Ballistic Behavior of New Alumina Composites Reinforced with Niobo-Phosphate Glass
Source abstract
Abstract
This work aimed to produce and evaluate the ballistic behavior of niobo-phosphate glass-doped alumina composites. The niobo-phosphate glass (30% Nb2O5- 30% P2O5- 20% CaO - 20% CaF2, by mol) were added to the alumina in six different weight percentages. The composite with the highest densification, measured by the Archimedes assay, was used for the ballistic tests. X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray spectroscopy by dispersive energy (EDX) were also performed. The sintered samples were enveloped on two 1020 steel plates for the residual velocity test. The best results of densification were obtained for the niobo-phosphate glass addition of 4 wt%, which was not detected the AlPO4 phase formation. From the residual velocity test, it was observed a better energy absorption for the doped alumina, in relation to pure alumina. Therefore, it is indicated that the niobo-phosphate glass addition of 4 wt% worked properly as sintering aid for alumina, enhancing its properties and performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Glass properties and applications · Advanced ceramic materials synthesis · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Militar de Engenharia, Brasil; Universidade Candido Mendes, Brasil
Instituto Militar de Engenharia, Brasil
Instituto Militar de Engenharia, Brasil; R-Crio Criogenia S/A, Brasil
References (33)
Show source-provided references
1. Nanomechanical properties of zirconia- yttria and alumina zirconia-yttria biomedical ceramics, subjected to low-temperature aging10.1016/j.ceramint.2016.12.033 ↗
2. Improvement of densification and mechanical properties of Al2O3-B4C ceramics10.1016/j.ceramint.2016.04.025 ↗
3. Mechanical behaviour of reaction processed SiC ceramics from artificial precursor from plant10.1016/j.ceramint.2016.03.109 ↗
4. The size-effect of Al2O3 on the sinterability, microstructure and properties of glass-alumina composites10.1134/S1087659615050041 ↗
5. ZrB2-SiC laminated ceramic composites10.1016/j.jeurceramsoc.2011.04.020 ↗
6. Pore morphology designs of porous Si3N4-based ceramics using Si3N4 and Al2O3 poly-hollow microspheres as pore-forming agents10.1016/j.matlet.2015.01.010 ↗
7. Lightweight alumina based fibrous ceramics with different high temperature binder10.1016/j.ceramint.2016.03.170 ↗
8. Densification Behavior and Mechanical Properties of Niobium-Oxide-Doped Alumina Ceramics
9. Effect of nanometer Al2O3 powder on microstructure and properties of alumina ceramics by microwave sintering10.1016/j.msea.2012.03.072 ↗
10. Effect of ceramic bonding phases on the thermo-mechanical properties of Al2O3-C refractories10.1016/j.ceramint.2013.01.024 ↗
11. Alternative route for the synthesis of high surface-area ?-Al2O3/Nb2O5 catalyst from aluminum waste10.1016/j.matchemphys.2016.08.032 ↗
12. Microwave dielectric properties study of (Al2O3)-(Nb2O5) composite for dielectric resonator antenna applications10.1002/mop.29816 ↗
13. Preparation and characterization of Nb2O5-Al2O3 composite oxide formed by cathodic electroplating and anodizing10.1016/j.mseb.2011.07.021 ↗
14. Ballistic behavior of alumina with niobia additions10.1051/jp4:2006134154 ↗
15. Processing and Properties of Niobia-Doped Alumina Sintered at 1400ºC
16. Visible Light Transparency for Polycrystalline Ceramics of MgO-2Al2O3 and MgO-2.5Al2O3 Spinel Solid Solutions10.1111/jace.12636 ↗
17. The Effect of Varied Amounts of LiF Sintering Aid on the Transparency of Alumina Rich Spinel Ceramic with the Composition MgO · 1.5 Al2O310.1111/j.1551-2916.2012.05217.x ↗
18. Effect of LiF as Sintering Agent on the Densification and Phase Formation in Al2O3-4wt%Nb2O5 Ceramic Compound10.1007/s11661-017-4271-y ↗
19. Mechanical properties and ballistic behavior of LiF-added Al2O3-4wt%Nb2O5 ceramics10.1016/j.jmrt.2018.09.005 ↗
20. Shock Induced Localized Amorphization in Boron Carbide10.1126/science.1080819 ↗
21. Historical review of high strain rate and shock properties of ceramics relevant to their application in armour10.1179/174367609X422180 ↗
22. Ballistic performance of armour ceramics: Influence of design and structure10.1016/j.ceramint.2010.05.021 ↗
23. Blindagens cerâmicas para aplicações balísticas: uma revisão10.1590/S0366-69132014000300003 ↗
24. Ballistic performance of Al2O3 mosaic armors with gap-filling materials10.1016/j.ceramint.2016.11.087 ↗
25. How effective is a convex Al2O3-Nb2O5 ceramic armor10.1016/j.ceramint.2015.12.147 ↗
26. Natural Cuarua Fiber-Reinforced Composites in Multilayered Ballistic Armor10.1007/s11661-015-3032-z ↗
27. Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric10.1590/1516-1439.358914 ↗
28. Ballistic Efficiency of an Individual Epoxy Composite Reinforced with Sisal Fibers in Multilayered Armor10.1590/1516-1439.346314 ↗
29. Giant Bamboo Fiber Reinforced Epoxy Composite in Multilayered Ballistic Armor10.1590/1516-1439.347514 ↗
30. Novel ballistic ramie fabric composite competing with Kevlar(tm) fabric in multilayered armor10.1016/j.matdes.2016.02.024 ↗
31. Meyers MA · 1994
32. In Vitro Assessment of New Niobium Phosphate Glasses and Glass Ceramics
33. Control of aluminum phosphate coating on mullite fibers by surface modification with polyethylenimine10.1016/j.ceramint.2017.09.161 ↗