Glass Forming Ability and Mechanical Properties of Zr57.52Co21.24Al9.24Ag12 bulk metallic glass
Source abstract
Abstract
The effect of the partial substitution of Al for Ag in the glass forming ability (GFA) of the Zr57.52Co21.24Al21.24-xAgx (x = 8, 10, 12, and 14 at. %) family alloy are reported and discussed. Cylindrical and conical ingots were obtained using the suction casting technique. It was found that the Zr57.52Co21.24Al9.24Ag12 alloy showed a glassy structure, with a critical glassy diameter, Dc, of 2 mm and ∆Tx = 41 K. The bulk metallic glass Zr57.52Co21.24Al9.24Ag12 alloy was examined using scanning electron microscopy, differential thermal analysis and mechanical compression test. This alloy showed a Young´s modulus (E) of 76.4 GPa and yield strength (σy) of 1.58 GPa. The Glass Forming Ability of the Zr57.52Co21.24Al9.24Ag12 was explained in terms of the topological model of dense packed clusters and kinetic fragility index of the alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidad Michoacana de San Nicolás de Hidalgo, México
Universidad Nacional Autónoma de México, Mexico
References (17)
Show source-provided references
1. Suryanarayana C · 2012
2. Corrosion behavior and in vitro biocompatibility of Zr-Al-Co-Ag bulk metallic glasses An experimental case study10.1016/j.jnoncrysol.2012.04.022 ↗
3. Enhancement of glass-forming ability and bio-corrosion resistance of Zr-Co-Al bulk metallic glasses by the addition of Ag10.1016/j.jallcom.2010.02.078 ↗
4. High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates (Overview)10.2320/matertrans1989.36.866 ↗
5. Under what conditions can a glass be formed10.1080/00107516908204405 ↗
6. Heating and cooling rate dependence of the parameters representing the glass forming ability in bulk metallic glasses10.1016/j.jnoncrysol.2005.03.020 ↗
7. The influence of efficient atomic packing on the constitution of metallic glasses10.1080/1478643031000098828 ↗
8. The efficient cluster packing model - An atomic structural model for metallic glasses10.1016/j.actamat.2006.06.002 ↗
9. A structural model for metallic glasses10.1038/nmat1219 ↗
10. Formation of glasses from liquids and biopolymers10.1126/science.267.5206.1924 ↗
11. Nonexponential relaxations in strong and fragile glass formers10.1063/1.466117 ↗
12. Correlation between fragility and glass-forming ability/plasticity in metallic glass forming alloys10.1063/1.2759266 ↗
13. Composition, elastic property and packing efficiency predictions for bulk metallic glasses in binary, ternary and quaternary systems10.1590/1980-5373-MR-2015-0537 ↗
14. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
15. Figueroa IA · 2007 · 479
16. A step-by-step method of rule-of-mixture of fiber- and particle-reinforced composite materials10.1016/S0263-8223(98)00033-6 ↗
17. Ni- and Be-free Zr-based bulk metallic glasses with high glass-forming ability and unusual plasticity10.1016/j.jmbbm.2012.04.011 ↗