Influence of NbC Content on the Wear Resistance of Alumina/Niobium Carbide Tools
Source abstract
Abstract
Wear resistance is a fundamental property which defines the lifetime of cutting tools, but the investigation of wear performance of alternative hard materials for traditional WC-Co composites are recent. The present work evaluated the pin-on-disk wear behavior and mechanical properties, i.e., hardness and fracture toughness of spark plasma sintered Al2O3 matrix composites with additions of 5, 15, 25 or 30%wt of niobium carbide NbC. The wear resistance was observed to increase as a function of the NbC content, even though the hardness reached a plateau at 25%wt NbC. The composite behavior was compared to that of other alumina composite tool materials proving to be a promising material for applications such as ceramic cutting tools. The composition A95N5 presented the best combination of values of wear rate: 8.9 mm3/N.m, hardness equal to (17.36±1.72) GPa and fracture toughness of (3.2±0.6) MPa. m1/2.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade de São Paulo, Brasil
KU Leuven, Belgium
References (30)
Show source-provided references
1. 2020
2. Friction and wear behaviors of Al2O3/TiC micro-nano-composite ceramic sliding against metals and hard materials10.1016/j.ceramint.2015.10.001 ↗
3. Microstructure and mechanical properties of 90WC-8Ni-2Mo2C cemented carbide developed by conventional powder metallurgy10.1016/j.ijrmhm.2017.06.009 ↗
4. The use of niobium carbide (NbC) as cutting tools and for wear resistant tribosystems10.1016/j.ijrmhm.2014.07.002 ↗
5. Friction and wear behaviors of Al2O3/TiC micro-nano-composite ceramic sliding against metals and hard materials10.1016/j.ceramint.2015.10.001 ↗
6. Effect of the additive VC on tribological properties of WC- Al2O3 composites10.1016/j.ijrmhm.2018.04.005 ↗
7. NbC as grain growth inhibitor and carbide in WC-Co hardmetals10.1016/j.ijrmhm.2007.09.003 ↗
8. Uehara JLHS · 2015
9. Properties of sintered alumina reinforced with niobium carbide10.1016/j.ijrmhm.2008.05.004 ↗
10. Pierson H · 1996
11. Dry sliding friction and wear behaviour of TiC-based ceramics and consequent effect of the evolution of grain buckling on wear mechanism
12. Tribological aspect in technological assurance of ceramic component quality10.1007/s11148-019-00353-7 ↗
13. Effect of humidity on friction and wear: a critical review10.3390/lubricants6030074 ↗
14. Effects of surrounding atmosphere on the wear of sintered alumina10.1016/0043-1648(91)90233-K ↗
15. 2015
16. A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct Crack Measurements10.1111/j.1151-2916.1981.tb10320.x ↗
17. 2017
18. Ferreira V · 2001
19. Alecrim LRR · 2016 · 2124
20. Sliding wear behavior of Al2O3-NbC composites obtained by conventional and nonconventional techniques10.1016/j.triboint.2017.02.028 ↗
21. Hardness to toughness relationship of fine-grained WC-Co hardmetals10.1016/S0263-4368(98)00028-6 ↗
22. Effects of material microstructure and surface microscopic geometry on the performance of ceramic cutting tools in intermittent turning10.1016/j.ceramint.2018.01.269 ↗
23. Quasi-static solid particle damage in brittle solids, I. Observations, analysis and implications10.1016/0001-6160(76)90042-0 ↗
24. Hutchings IM · 1992
25. Wear mechanisms in brittle solids10.1016/0956-7151(92)90455-N ↗
26. ZrO2-toughened Al2O3 composites with better fracture and wear resistance properties10.1177/0885328217750820 ↗
27. A review of tribological properties for boron carbide ceramics10.1016/j.pmatsci.2020.100718 ↗
28. Tribological behavior of TiB2-TiC-Al2O3 composite coating synthesized by combined SHS and laser technology10.1016/j.surfcoat.2010.01.027 ↗
29. Comparison of the wear behaviors of advanced and conventional cemented tungsten carbides10.1016/j.ijrmhm.2018.10.019 ↗
30. Unlubricated friction and wear behaviors of various alumina-based ceramic composites against cemented carbide10.1016/j.ceramint.2005.03.031 ↗