journal article·2014-05-20Open access

Electrical, mechanical, and thermal analysis of natural rubber/polyaniline-Dbsa composite

Michael Jonas da Silva, Aléx Otávio Sanches, Luiz Francisco Malmonge, José Antonio Malmonge

Materials Research· Volume 17· Issue suppl 1

Abstract

A composite of natural rubber (NR) with polyaniline (PANI) was obtained by mixing an aqueous dispersion of dodecylbenzenesulfonic acid (DBSA)-doped PANI with NR latex in different concentrations. Films were obtained by the casting method and characterized by ultraviolet visible near-infrared (UV-Vis-NIR) spectroscopy, thermogravimetry/differential thermogravimetry (TG/DTG), stress-strain testing, differential scanning calorimetry (DSC), and DC electrical conductivity measurements. The UV-vis-NIR spectrum showed that PANI remained doped in the composite, and this improved the mechanical and electrical proprieties of NR films and afforded them good thermal stability up to ~200ºC. The percolation threshold did not follow the universal critical exponent, and in this case, conduction preferentially occurs by hopping and tunneling.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Univ Estadual Paulista, Brazil

References (32)

Show source-provided references
1. Thermal studies of polyaniline doped with dodecyl benzene sulfonic acid directly prepared via aqueous dispersions10.1023/A:1021395726060 ↗
2. Progress in preparation, processing and applications of polyaniline10.1016/j.progpolymsci.2009.04.003 ↗
3. Electrically conductive nanocomposites made from cellulose nanofibrils and polyaniline
4. Morphological studies of DBSA-doped polyaniline/PVC blends10.1093/jmicro/dfq050 ↗
5. Conductive nanocomposites based on cellulose nanofibrils coated with polyaniline-DBSA via In Situ polymerization10.1002/masy.201100156 ↗
6. Conductive blends of thermally dodecylbenzene sulfonic acid-doped polyaniline with thermoplastic polymers10.1002/(SICI)1097-4628(19971010)66:2<243::AID-APP5>3.0.CO;2-W ↗
7. Synthesis of conductive adhesives based on epoxy resin and polyaniline: DBSA using the in situ polymerization and physical mixing procedures10.1016/j.synthmet.2010.07.021 ↗
8. A comparative study of epoxy and polyurethane based coatings containing polyaniline-DBSA pigments for corrosion protection on mild steel10.1016/j.porgcoat.2013.02.010 ↗
9. Dc and Ac conductivity of polyaniline/poly(methyl methacrylathe) blends below the percolation threshold10.1016/j.matchemphys.2012.04.033 ↗
10. Compósitos de borracha natural com polianilina10.1590/S0104-14282007000200007 ↗
11. Dependence of the electrical conductivity and elastomeric properties on sample preparation of blends of polyaniline and natural rubber10.1002/app.21899 ↗
12. Electrical conductivity and mechanical properties of polyaniline/natural rubber composite fibers10.1002/app.27101 ↗
13. Comparative study on the technological properties of latex and natural rubber from hancornia speciosa gomes and Hevea brasiliensis10.1002/app.29316 ↗
14. On the prospects of conducting polyaniline/natural rubber composites for electromagnetic shielding effectiveness applications
15. Dielectric behavior of natural rubber composites in microwave fields10.1002/app.25420 ↗
16. Synthesis and characterization of polyaniline rubber composites10.1016/j.compscitech.2008.02.001 ↗
17. Electrochemical synthesis of conducting natural rubber nanocomposite films10.1179/1743289812Y.0000000050 ↗
18. Novel peroxide-vulcanized NBR-PAni.DBSA blends, part 1: preparation and characterization10.1002/app.29619 ↗
19. Preparation and characterization of polyaniline nanoparticles synthetized from DBSA micellar solution10.1016/S0379-6779(01)00494-5 ↗
20. Reversed micelle polymerization: a new route for the synthesis of DBSA-polyaniline nanoparticles10.1016/j.colsurfa.2005.02.017 ↗
21. Thermal degradation mechanism of dodecylbenzene sulfonic acid- hydrochloric acid co-doped polyaniline10.1016/j.polymdegradstab.2009.06.011 ↗
22. A conductive rubber based on EPDM and polyaniline I: Doping effect10.1016/S0014-3057(00)00235-4 ↗
23. The in situ polymerization of aniline in nitrile rubber10.1016/j.synthmet.2005.09.045 ↗
24. Conducting elastomer blends based on nitrile rubber and Pani.DBSA10.1002/masy.200690033 ↗
25. Effect of natural rubber latex on the conducting state of polyaniline blends determined by Raman spectroscopy10.1002/jrs.1060 ↗
26. Evaluation of latex from five Hevea clones grown in São Paulo State, Brazil10.1016/S0040-6031(02)00225-3 ↗
27. Water harvesting using a conducting polymer: a study by molecular dynamics simulation10.1103/PhysRevE.79.061801 ↗
28. Mechanism of charge transport in castor oil-based polyurethane/carbon black composite (PU/CB)10.1016/j.jnoncrysol.2011.09.032 ↗
29. Percolation and conduction10.1103/RevModPhys.45.574 ↗
30. Measurement and interpretation of nonuniversal critical exponents in disordered conductor-insulator composites10.1103/PhysRevB.52.12477 ↗
31. Alternating-current electrical properties of graphite, carbon Black and carbon-fiber polymeric composites10.1016/S0266-3538(00)00176-7 ↗
32. Electrical Field dependence of conductivity and critical exponent of it for carbon black-resin composites10.1049/cp:19960999 ↗