Hydrolytic degradation of a resin composite as a function of the curing tip distance and aging
Source abstract
Abstract
The influence of curing tip distance and storage time on the hardness of a composite was evaluated. Composite samples (Filtek Z250) were polymerized at different distances (5, 10, and 15 mm), compared with a control group (0 mm), and stored in distilled water at 37 ° C for 24 hours. The Knoop-hardness of top and bottom surfaces was assessed (25 g/30 s). Specimens were stored in distilled water for 6 and 12 months and were retested. Hardness was found to be negatively influenced by both curing tip distance and storage time. Despite similar values at 24 hours, differences in hardness values compared with the control group appeared over time. In comparing both surfaces, hardness proved to be greater at the top surface for all groups. Composites with similar initial hardness values can degrade very differently after water storage. The higher the photoactivation distance and storage time, the worse the mechanical property.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Building materials and conservation · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of São Paulo, Brazil
Anhanguera-Uniban University, Brazil
References (45)
Show source-provided references
1. The effect of distance from light source on light intensity from curing lights
2. Influence of light-curing sources on polymerization reaction kinetics of a restorative system
3. Energy dependent polymerization of resin-based composite10.1016/S0109-5641(01)00069-0 ↗
4. Effect of light power density variations on bulk curing properties of dental composites10.1016/S0300-5712(03)00015-0 ↗
5. Influence of bisgma, tegdma, and bisema contents on viscosity, conversion, and flexural strength of experimental resins and composites10.1111/j.1600-0722.2009.00636.x ↗
6. Effect of exposure intensity and post-cure temperature storage on hardness of contemporary photo-activated composites10.1016/S0300-5712(01)00045-8 ↗
7. Contemporary issues in photocuring
8. Wear and marginal breakdown of composites with various degrees of cure10.1177/00220345970760081401 ↗
9. Shear bond strength with increasing light-guide distance from dentin10.2310/6130.2006.00007 ↗
10. Bracket bond strength dependence on light power density10.1016/j.jdent.2005.11.006 ↗
11. The influence of light-curing time on the bacterial colonization of resin composite surfaces10.1016/j.dental.2009.02.012 ↗
12. Cytotoxicity of composite materials polymerized with led curing units10.2341/07-16 ↗
13. Class ii composite resin restorations with two polymerization techniques: Relationship between microtensile bond strength and marginal leakage10.1016/j.jdent.2005.01.001 ↗
14. Microleakage of class ii packable resin composites lined with flowables: An in vitro study
15. Water sorption and solubility of resin-based materials following inadequate polymerization by a visible-light curing system10.1111/j.1365-2842.1989.tb01317.x ↗
16. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
17. Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin10.1111/j.1365-2842.2004.01172.x ↗
18. Irradiance of visible light-curing units and voltage variation effects10.14219/jada.archive.1987.0252 ↗
19. Degradation, fatigue, and failure of resin dental composite materials10.1177/154405910808700802 ↗
20. Synthesis and evaluation of modified urethane dimethacrylate resins with reduced water sorption and solubility10.1016/j.dental.2008.07.009 ↗
21. Structure property relationship among novel dental composite matrix resins
22. Influence of different indentation load and dwell time on knoop microhardness tests for composite materials10.1016/S0142-9418(03)00104-1 ↗
23. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins10.1016/S0109-5641(85)80058-0 ↗
24. Influence of selected components on crosslink density in polymer structures10.1034/j.1600-0722.2001.00057.x ↗
25. Elution of tegdma and bisgma from a resin and a resin composite cured with halogen or plasma light10.1034/j.1600-0722.2000.108004341.x ↗
26. Degree of conversion and knoop hardness of z250 composite using different photo-activation methods10.1016/j.polymertesting.2005.07.011 ↗
27. Influence of curing modes on crosslink density in polymer structures10.1016/j.jdent.2004.01.012 ↗
28. Influence of pulse-delay curing on softening of polymer structures10.1177/00220345010800061801 ↗
29. Post-irradiation polymerization of different anterior and posterior visible light-activated resin composites10.1016/0109-5641(92)90104-K ↗
30. Determination of polymerization shrinkage kinetics in visible-light-cured materials: Methods development10.1016/S0109-5641(05)80030-2 ↗
31. Conversion-dependent shrinkage stress and strain in dental resins and composites10.1016/j.dental.2004.10.006 ↗
32. Light intensity effects on resin-composite degree of conversion and shrinkage strain10.1016/S0109-5641(00)00020-8 ↗
33. Polymer structure of a light-cured resin composite in relation to distance from the surface10.1034/j.1600-0722.2003.00044.x ↗
34. Water sorption characteristics of light-cured dental resins and composites based on bis-ema/pcdma10.1016/S0142-9612(03)00529-5 ↗
35. Elution of leachable components from composites10.1111/j.1365-2842.1994.tb01158.x ↗
36. Effect of human saliva on surface degradation of composite resins
37. Sorption and solubility of resin-based restorative dental materials10.1016/S0300-5712(02)00083-0 ↗
38. Water absorption characteristics of dental microfine composite filling materials: I. Proprietary materials10.1016/0142-9612(84)90038-3 ↗
39. Water sorption of polymethacrylate networks: Bis-gma/tegdm copolymers10.1002/jbm.820210306 ↗
40. Hydrolytic stability of silanated zirconia-silica-urethane dimethacrylate composites10.1111/j.1365-2842.1995.tb01566.x ↗
41. Synthesis and evaluation of new oxaspiro monomers for double ring-opening polymerization10.1177/00220345920710070901 ↗
42. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins10.1016/S0142-9612(02)00380-0 ↗
43. Resin composites in dentistry: The monomer systems10.1111/j.1600-0722.1997.tb00188.x ↗
44. Influence of silanization and filler fraction on aged dental composites10.1046/j.1365-2842.2000.00573.x ↗
45. Influence of curing tip distance on resin composite knoop hardness number, using three different light curing units