journal article·2011-08-12Open access

The effects of ZnO2 nanoparticles on properties of concrete using ground granulated blast furnace Slag as binder

Ali Nazari, Shadi Riahi

Materials Research· Volume 14· Issue 3

Abstract

In the present study, flexural strength together with pore structure, thermal behavior and microstructure of concrete containing ground granulated blast furnace slag with different amount of ZnO 2 nanoparticles has been investigated. Portland cement was replaced by different amounts of ground granulated blast furnace slag and the properties of concrete specimens were investigated. Although it negatively impact the properties of concrete, ground granulated blast furnace slag was found to improve the physical and mechanical properties of concrete up to 45 wt. (%). ZnO 2 nanoparticles with the average particle size of 15 nm were added partially to concrete with the optimum content of 45 wt. (%) of ground granulated blast furnace slag and physical and mechanical properties of the specimens was measured. ZnO 2 nanoparticle as a partial replacement of cement up to 3 wt. (%) could accelerate C-S-H gel formation as a result of increased crystalline Ca(OH) 2 amount at the early age of hydration and hence increase flexural strength of concrete. The increased the ZnO 2 nanoparticles' content more than 3 wt. (%), causes the reduced the flexural strength because of the decreased crystalline Ca(OH) 2 content required for C-S-H gel formation together with unsuitable dispersion of nanoparticles in the concrete matrix. ZnO 2 nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Islamic Azad University, Iran

References (63)

Show source-provided references
1. High performance cementing materials from industrial slags: a review10.1016/S0921-3449(99)00060-9 ↗
2. The economic and environmental benefits of increased use of pfa and granulated slag10.1016/0301-4207(75)90030-6 ↗
3. Collins RJ · 1994
4. The Effects of Different Cementing Materials and Curing on Concrete Scaling10.1520/CCA10291J ↗
5. Malhotra VM · 1987 · 291
6. Some properties of alkali-activated slag cements
7. High strength alkali-slag cement
8. Hydration of alkali-slag cements at 150 °C10.1016/0008-8846(91)90035-G ↗
9. Deja J · 1989 · 1547
10. Immobilization of radioactivewastes with Portland and alkali-slag cement pastes
11. Siliceous by-products for use in concrete10.1007/BF02472530 ↗
12. Effect of fire and cooling mode on the properties of slag mortars10.1016/S0008-8846(01)00561-0 ↗
13. Use of supplementary cementing materials to increase the resistance to chloride ion penetration of concretes cured at elevated temperatures
14. The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature: part I expansive behaviour10.1016/S0008-8846(02)01066-9 ↗
15. Durability of ternary blend concretes with silica fume and blast furnace slag: laboratory and outdoor exposure site studies
16. Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement10.1016/j.cplett.2004.05.071 ↗
17. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
18. Characteristics of cement mortar with nano-SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
19. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials10.1016/j.cemconres.2003.08.025 ↗
20. Abrasion resistance of concrete containing nanoparticles for pavement10.1016/j.wear.2005.08.006 ↗
21. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
22. Effects of nano-SiO2 and different ash particle sizes on sludge ash-cement mortar10.1016/j.jenvman.2007.03.036 ↗
23. Improvements of nano-SiO2 on sludge/fly ash mortar10.1016/j.wasman.2007.03.023 ↗
24. Sobolev K · 2009 · 139
25. A comparative study on the pozzolanic activity between nano-SiO2 and silica fume10.1007/BF02840907 ↗
26. How nanotechnology can change the concrete world: part 2
27. Flexural fatigue performance of concrete containing nano-particles for pavement10.1016/j.ijfatigue.2006.10.004 ↗
28. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite10.1016/j.matlet.2005.08.061 ↗
29. Modelling of the microstructure and transport properties of concrete10.1016/0950-0618(94)00019-0 ↗
30. Material properties of Portland cement paste with nano-montmorillonite10.1007/s10853-006-1462-0 ↗
31. Effects of organo-modified montmorillonite on strengths and permeability of cement mortars10.1016/j.cemconres.2005.11.013 ↗
32. Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles10.1016/j.msea.2010.08.095 ↗
33. The Effects of TiO2 Nanoparticles on Flexural Damage of Self-compacting Concrete
34. The effect of TiO2 nanoparticles on water permeability and thermal and mechanical properties of high strength self-compacting concrete10.1016/j.msea.2010.09.074 ↗
35. The effects of curing medium on flexural strength and water permeability of concrete incorporating TiO2 nanoparticles10.1617/s11527-010-9664-y ↗
36. The effects of zinc dioxide nanoparticles on flexural strength of self-compacting concrete10.1016/j.compositesb.2010.09.001 ↗
37. The effects of ZnO2 nanoparticles on split tensile strength of self-compacting concrete
38. Limewater effects on properties of ZnO2 nanoparticle blended cementitious composite10.1177/0021998310376118 ↗
39. Assessment of the effects of Fe2O3 nanoparticles on water permeability, workability, and setting time of concrete10.1177/0021998310377945 ↗
40. The effects of limewater on flexural strength and water permeability of Al2O3 nanoparticles binary blended concrete10.1177/0021998310378907 ↗
41. The effects of limewater on split tensile strength and workability of Al2O3 nanoparticles binary blended concrete10.1177/0021998310378909 ↗
42. The effects of TiO2 nanoparticles on properties of binary blended concrete10.1177/0021998310378910 ↗
43. Optimization mechanical properties of Cr2O3 nanoparticle binary blended cementitious composite10.1177/0021998310377944 ↗
44. 2001
45. 2001
46. Mercury Intrusion Porosimetry and Image nalysis of Cement-Based Materials10.1006/jcis.1998.5986 ↗
47. Development of technique for observing pores in hardened cement paste10.1016/S0008-8846(02)00806-2 ↗
48. Influencia de los superplastificantes en la microestructura de la pasta hidratada y en el comportamiento diferido de los morteros de cemento
49. Hans-Ërik G · 1999 · 211
50. Song HW · 2001 · 413
51. Hammer TA · 2001 · 423
52. Turcry P · 2003 · 576
53. Heirman G · 2003 · 606
54. Effect of cement type on chloride binding and corrosion of steel in concrete10.1016/0008-8846(95)00080-V ↗
55. Durability of marine concrete structures-field investigations and modeling
56. Corrosion inhibition in concrete arising from its acid neutralization capacity10.1016/S0010-938X(00)00008-1 ↗
57. Monitoring electrical resistance of concretes containing alternative cementitious materials to assess their resistance to chloride penetration10.1016/S0958-9465(01)00075-0 ↗
58. Flexural fatigue performance of concrete containing nanoparticles for pavement10.1016/j.ijfatigue.2006.10.004 ↗
59. Jawed J · 1983 · 284
60. Effect of content and particle size distribution of high calcium fly ash on the rheological properties of cement pastes10.1016/S0008-8846(97)00073-2 ↗
61. Production and characterisation of new calcium phosphate bone cements in the CaHPO4-a-Ca3(PO4)2 system: pH, workability and setting times
62. The role of the additions to cement in the concrete durability
63. 1987