journal article·2021Open access

Investigation and Nanomechanical Behavior of the Microconstituents of Al-Si-Cu alloy After Solution and Ageing Heat Treatments

Silvano Leal dos Santos, Felipe Ribeiro Toloczko, Abrão Chiaranda Merij, Newton Haruo Saito, Davinson Mariano da Silva

Materials Research· Volume 24· Issue 2

Abstract

The effects of heat treatment on the microstructural evolution and mechanical behavior of Al-Si-Cu alloy were investigated. Solution heat treatment was performed at 500oC/6h and 540oC/6h, followed by quenching in warm water at 60ºC. Lastly, artificial ageing treatment was performed at 160ºC/6h, 190ºC/4h and 210ºC/2h. The microstructural evolution of the samples before and after heat treatments was analyzed by optical microscopy, scanning electronic microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). Analyses revealed the presence Al5FeSi, Al15(FeMn)3Si2, Al2Cu and Si particles. The morphologies of the present phases were dependent on the heat treatment. Solution treatment at 540ºC/6h resulted in significant softening of the alloy compared with the treated samples at 500ºC/6h. Vickers hardness analysis indicated that the hardness peak of the alloy after heat treatment was about 125 HV. Mechanical properties of different phases have been investigated by nanoindentation technique, which indicated that the highest hardness and modulus of elasticity were found for the Si particle, especially those distributed in the microstructures of the samples submitted to higher solution and ageing temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do ABC, Brasil; Faculdade de Tecnologia de São Paulo, Brasil

Faculdade de Tecnologia de São Paulo, Brasil

References (52)

