Tin Dioxide-Based Photoanodes Integrated Into the Dye Sensitized Solar Cells Structure
Source abstract
Abstract
This academic article investigates the performance of dye-sensitized solar cells (DSSCs), which are affected by various defects like charge recombination, high impedance, and low power conversion efficiency due to complex physicochemical phenomena. The study explores different materials and processes to enhance DSSC performance, with a focus on photoanode development. Tin dioxide, tin chloride II dihydrate, copper oxide, boric acid, and sodium phosphate are utilized to fabricate the photoanodes. A thermal treatment at 450°C for 30 minutes precedes dye assembly on the photoanode surface. Results show that the tin chloride II dihydrate-modified photoanode outperforms others, achieving higher open-circuit voltage (0.50V), current density (9.58 mAcm-2), fill factor (0.37), and power conversion efficiency (1.77%). The study suggests that tin salt particles positively impact voltage, current, electron transport, and charge separation, enhancing overall cell performance. Charge recombination significantly affects power conversion efficiency and impedance, but accurately quantifying it remains challenging. Lower recombination levels favor efficiency, while higher levels reduce it.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Núcleo de Tecnologia e Qualidade Industrial do Ceará, Brasil; Universidade Federal do Ceará, Brasil
Universidade Federal do Ceará, Brasil
Instituto Federal de Educação, Brasil
Núcleo de Tecnologia e Qualidade Industrial do Ceará, Brasil
References (50)
Show source-provided references
1. A low-cost, high-efficiency solar cell basead on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Fabrication of n-p junction electrodes made of n-type SnO2 and p-type NiO for control of charge recombination in dye sensitized solar cells10.1016/j.solmat.2003.11.027 ↗
3. The interconnected CaCO3 coated SnO2 nanocrystalline dye-sensitized solar cell with superior performance10.1016/j.electacta.2011.01.110 ↗
4. Electrodeposition of arborous structure nanocrystalline SnO2 and application in flexible dye-sensitized solar cells10.1016/j.jallcom.2011.10.116 ↗
5. Modeling diffusion of tin into the mesoporous titanium dioxide layer of a dye-sensitized solar cell photoanode10.1021/jp3061366 ↗
6. Review on dye-sensitized solar cells (DSSCs): fundamental concepts and novel materials10.1016/j.rser.2012.04.044 ↗
7. Design of dye-sensitized solar cells integrated in composite panel subjected to bending10.1177/0021998312459779 ↗
8. Performance improvement of a tin(II) dioxide-modified electrode for the dye-sensitized solar cell by the addition of zinc(II) oxide and niobium(V) oxide10.1016/j.ica.2012.10.033 ↗
9. Low-temperature synthesis of tin dioxide hollow nanospheres and their potential applications in dye-sensitized solar cells and photoelectrochemical type self-powered ultraviolet photodetectors10.1016/j.jpowsour.2014.09.021 ↗
10. Reversely fabricated dye-sensitized solar cells10.1039/C3RA45507F ↗
11. Controlled synthesis of tin dioxide nanostructures via two simplemethods and the influence on dye sensitized solar cell10.1016/j.electacta.2014.02.078 ↗
12. Spraying distance and titanium chloride surface treatment effects on DSSC performance of electrosprayed SnO2 photoanodes10.1039/C4RA02679A ↗
13. Significant enhancement of power conversion efficiency for dye sensitized solar cell using 1D/3D network nanostructures as photoanodes
14. Tin oxide as a photoanode for dye-sensitised solar cells: current progress and future challenges10.1016/j.jpowsour.2015.06.037 ↗
15. Influence of geometrical thickness of SnO2 based photoanode on the performance of Eosin-Y dye sensitized solar cell10.1016/j.optmat.2015.09.015 ↗
16. Effect of photoanode design on the photoelectrochemical performance of dye-sensitized solar cells based on SnO2 nanocomposite
17. Inhibition of charge recombination for enhanced dye-sensitized solarcells and self-powered UV sensors by surface modification10.1016/j.apsusc.2016.07.078 ↗
18. Incorporation of graphene into SnO2 photoanodes for dye-sensitized solar cells10.1016/j.apsusc.2016.06.146 ↗
