journal article·2016-11-10Open access

Effect of Heating Method on Microstructure and Mechanical Properties of Zircon Reinforced Aluminum Composites

Hudsa Majidian, Ehsan Ghasali, Touradj Ebadzadeh, Mansour Razavi

Materials Research· Volume 19· Issue 6

Abstract

The mechanical properties and microstructure of aluminum matrix composites containing of zircon (10, 15 and 20 wt.%) as a reinforcement particles and cobalt additive (1, 1.5 and 2 wt.%) were investigated. The aluminum matrix composites were prepared by powder metallurgy technique and sintered in both conventional and microwave furnaces at temperatures higher than the melting point of aluminum. The results revealed that the density and mechanical strength of aluminum were increased by introducing zircon and cobalt particles. The maximum strength was obtained by adding 10 wt.% zircon sintered in microwave furnace at 950ºC. The phase analysis and scanning electron microscopy of sintered composites were examined and found some interesting data about intermetallic compounds.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microwave-Assisted Synthesis and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Energy Research Centre, Iran

References (32)

Show source-provided references
1. Effect of sintering temperature and heating mode on consolidation of Al-7Zn-2.5Mg-1Cu aluminum alloy10.1007/s12034-012-0369-4 ↗
2. Investigation on microstructural and mechanical properties of B4C-aluminum matrix composites prepared by microwave sintering10.1016/j.jmrt.2015.02.005 ↗
3. Investigation on microstructure and mechanical behavior of Al-ZrB2 composite prepared by microwave and spark plasma sintering10.1016/j.msea.2014.12.096 ↗
4. WC-Co Particles Reinforced Aluminum Matrix by Conventional and Microwave Sintering10.1590/1516-1439.027115 ↗
5. Mechanical and microstructure comparison between microwave and spark plasma sintering of Al-B4C composite10.1016/j.jallcom.2015.09.024 ↗
6. Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling10.1016/j.msea.2016.01.114 ↗
7. Puhan D · 2012
8. Microstructural characteristics of spray formed zircon sand reinforced LM13 composite10.1016/j.jallcom.2010.04.249 ↗
9. Metal matrix composites for space applications10.1007/s11837-001-0139-z ↗
10. Effect of particulate reinforcements on the mechanical properties of Al6061-WC and Al6061-Gr MMCs10.4236/jmmce.2011.1012087 ↗
11. Davis JR · 1999
12. Production of TiC reinforced-aluminum composites with the addition of elemental carbon10.1016/j.matlet.2005.06.032 ↗
13. Fabrication of in situ TiC reinforced aluminum matrix composites10.1023/A:1017946927566 ↗
14. Strengthening of aluminum by SiC, Al2O3 and MgO
15. Mechanical properties and microstructure characterization of spark plasma and conventional sintering of Al-SiC-TiC composites10.1016/j.jallcom.2016.01.118 ↗
16. Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method10.1016/j.matdes.2011.03.071 ↗
17. Study of Non-lubricated Wear of the Al-Si Alloy Composite Reinforced with Different Ratios of Coarse and Fine Size Zircon Sand Particles at Different Ambient Temperatures10.1007/s11249-014-0335-y ↗
18. Microstructure and Properties of Pressure Die Cast Aluminium/ Zirconium Silicate Composites10.2320/matertrans1989.36.565 ↗
19. Properties of Al6063 MMC reinforced with zircon sand and alumina10.9790/1684-0557277 ↗
20. Powder processing and properties of zircon-reinforced AI-13.5Si-2.5Mg alloy composites10.1007/s11665-997-0097-x ↗
21. Comparing the effect of processing temperature on microstructure and mechanical behavior of (ZrSiO4 or TiB2)/aluminum composites10.1016/j.msea.2008.07.009 ↗
22. Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering10.1016/j.jallcom.2016.07.063 ↗
23. Development of a new aluminium matrix composite reinforced with iron oxide (Fe3O4)
24. Microwave Sintering of SiCp/Al Composite10.4028/www.scientific.net/KEM.492.138 ↗
25. Spark plasma and microwave sintering of Al6061 and Al2124 alloys10.1007/s12613-013-0707-6 ↗
26. Effect of Zircon Silicate Reinforcements on the Microstructure and Properties of as Cast Al-4.5Cu Matrix Particulate Composites Synthesized via Squeeze Cast Route
27. Cast aluminum alloys containing dispersions of zircon particles10.1007/BF02661024 ↗
28. Effect of SiC additions on microstructure, mechanical properties and thermal shock behaviour of alumina-mullite-zirconia composites10.1016/j.msea.2011.10.027 ↗
29. Porous mullite-ZrO2 composites from reaction sintering of zircon and aluminum10.1016/j.ceramint.2004.12.001 ↗
30. Bsakey A · 2011 · 7
31. Campbell FC · 2010 · 239
32. Tjong SC · 2009 · 45