Determining Thermal Parameter Windows of 40Cr10Si2Mo Steel from an Enhanced Processing Map
Source abstract
Abstract
The properties of a hot-deformed component can be enhanced by planning its forming process within the desired thermal processing-parameter windows associated with dynamic recrystallization (DRX). In order to determine the windows of 40Cr10Si2Mo steel, hot compression tests were employed within the deformation conditions of 1173-1398 K and 0.01-10 s-1. Following this, the hot processing maps, which distinguished the parameter domains with stable plastic deformation, were established according to the stress-strain data. The DRX domains were further identified within the stable deformation domains and represented as a map illustrating the deformation mechanisms of this steel. The deformation activation energy, which describes the forming difficulty degree of material, was calculated, and its evolution map with parameters was constructed. The deformed microstructures were characterized utilizing a scanning electron microscope (SEM) to verify the deformation mechanism map. An enhanced processing map which superimposed the activation energy map over the deformation mechanism map, was developed. The resulting map facilitated the determination of optimal windows that ensure DRX mechanism and lower activation energy. The optimal windows for 40Cr10Si2Mo steel were finally obtained as: 1322-1398 K & 0.016-0.35 s-1 and 1344-1380 K & 0.035-0.126 s-1.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Chongqing University, China; Huan Ding Intelligent Technology, China
Chongqing University, China
Chongqing University, China; Sichuan Engineering Vocational and Technical College, China
References (26)
Show source-provided references
1. Toughness evolution of 9Cr–3W–3Co martensitic heat resistant steel during long time aging10.1016/j.msea.2015.09.115 ↗
2. Microstructural evolution of Nimonic 80a during hot forging under non-isothermal conditions of screw press10.1016/j.jmatprotec.2017.09.014 ↗
3. Separation of dynamic recrystallization parameter domains from a chaotic system for Ti–6Al–4V alloy and its application in parameter loading path design10.1016/j.msea.2019.138745 ↗
4. Response surface of speed-loading path to grain refinement during current-heating compression at SAE 5137H steel10.3390/ma15103484 ↗
5. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
6. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
7. Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy10.1016/j.jallcom.2014.10.034 ↗
8. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies10.1016/j.jallcom.2016.10.029 ↗
9. Hot deformation behavior and processing map of Ti-6Al-6V-2Sn titanium alloy
10. Hot deformation behavior and processing parameters optimization of SP700 titanium alloy10.1016/j.jmrt.2021.09.118 ↗
11. Modified constitutive model and workability of 7055 aluminium alloy in hot plastic compression10.1007/s11771-019-4225-1 ↗
12. Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map10.1016/j.jallcom.2017.04.156 ↗
13. A revisited study of the processing map and optimized workability of AZ61 magnesium alloy10.1007/s11665-017-2670-2 ↗
14. Hot deformation behaviors and processing maps of Mg–Zn–Er alloys based on Gleeble–1500 hot compression simulation10.1016/S1003-6326(16)64444-8 ↗
15. Characterization of the forgeability of 1Cr11Ni2W2MoV steel using processing map10.1016/j.msea.2010.07.003 ↗
16. Hot deformation characteristics—constitutive equation and processing maps—of 21-4N heat-resistant steel10.3390/ma12010089 ↗
17. Correspondence between microstructural evolution mechanisms and hot processing parameters for Ti-13Nb-13Zr biomedical alloy in comprehensive processing maps10.1016/j.jallcom.2016.12.140 ↗
18. Processing map for controlling microstructure and unraveling various deformation mechanisms during hot working of CoCrFeMnNi high entropy alloy10.1016/j.msea.2020.139840 ↗
19. Hot deformation behavior and microstructural evolution of the Al-Cu-Li alloy: a study with processing map10.1016/j.jallcom.2022.167755 ↗
20. Determination of dynamic recrystallization parameter domains of Ni80A superalloy by enhanced processing maps10.1016/S1003-6326(19)65052-1 ↗
21. Characterization of hot workability of 5052 aluminum alloy based on activation energy-processing map10.1007/s11665-019-04367-7 ↗
22. Evaluation of hot deformation characteristics in modified AA5052 using processing map and activation energy map under deformation heating10.1016/j.jallcom.2017.12.357 ↗
23. Flow behavior and processing map for hot deformation of W-1.5ZrO2 alloy10.1016/j.jallcom.2019.06.179 ↗
24. Characterization of hot processing parameters of powder metallurgy TiAl-based alloy based on the activation energy map and processing map10.1016/j.matdes.2015.07.140 ↗
25. Processing maps: a status report10.1361/105994903322692420 ↗
26. Hot workability integrating processing and activation energy maps of Inconel 740 superalloy10.1016/j.mtcomm.2018.01.009 ↗