Characterization of a Gelcast AISI 310 SS Matrix Composite Reinforced by Alumina and GNP Particles
Source abstract
Abstract
Gelcasting is a versatile forming technique suitable for preparing composite materials with various powders, including metallic and ceramic particles, at any solids concentration. Despite its potential, the application of gelcasting to produce metal matrix composites reinforced with alumina and graphene remains limited. This study investigates the gelcasting of AISI 310 stainless steel composites reinforced with 1, 3, and 5 vol.% nanosized alumina and 0.5 vol.% graphene nanoplatelets (GNPs). Rheological behavior and particle interactions were analyzed to ensure uniform dispersion. Thermal analysis determined optimal sintering conditions, avoiding densification issues. Compression and microhardness tests revealed yield strengths of up to 285 MPa at room temperature (RT) and 140 MPa at 800 °C, exceeding ASTM A351/A351M-18e1 standards. Microstructural refinement and homogeneous alumina distribution were achieved, with 3 vol.% alumina providing the best performance. The gelcasting process proved effective for producing dense, mechanically robust composites at a low cost.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Comissão Nacional de Energia Nuclear, Brasil
Universidade do Vale do Paraíba, Brasil
Centro Universitário da FEI, Brasil
Funding
IPEN · FEI · UNIVAP · BRATS · CNPq
References (43)
Show source-provided references
1. Samal PK · 2015 · 7
2. Levy No F · 2016
3. Fabrication of in situ Al2O3 reinforced nanostructure 304 stainless steel matrix composite by self-propagating high temperature synthesis process10.1016/j.matdes.2015.06.138 ↗
4. Spray-formed stainless steel matrix composites with co-injected carbide particles10.1007/s11661-011-0633-z ↗
5. Fabrication and characterization of microstructure of stainless steel matrix composites containing up to 25vol.%NbC10.1016/j.matchar.2016.07.019 ↗
6. Janney MA · 1996
7. Development of low-toxicity gelcasting systems10.1111/j.1151-2916.1998.tb02377.x ↗
8. Oliveira LFR · 2024
9. Oliveira LFR · 2015
10. AISI 310 stainless steel formed by gelcasting: an alternative manufacture method10.4028/www.scientific.net/MSF.1012.325 ↗
11. Basak AK · 2015 · 349
12. Aqueous colloidal processing of submicrometric SiC plus Y3Al5O12 with diamond nanoparticles10.1016/j.jeurceramsoc.2013.04.016 ↗
13. FGM stainless steel-Ti(C,N) cermets through colloidal processing10.1016/j.ijrmhm.2014.05.008 ↗
14. He F · 2013 · 185
15. Fabrication and properties of dense silicon carbide ceramic via gel-casting and gas silicone infiltration10.1016/j.ceramint.2016.08.194 ↗
16. On the impact toughness of Al-15vol.%B4C metal matrix composites10.1016/j.compositesb.2015.04.018 ↗
17. 2019
18. Additive manufacturing of graphene reinforced 316L stainless steel composites with tailored microstructure and mechanical properties
19. Enhancement of the mechanical properties of graphene nanoplatelet (GNP) reinforced nickel matrix nanocomposites10.1016/j.msea.2021.141324 ↗
20. Strengthening mechanisms of graphene- and Al2O3-reinforced aluminum nanocomposites synthesized by room temperature milling10.1016/j.matdes.2015.12.007 ↗
21. Drying of gelcast ceramic parts via the liquid desiccant method10.1016/S0955-2219(03)00045-1 ↗
22. Osmotic drying of gelcast bodies in liquid desiccant10.1016/j.jeurceramsoc.2011.02.015 ↗
23. Sintering study of 316L stainless steel metal injection molding parts using Taguchi method: final density10.1016/S0921-5093(01)00942-X ↗
24. 2018
25. 2018
26. 2017
27. 2019
28. High-temperature mechanical – and fatigue properties of cast alloys intended for use in exhaust manifolds10.1016/j.msea.2014.08.014 ↗
29. 2021
30. Fatigue limit prediction of the matrix of 17-4PH stainless steel based on small crack mechanics
31. Mechanical properties of stainless steel composites with titanium carbonitride consolidated by spark plasma sintering10.1177/0021998315574756 ↗
32. Formation of stainless steel-carbon nanotube composites using a scale chemical vapor infiltration process10.1007/s10853-012-6885-1 ↗
33. Corrosion fatigue of austenitic cast iron Ni-Resist D5S and austenitic cast steel HK30 in argon and synthetic diesel exhaust at 800 °C10.1016/j.ijfatigue.2019.105396 ↗
34. Dowling NE · 2019
35. Selective laser melting of stainless steel and alumina composite: experimental and simulation studies on processing parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.050 ↗
36. Effect of reinforcing graphene nanoplatelets (GNP) on the strength of aluminium (Al) metal matrix nanocomposites10.1016/j.matpr.2021.09.227 ↗
37. Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method10.1016/j.pnsc.2014.03.012 ↗
38. Sigma phase-induced failure of AISI 310 stainless steel radiant tubes10.1016/j.engfailanal.2017.08.027 ↗
39. Microstructural analysis of phase precipitation during high temperature creep in AISI 310 stainless steel10.1016/j.jmrt.2023.02.175 ↗
40. Investigation of adhesion and tribological behavior of borided AISI 310 stainless steel
41. Influence of machining parameters on surface roughness and susceptibility to hydrogen embrittlement of austenitic stainless steels10.1016/j.ijhydene.2019.09.139 ↗
42. Study on hot workability and optimization of process parameters of a modified 310 austenitic stainless steel using processing maps10.1016/j.matdes.2014.11.041 ↗
43. Gelcasting of stainless steel powder: an alternative to injection molding10.4028/www.scientific.net/MSF.660-661.194 ↗