journal article·2020Open access

Austenitizing Temperature and Cooling Rate Effects on the Martensitic Transformation in a Microalloyed-Steel

Samuel da Silva de Souza, Paulo Sérgio Moreira, Geraldo Lúcio de Faria

Materials Research· Volume 23· Issue 1

Abstract

The effects of the austenitizing temperature and the cooling rate upon the kinetic of athermal martensitic transformation in a microalloyed steel were evaluated. Considering the studied steel, the knowledge about these effects on the martensitic transformation has a great relevance for naval manufacturers and steel researchers. In this study, computational simulation was performed aiming to evaluate the phase’s stability. Specimens were submitted to quenching simulations in a dilatometer, considering four different austenitizing temperatures and four cooling rates. The results shown that the austenite chemical composition was not significantly affected by the austenitizing temperatures. Both the austenitic grain size and the cooling rate affected the martensitic transformation kinetics. The larger the austenitic grain size, the higher the Ms. The austenitic grain growth promoted a decrease in the required chemical energy to compensate the free energy increase associated with the lattice strain and the creation of new interfaces, leading to a lower austenite undercooling. An extrinsic effect of the cooling rate on the Ms was observed. For lower cooling rates, the carbide precipitation modified que austenite chemical composition, changing its stability and increasing Ms. A predictability equation, correlating the MS with the austenite grain size and the steel cooling rate, was proposed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Ouro Preto, Brasil

References (25)

Show source-provided references
1. Bhadeshia HK · 2006
2. Martensite transformation kinetics in 9Cr-1.7W-0.4Mo-Co ferrite steel10.1016/j.jallcom.2014.05.060 ↗
3. Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis10.1179/1743284714Y.0000000532 ↗
4. Estimation of cooling rate in the welding of plates with intermediate thickness
5. Kozeschnik E · 2001 · 5 · 349
6. Motycka P · 2012
7. 2015
8. On the effect of fine grain size on the Ms temperature in Fe-27Ni-0,025C alloys10.1007/BF02645565 ↗
9. Kinetics of the martensite transformation in athermal Fe-C-Ni-Cr alloys
10. Krauss G · 2005
11. The effect of titanium and reheating temperature on the microstruture and strength of plain carbon, vanadium and niobium microalloyed steels10.1007/BF00544206 ↗
12. Kinetics of martensitic transformation in partially bainitic 300M steel10.1016/0921-5093(90)90273-6 ↗
13. Nishiyama Z · 1978
14. The influence of austenite strength upon the austenite-martensite transformation in alloy steels10.1007/BF02641994 ↗
15. Austenite grain size and the martensite start temperature10.1016/j.scriptamat.2008.11.043 ↗
16. Continuous cooling transformations in martensitic stainless steels10.2355/isijinternational.34.516 ↗
17. Optimization of the properties obtained by quenching in martensitic stainless steels X-30-40Cr13 and X40-60CrMoV1410.1007/BF01191962 ↗
18. Continuous cooling transformation kinetics versus isothermal transformation kinetics of steels: a phenomenological rationalization of experimental observations10.1016/0927-796X(95)00183-2 ↗
19. Phase transformations in AISI 410 stainless steel10.1016/S0921-5093(01)01710-5 ↗
20. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network10.2355/isijinternational.39.1038 ↗
21. Martensite formation in partially and fully austenitic plain carbon steels10.1007/s11661-009-9796-2 ↗
22. Effect of the high-temperature deformation on the Ms temperature in a low C martensitic stainless steel10.1007/s11665-012-0258-4 ↗
23. Martensite transformation in the modified high Cr ferritic heat-resistant steel during continuous cooling10.1557/jmr.2012.308 ↗
24. Effect of the Ms temperature on residual stress in welded joints of high-strength steels10.1007/BF03263490 ↗
25. A new empirical formula for the calculation of Ms temperatures in pure iron and super-low carbon alloy steels10.1016/S0924-0136(01)00625-2 ↗