On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS
Source abstract
Abstract
Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation produce coatings with many defects, which in turn reduce the resistance to wear, especially under severe conditions. High Power Impulse Magnetron Sputtering is a novel physical vapor deposition technique that produces homogeneous coatings. In this study, CrN and CrAlN monolayer coatings were deposited on AISI 304 stainless steel substrates using HiPIMS. X-Ray Diffraction, Scanning Electron Microscopy, Atomic Force Microscopy were used to evaluate the microstructure, phase composition, morphology and chemical composition of the coating. Results showed that HiPIMS is a promising technique to deposit CrN and CrAlN homogeneous coatings with high hardness and good adhesion to the substrate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade de São Paulo, Brasil
MAHLE Metal Leve, Brasil
Universidade Estadual de Campinas, Brasil
References (18)
Show source-provided references
1. Tribological behaviour of hard coatings deposited by arc-evaporation PVD10.1016/S0042-207X(02)00248-8 ↗
2. Ionized physical vapor deposition (IPVD): A review of technology and applications10.1016/j.tsf.2006.03.033 ↗
3. Advances in Thin Film Technology through the Application of Modulated Pulse Power Sputtering10.4028/www.scientific.net/MSF.638-642.208 ↗
4. High power pulsed magnetron sputtered CrNx films10.1016/S0257-8972(02)00479-6 ↗
5. High power pulsed magnetron sputtering: A review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
6. Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion10.1063/1.2697052 ↗
7. Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings10.1016/j.surfcoat.2017.05.053 ↗
8. Anisotropic lattice expansion and shrinkage of hexagonal TiAlN and CrAlN films10.1016/S0257-8972(03)00040-9 ↗
9. Comparison of microstructure and mechanical properties of chromium nitride-based coatings deposited by high power impulse magnetron sputtering and by the combined steered cathodic arc/unbalanced magnetron technique10.1016/j.tsf.2003.11.113 ↗
10. Tribological Tests of Modern Coatings10.1016/S1452-3981(23)17391-3 ↗
11. Birkholz M · 2006
12. A study of AC reactive magnetron sputtering technique for the deposition of compositionally graded coating in the Cr-Al-N system10.1016/j.surfcoat.2006.08.079 ↗
13. Control of microstructure and properties of dc magnetron sputtering deposited chromium nitride films10.1016/j.vacuum.2007.08.009 ↗
14. Influence of sputtering parameters and nitrogen on the microstructure of chromium nitride thin films deposited on steel substrate by direct-current reactive magnetron sputtering10.1016/j.tsf.2010.05.095 ↗
15. Microstructure modifications of CrN coatings by pulsed bias sputtering10.1016/j.surfcoat.2012.05.043 ↗
16. Influence of substrate bias voltage on the microstructure and residual stress of CrN films deposited by medium frequency magnetron sputtering10.1016/j.mseb.2011.04.015 ↗
17. Structural, mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron sputtering10.1016/j.surfcoat.2005.08.072 ↗
18. Cavaleiro A · 2006