying an external magnetic field during the deep cryogenic heat treatment on the corrosion resistance and wear behavior of 1.2080 tool steel10.1016/j.matdes.2012.03.045 ↗
7. Thermodynamic and kinetic characteristics of the austenite-to-ferrite transformation under high magnetic field in medium carbon steel10.1016/j.jmmm.2004.07.058 ↗
8. Effects of a static magnetic field on water and electrolyte solutions10.1016/j.jcis.2007.08.026 ↗
9. The changes of macroscopic features and microscopic structures of water under influence of magnetic field10.1016/j.physb.2008.05.032 ↗
10. The effects of magnetic fields on water molecular hydrogen bonds10.1016/j.molstruc.2009.08.037 ↗
11. Effects of static magnetic field on water at kinetic condition10.1016/j.cep.2010.12.005 ↗
12. Magnetic water treatment for scale prevention10.1016/S0043-1354(01)00010-0 ↗
13. Quenching characteristics of glycerol solution as a potential new quenchant. Int10.1016/j.ijheatmasstransfer.2017.02.013 ↗
14. Influence of magnetic field on physical–chemical properties of the liquid water: insights from experimental and theoretical models10.1016/j.molstruc.2008.01.010 ↗
15. Effect of magnetic field on the physical properties of water10.1016/j.rinp.2017.12.022 ↗
16. Numerical – Experimental correlation of microstructures, cooling rates and mechanical properties of AISI 1045 steel during the Jominy end-quench test10.1016/j.matdes.2015.03.031 ↗
17. Correlation between thermal properties and hardness of end-quench bars for C48, 42CrMo4 and 35NiCrMo16 steels10.1016/j.tca.2008.04.008 ↗
18. Eliminate quench cracking with uniform agitation
19. Failure analysis and prevention of quench crack of eccentric holed disk by experimental study and computer simulation10.1016/j.engfailanal.2008.01.010 ↗
20. Blackwood RR. · 1998 · 575