Nitriding of AISI 1020 steel: comparison between conventional nitriding and nitriding with cathodic cage
Source abstract
Abstract
Cylindrical samples of AISI 1020 steel were nitrided, using the techniques of conventional plasma nitriding and cathodic cage. In the latter, the samples are kept at floating potential, inside of a cage that works as a cathode and to shield the samples from the cathodic potential. A systematic study was conducted in order to evaluate the efficiency of this technique in the elimination of edge effect, in comparison with conventional plasma nitriding. In addition, another comparative study of the phases obtained using the conventional plasma nitriding and nitriding with cathodic cage was performed. Two metallic cages were used, one made of austenitic stainless AISI 316 and other one made of AISI 1020 steel, to prove the effect of deposition in nitriding with cathodic cage. The samples which were nitrided by this new technique had shown nitriding rates, crystalline phases, and microhardness, similar to those samples which were nitrided conventionally. However, it was possible to confirm the elimination of edge effect through the characterization by optical microscopy and by microhardness test along the samples surfaces. The samples were characterized by optical microscopy, microhardness tests and X-ray diffraction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Federal Institute of Education, Science and Technology of Piaui - IFPI, Brazil
Federal University of Rio Grande do Norte - UFRN, Brazil
References (9)
Show source-provided references
1. Alves C Jr · 2001
2. Active screen plasma nitriding of austenitic stainless steel10.1179/026708402225006240 ↗
3. Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel10.1016/j.corsci.2003.09.015 ↗
4. Effect of workpiece geometry on the uniformity of nitrided layers10.1016/S0257-8972(00)01146-4 ↗
5. Use of cathodic cage in plasma nitriding10.1016/j.surfcoat.2006.04.014 ↗
6. Principles, mechanisms and aplications of active screen plasma nitriding
7. The influence of the sputtering process on the constitution of the compound layers obtained by plasma nitriding10.1016/S0257-8972(03)00589-9 ↗
8. Sousa RS · 2005
9. Lima JA · 2003