journal article·2011-05-06Open access

Effect of different finishing: polishing systems on the surface roughness of two heat-treated composite resins

Gabrielle Ribeiro Lima, Nathalia Cardoso Baima Maluf, Soraia de Fátima Carvalho Souza, Antonio Ernandes Macedo Paiva, Erick Miranda Souza, Ivone Lima Santana

Materials Research· Volume 14· Issue 2

Abstract

The aim of this study was to compare the surface roughness achieved by different finishing/polishing systems on two composite resins for direct use after thermic treatment. The specimens (n = 40 per group (G); G1 = Filtek™ P60; G2 = Fill Magic®) were set up on a matrix of stainless steel with circular internal niches (Ø = 10.0 mm; h = 2.0 mm). Next, they were subjected to thermal treatment in a heated chamber at 170 °C for 10 minutes. They were then divided randomly into four subgroups (Sg) to receive the surface treatment according to the finishing/polishing systems tested (n = 10): Sg A: Control; Sg B: Diamond® felt disc + Diamond Excel® diamond paste; Sg C: Sof-Lex® discs; and Sg D: Enhance™ silicon tips. The mean roughness (Ra) was determined using a digital surface roughnes tester. Data was analyzed by two-way ANOVA and Tukey's post-hoc test (α = 0.05). Differences between the surface treatments were found on both resins (p < 0.05). In G1, the lowest mean Ra values were observed using Sg C (0.07 μm) and the highest for Sg D (0.12 μm) (p < 0.05). There was no difference between Sg B (0.08 μm) and Sg C (0.07 μm) (p = 0.076). In G2, there was a progressive increase in mean Ra values from Sg D (0.05 μm) to Sg C (0.06 μm) and to Sg B (0.07 μm) (p < 0.05). It was concluded that the finishing/polishing systems modified Ra on both resins.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Federal University of Maranhão, Brazil

Maranhão Federal Center for Technological Education, Brazil

Maranhão University Center, Brazil

References (24)

Show source-provided references
1. Longevity of restorations in posterior teeth and reasons for failure
2. Surface roughness of various packable composites
3. Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins10.1016/S0109-5641(02)00014-3 ↗
4. Effect of prophylactic polishing protocols on the surface roughness of esthetic restorative materials
5. The influence of surface roughness and surface-free energy on supra and subgingival plaque formation in man10.1111/j.1600-051X.1995.tb01765.x ↗
6. Effect of finishing and polishing producers on the surface roughness of packable composites
7. Surface finish produced on resin composites by new polishing systems
8. Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems
9. Santana IL · Brazilian Dental Journal · 20 · 2009
10. Benefits and disadvantages of tooth-caloured alternatives to amalgam10.1016/S0300-5712(96)00066-8 ↗
11. Second generation laboratory composite resins for indirect restorations10.1111/j.1708-8240.1997.tb00928.x ↗
12. Effect of temperature and duration of post-cure on selected mechanical properties of resin composites containing carboxylic anhydrides
13. Types of resin-based inlay materials and their properties
14. Heat treatment of a direct composite resin: influence on flexural strength10.1590/S1806-83242009000300004 ↗
15. Effects of secondary curing on indirect posterior composite resins
16. The clinical evaluation of heat-treated composite resin inlays10.14219/jada.archive.1990.0038 ↗
17. Polishing occlusal surfaces of direct class II composite retorations in vivo
18. Effect of polishing systems on the surface roughness of microhybrid composites10.1111/j.1708-8240.2003.tb00300.x ↗
19. Contouring, finishing, and polishing class V restorative materials
20. Effects of finishing and polishing procedures on the surface texture of resin composites10.1016/0109-5641(94)90041-8 ↗
21. Surface roughness of composites and hybrid ionomers
22. Effect of different polishing systems on the surface roughness of microhybrid composites10.1590/S1678-77572009000100005 ↗
23. Surface roughness of enamel and four resins composites
24. Ferracane JL · 1995 · 133