19. Influence of sprayed nanocrystalline Zn-doped TiO2 photoelectrode with the dye extracted from Hibiscus Surattensis as sensitizer in dye- sensitized solar cell10.1016/j.ceramint.2016.04.020 ↗
20. Towards renewable iodide sources for electrolytes in dye-sensitized solar cells
21. Modeling of interfacial and bulk charge transfer in dye-sensitized solar cells
22. Hydrothermal growth of one-dimensional Ce-doped TiO2 nanostructures for solid-state DSSCs comprising Mg-doped CuCrO210.1007/s10853-016-0348-z ↗
23. An insight into titania nanopowders modifying with manganese ions: a promising route for highly efficient and stable photoelectrochemical solar cells10.1016/j.solener.2017.08.010 ↗
24. Structural, morphological and optical properties of SnO2 nanoparticles obtained by a proteic sol-gel method and their application in dye-sensitized solar cells10.1007/s10971-017-4488-7 ↗
25. Novel ZnO decorated SnO2 nanosheet for dye sensitized solar cell applications10.1016/j.ijleo.2017.11.092 ↗
26. Enhanced photovoltaic performance of dye sensitized solar cell using SnO2 nanoflowers10.1016/j.optmat.2017.11.023 ↗
27. Progress in the performance of dye sensitized solar cells by incorporating cost effective counter electrodes10.1016/j.solener.2017.11.060 ↗
28. Enhanced photovoltaic conversion efficiency in dye-sensitized solar cells based on photoanode consisting of TiO2/GO/Ag nanofibers10.1016/j.vacuum.2019.05.022 ↗
29. Building and testing a spin coater for the deposition of thin films on DSSCs10.1590/1980-5373-mr-2020-0214 ↗
30. Enhanced performance of dye-sensitized solar cell with thermally stable natural dye-assisted TiO2/MnO2 bilayer-assembled photoanode10.1007/s40243-020-00185-3 ↗
31. Spinel oxide incorporated photoanode for better power conversion efficiency in dye-sensitized solar cells10.1016/j.ijleo.2021.167976 ↗
32. Selective sensitization strategy for high-performance panchromatic dye-sensitized solar cells incorporated with ruthenium-based double dyes10.1016/j.jiec.2022.08.008 ↗
33. Enhancement in the performance of Dye Sensitized Solar Cells (DSSCs) by incorporation of Reduced Graphene Oxide (RGO) and Carbon Nanotubes (CNTs) in ZnO nanostructures10.3390/inorganics10110204 ↗
34. Lithium incorporation into TiO2 photoanode for performance enhancement of dye-sensitized solar cells10.1021/acsaem.3c01579 ↗
35. Improving performance of dye sensitized solar cell (DSSC) by incorporating rGO to TiO2 based photoanode10.1063/5.0114970 ↗
36. Bandgap engineering of CuO/TiO2 nanocomposites and their synergistic effect on the performance of dye-sensitized solar cells10.1016/j.optmat.2024.114896 ↗
37. Hydroxamic acid pre-adsorption raises the efficiency of cosensitized solar cells10.1038/s41586-022-05460-z ↗
38. High performance SnO2 pure photoelectrode in dye-sensitized solar cells achieved via electrophoretic technique10.1016/j.solener.2020.09.076 ↗
39. Raman studies of the intermediate tin-oxide phase
40. Experimental spectroscopic data of SnO2 films and powder10.3390/data8020037 ↗
41. Formation of SnO and SnO2 phases during the annealing of SnO (x) films obtained by molecular beam epitaxy10.1016/j.apsusc.2020.145735 ↗
42. Solution-phase growth of tin oxide (SnO2) nanostructures: structural, optical and photocatalytic properties10.1016/j.mseb.2020.114568 ↗
43. Effect of solution pH on structural, optical and morphological properties of SnO2 nanoparticles
44. Impact of sintering temperature on crystallite size and optical properties of SnO2 nanoparticles10.1088/1742-6596/1829/1/012030 ↗
45. Effects of gamma radiation on structural, optical, and electrical properties of SnO2 thin films10.1016/j.apsadv.2023.100406 ↗
46. Effect of iron doping on ESR and Raman spectra of SnO2 nanomaterials10.1016/j.matpr.2019.12.225 ↗
47. Experimental spectroscopic data of SnO2 films and powder10.3390/data8020037 ↗
48. Crystal structure, Raman spectroscopy and optical property study of Mg-Doped SnO2 compounds for optoelectronic devices10.3390/cryst13060932 ↗
49. Investigations of structural, optical and transport property of Sb-doped SnO2 compounds for optoelectronics application10.1016/j.ijleo.2023.171210 ↗
50. The impact of SnO2 photoelectrode’s thickness on photovoltaic properties of the solar cell FTO: SnO2: PTB7-TH: ITIC/Mo/Ag10.31489/2022ph2/86-91 ↗