Show source-provided references
1. Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al–9wt%Si casting alloy10.1016/j.matchemphys.2007.06.011 ↗
2. Response of A356 to warm rotary forming and subsequent T6 heat treatment10.1016/j.msea.2014.05.088 ↗
3. Effect of Sc addition and T6 aging treatment on the microstructure modification and mechanical properties of A356 alloy10.1016/j.msea.2016.08.022 ↗
4. Microstructure and mechanical properties of AlSi10Cu3 alloy with (La+Yb) addition processed by heat treatment10.1016/S1002-0721(16)60118-7 ↗
5. The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys10.1016/j.msea.2007.12.026 ↗
6. Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys10.1016/j.matdes.2010.10.023 ↗
7. Microstructure evolution of eutectic Si in Al-7Sibinary alloy by heat treatment and its effect on enhancing thermal conductivity10.1016/j.jmrt.2020.06.021 ↗
8. Effect of spheroidization of eutectic Si on mechanical properties of eutectic Al–Si alloys10.1557/jmr.2018.144 ↗
9. Role of modification and melt thermal treatment processes on the microstructure and tensile properties of Al–Si alloys10.1016/j.matdes.2015.05.013 ↗
10. Experimental investigation of the 600 and 800 °C sections of the Fe-Mn-Sb system10.1016/j.jallcom.2018.06.186 ↗
11. Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy10.1016/S1003-6326(16)64191-2 ↗
12. Effect of interrupted ageing treatment on themechanical properties and intergranular corrosion behavior of Al-Mg-Si alloys10.1016/j.jmrt.2019.10.050 ↗
13. Iron-rich intermetallics in high pressure die cast A383 aluminum alloys
14. Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities10.1016/j.triboint.2020.106236 ↗
15. Unsteady‑State horizontal solidification of an Al–Si–Cu–Fe alloy: Relationship between thermal parameters and microstructure with mechanical properties/fracture feature10.1007/s12540-018-0174-8 ↗
16. Influence of process-induced microstructure on hardness of two Al–Si alloys10.1016/j.msea.2015.08.051 ↗
17. Mechanical properties of intermetallic phases in multi-component Al–Si alloys using nanoindentation
18. Influence of injection temperature and pressure on the microstructure, mechanical and corrosion properties of a AlSiCu alloy processed by HPDC10.1016/j.matdes.2015.09.095 ↗
19. Effects of microstructure and casting defects on the fatigue behavior of the high-pressure die-cast AlSi9Cu3(Fe) alloy10.1016/j.prostr.2017.11.119 ↗
20. Cluster-assisted nucleation of silicon phase in hypoeutectic Al–Si alloy with further inoculation10.1016/j.actamat.2014.01.061 ↗
21. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
22. Improvement of the tensile properties of an Al–Si–Cu–Mg aluminum industrial alloy by using multi stage solution heat treatments10.1016/j.msea.2012.10.064 ↗
23. Investigation on microstructural and microhardness evolution in as-cast and T6/heat-treated samples of a horizontally solidified AlSiCu alloy10.1016/j.jmrt.2019.06.054 ↗
24. Precipitation of primary Fe-rich compounds in secondary AlSi9Cu3(Fe) alloys10.1007/s10973-015-4952-y ↗
25. Process
26. Effect of solution treatment parameters on tensile properties of cast aluminum alloys10.1007/BF02833067 ↗
27. The effects of mischmetal, cooling rate and heat treatment on the hardness of A319.1, A356.2 and A413.1 Al–Si casting alloys10.1016/j.msea.2007.09.011 ↗
28. Effects of solution treatment on microstructures and micro-hardness of a Sr-modified Al-Si-Mg alloy10.1016/j.msea.2018.04.049 ↗
29. Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al–Si–Cu alloy10.1016/j.jallcom.2016.05.099 ↗
30. The effects of mischmetal, cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1, A356.2 and A413.1 Al–Si casting alloys10.1016/j.msea.2007.07.039 ↗
31. Effects of solution treatment on microstructures and micro-hardness of a Sr-modified Al-Si-Mg alloy10.1016/j.msea.2018.04.049 ↗
32. Effect of Mg and Cu on microstructure, hardness and wear on functionally graded Ale19Si alloy prepared by centrifugal casting10.1016/j.jmrt.2020.11.050 ↗
33. Effect of solidification rate on the coarsening behavior of precipitate in rapidly solidified Al-Si alloy10.1016/j.pnsc.2016.08.002 ↗
34. Effect of spheroidization of eutectic Si on mechanical properties of eutectic Al–Si alloys10.1557/jmr.2018.144 ↗
35. Effect of heat treatment on microstructure and tensile properties of A356 alloys
36. New short T6 heat treatments for aluminium silicon alloys obtained by semisolid forming10.1016/j.msea.2014.10.078 ↗
37. Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys10.1023/A:1027333602276 ↗
38. Optimizing the tensile properties of Al–Si–Cu–Mg 319-type alloys: role of solution heat treatment10.1016/j.matdes.2014.01.060 ↗
39. Improvement of the tensile properties of an Al–Si–Cu–Mg aluminum industrial alloy by using multi stage solution heat treatments10.1016/j.msea.2012.10.064 ↗
40. Influence of Mg and solution heat treatment on the occurrence of incipient melting in Al–Si–Cu–Mg cast alloys10.1016/j.msea.2012.02.032 ↗
41. Influence of process-induced microstructure on hardness of two Al–Si alloys10.1016/j.msea.2015.08.051 ↗
42. Precipitation dependence of thermal properties for Al–Si–Mg–Cu–(Ti) alloy with various heat treatment10.1016/j.jallcom.2015.05.201 ↗
43. Influence of aging treatments and alloying additives on the hardness of Al–11Si–2.5Cu–Mg alloys10.1016/j.matdes.2010.03.026 ↗
44. Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys10.1023/A:1027333602276 ↗
45. Thermal characteristics of heat-treated aluminum high-pressure die-castings10.1016/j.scriptamat.2008.01.031 ↗
46. Investigation of mechanical properties of intermetallic phases in multi-component Al–Si alloys using hot-stage nanoindentation10.1016/j.intermet.2009.09.013 ↗
47. A high temperature nanoindentation study of Al–Cu wrought alloy10.1016/j.msea.2015.07.066 ↗
48. Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys10.1016/j.matdes.2010.10.023 ↗
49. The heat treatment of Al–Si–Cu–Mg casting alloys10.1016/j.jmatprotec.2010.03.020 ↗
50. Tailoring of Processing Parameters, Dendritic Microstructure, Si/ Intermetallic Particles and Microhardness in As‑cast and Heat‑Treated Samples of Al7Si0.3Mg Alloy10.1007/s12540-019-00334-y ↗
51. Role of sliding-induced tribofilms on fracture of particles in aluminium–silicon alloys10.1016/j.wear.2013.01.081 ↗
52. Indentation-induced subsurface damage in silicon particles of Al–Si alloys10.1016/j.msea.2009.08.052 ↗