Influence of Moisture on the Properties of AlSi10Mg Powder for Laser Powder Bed Fusion
Source abstract
Abstract
This study explores the behavior of aluminum powder in laser powder bed fusion (LPBF) for additive manufacturing. Focusing on AlSi10Mg powders, the research investigates the effects of environmental conditions, such as temperature and humidity, on crucial properties like moisture content, fluidity, density, and agglomeration. Comprehensive tests, including particle size analysis and fluidity assessments, were conducted. Results showed increased flow time in the Carney funnel fluidity test after storage, but flow properties were maintained under high-temperature, low-humidity conditions. High humidity led to recurrent agglomerate formation. Moisture content analysis aligned with literature findings. Conclusively, these tests provide a reference for material acceptance and aid in supplier comparison for improved machine fluidity. While temperature and humidity impact aluminum oxide formation, humidity's greater relevance affects powder fluidity and quality. Other factors mentioned may cause permanent damage to the aluminum powder.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade de São Paulo, Brasil
Universidade Federal de São Carlos, Brasil; Universidade Federal de São Carlos, Brasil
Fundação de Apoio ao Instituto de Pesquisa Tecnológicas, Brasil
Universidade Federal de São Carlos, Brasil
Silesian University of Technology, Poland
Universidade de São Paulo, Brasil; Silesian University of Technology, Poland
References (24)
Show source-provided references
1. Powder bed fusion – metals
2. Powder bed fusion of multimaterials
3. Comprehensive approach to powder feedstock characterization for powder bed fusion additive manufacturing: a case study on AlSi7Mg. MDPI10.3390/ma11122386 ↗
4. Effect of particle size distribution on the packing of powder beds: a critical discussion relevant to additive manufacturing
5. Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy
6. Review of selective laser melting: materials and applications
7. A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: microstructure and properties
8. Flowability characterization and enhancement of aluminum powders for additive manufacturing
9. 2019
10. Exploration of the effects of metallic powder handling and storage conditions on flowability and moisture content for additive manufacturing applications10.3390/met12040603 ↗
11. A review on the simulation of selective laser melting AlSi10Mg10.1016/j.optlastec.2023.110500 ↗
12. Thermodynamic analysis of AlSi10Mg alloy
13. Measuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion
14. 2020
15. 2022
16. 2022
17. 2016
18. 2016
19. Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)10.1016/j.procir.2022.08.102 ↗
20. How to predict premature multiphase steel cracks during edge flangeability10.3390/eng3040034 ↗
21. Enhancing aluminum corrosion in water10.1007/s10800-009-9862-x ↗
22. Influence of storage conditions and reconditioning of AlSi10Mg powder on the quality of parts produced by laser powder bed fusion (LPBF)10.1016/j.addma.2021.101896 ↗
23. Influence of aluminum powder aging on Directed Energy deposition10.1016/j.matdes.2022.110677 ↗
24. Granular flow down an inclined plane: bagnold scaling and rheology