Production and Characterization of Pb-Carbon Composite for Manufacturing Metal Grids Applied in Lead-Acid Batteries
Source abstract
Abstract
For decades, lead-acid batteries have been supplying power to electrical systems through redox reactions involving Pb and PbO2. However, the energy supply capacity is inherently constrained by low energy density and challenges associated with charge/discharge cycles. Studies have indicated that additions of C to the composition of the active mass improve the electrochemical properties of batteries. This work aims to produce, characterize the microstructure and evaluate the electrochemical properties of Pb-Carbon composites, comparing different types of C (graphite, graphene and xerogel). The samples were produced through powder metallurgy, pressed at 550 MPa and sintered at 320°C-48 h. The microstructure was characterized by XRD, SEM/EDS, and Vickers microhardness. Electrochemical analyses were evaluated through OCP, polarization, and cyclic voltammetry (CV) measurements in a solution of 4.91 mol•L-1 of H2SO4. Microstructural characterizations revealed dispersions of C particles in the Pb matrix and an increase in the microhardness of the composites. Electrochemical analyses showed an increase in polarization resistance and a reduction in the corrosion rate compared to Pb. CV curves, demonstrated that C particles enhanced electrical conductivity for the formation of PbSO4 and PbO2, allowing greater absorption of electrical overpotentials when compared to Pb, thereby improving charge/discharge cycles in positive grids.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Extraction and Separation Processes · Supercapacitor Materials and Fabrication · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade de São Paulo, Brasil
Instituto SENAI de Inovação em Eletroquímica, Brasil
Universidade do Estado do Rio de Janeiro, Brasil
References (23)
Show source-provided references
1. The challenge to fulfill electrical power requirements of advanced vehicles10.1016/j.jpowsour.2003.09.002 ↗
2. Battery grid alloys: principles and practice
3. Consequences of including carbon in the negative plates of Valve-regulated Lead–Acid batteries exposed to high-rate partial-state-of-charge operation10.1016/j.jpowsour.2008.08.084 ↗
4. Valve regulated lead-acid batteries10.1016/S0378-7753(01)00881-3 ↗
5. Sanhueza AEC · 2007
6. Bode H · 1997
7. Singh PK · 2020
8. Kitoronka S · 2022
9. Failure mode of valve–regulated lead–acid batteries under high–rate partial–state–of–charge operation10.1016/j.jpowsour.2003.11.048 ↗
10. Lead-acid battery research and development: a vital key to winning new business10.1016/S0378-7753(02)00700-0 ↗
11. Novel lead-graphene and lead-graphite metallic composite materials for possible application as positive electrode grid in lead-acid battery10.1016/j.jpowsour.2014.12.036 ↗
12. Highly reversible lead-carbon battery anode with lead grafting on the carbon surface10.1016/j.jechem.2018.03.002 ↗
13. 1999
14. Effect of temperature on the growth of α-PbO 2 nanostructures10.1016/j.electacta.2010.07.073 ↗
15. New lead alloy anodes and organic depolariser utilization in zinc electrowinning10.1016/S0304-386X(96)00060-6 ↗
16. Effect of ternary addition on characteristics of Pb-Sn base alloys
17. Wolynec S · 2003
18. Analysis of the role of electrode capacitance on the initiation of pits for A516 carbon steel by electrochemical noise measurements10.1016/S0010-938X(98)00181-4 ↗
19. Arya SB · 2021 · 4310.1016/B978-0-12-818916-0.00003-1 ↗
20. Disruption processes in films grown and reduced electrochemically on metals10.1007/s10008-007-0361-x ↗
21. Some recent developments in electrochemical nucleation-growth-collision theory10.1016/S0022-0728(81)80558-X ↗
22. The mechanisms for the growth of the anodic Pb(II) oxides films formed on Pb–Sb and Pb–Sn alloys in sulfuric acid solution10.1016/S0378-7753(01)00839-4 ↗
23. Dissolution and precipitation reactions of lead sulfate in positive and negative electrodes in lead acid battery10.1016/S0378-7753(99)00378-X ↗