journal article·2023Open access

Effect of Aging Temperature on Plastic Flow Behaviour and Toughness of Nickel Free High Nitrogen Austenitic Stainless Steels

K Krishna Kumar, J Anburaj, R Subramanian

Materials Research· Volume 26

Abstract

In the present study, tensile properties, plastic flow behaviour and impact toughness of Nickel free High Nitrogen Austenitic Stainless Steels (NFHNSS) were evaluated under solution annealed and aged condition (at 700 oC, 800 oC and 900 oC for 14 hours). Plastic flow behaviour was analyzed using Holloman and Ludwigson flow equations. Samples in solution annealed and aged conditions exhibited a flow transition behaviour. Ludwigson flow equation produces best fit for flow transition behaviour. Transmission Electron Microscope (TEM) investigations of NFHNSS samples after tensile test revealed dislocation network and planar arrangement of dislocations adjancent to Grain Boundaries (GB) in the solution annealing and aged conditions respectively. Plastic deformation of NFHNSS occurs by a combination of planar glide and twinning. Impact energy was significantly higher in solution annealed condition than aged condition. Impact energy values decreased with increasing aging temperature. Precipitation and growth as well as morphology of Cr2N at the GBs reduce the impact energy values significantly. Presence of larger precipitates readily pull out from GB easily than smaller precipitates at low temperatures. Large precipitate, at the GB’s readily pull out at low temperature, compared to slower ones.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PSG College of Technology, India

References (19)

Show source-provided references
1. A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications10.1016/j.msec.2013.06.002 ↗
2. Experimental and computational study of nitride precipitation in a CrMnN austenitic stainless steel10.1016/j.msea.2016.12.071 ↗
3. Impact toughness properties of nickel-free austenitic stainless steels10.1016/j.msea.2008.05.022 ↗
4. Time-temperature-precipitation characteristics of high-nitrogen austenitic Fe−18Cr−18Mn−2Mo−0.9N steel10.1007/s11661-006-1040-8 ↗
5. Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system10.1007/s11661-000-0271-3 ↗
6. Design of a new Ni-free austenitic stainless steel with unique ultra high strength-high ductility synergy10.1016/j.matdes.2014.06.069 ↗
7. Cyclic deformation behavior of Fe-18Cr-18Mn-0.63N nickel-free high-nitrogen austenitic stainless steel10.1007/s11661-015-2769-8 ↗
8. Effect of aging and oxidation on strain hardening behaviour of a nickel-free high nitrogen austenitic stainless steel10.1007/s12540-016-5611-y ↗
9. Plastic flow behavior and its relationship to tensile mechanical properties of high nitrogen nickel-free austenitic stainless steel10.1016/j.msea.2016.03.057 ↗
10. Modified stress-strain relation for FCC metals and alloys10.1007/BF02813258 ↗
11. Kinetics of Cr2N precipitation and its effect on pitting corrosion of Nickel-Free High-Nitrogen Austenitic Stainless Steel10.1007/s11665-020-05098-w ↗
12. Nitrogen in chromium-manganesestainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics10.1088/1468-6996/14/3/033001 ↗
13. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
14. Ageing of forged super austenitic stainless steel: precipitate phases and mechanical properties10.1016/j.msea.2011.12.048 ↗
15. Characterization of dislocation structure in a Nb-bearing austenitic stainless steel after low cycle fatigue via TEM and EBSD10.1590/1980-5373-mr-2021-0401 ↗
16. Influence of strain rate on the tensile properties of metastable austenitic stainless CrNi and CrMnNi spring steels10.1016/j.msea.2022.143507 ↗
17. Evaluation of strain-induced martensite formation and mechanical properties in N-alloyed austenitic stainless steels by in situ tensile tests10.1016/j.msea.2021.140930 ↗
18. Dynamic strain aging mechanisms in a metastable austenitic stainless steel10.1016/j.actamat.2021.116888 ↗
19. Quasi-in-situ observations of crack propagation and microstructure evolution of high manganese austenitic steel at −196 °C10.1016/j.engfracmech.2022.108509 ↗