journal article·2023Open access

KIc Determination of a 7075 T6 Aluminum Alloy by Critical Distances Theory and LEFM

Larissa Gomes Simão, Eduardo Atem de Carvalho

Materials Research· Volume 26· Issue suppl 1

Abstract

The Critical Distances Theory has been used in engineering field as a less expensive method to predict failures. Thus, this research aims to evaluate its methods in other materials, like the aluminum alloy 7075 T6, and notches. Two different notches were machined: a sharp and a blunted, with radius of 0,025 mm and 0,045 mm, respectively. The first in specimens of tests tension and the last in bend tests specimens. The DCT methods analyzed exhibited low percent differences and predictions mutually consistent. However, the Line Method stood out when presented 3% to percent difference. The analysis to stress field around of sharp notch tip, LM achieved a value of 12 MPa√m para KIc. Although, when these same results were applied in the Traditional Fracture Mechanics equations, a fracture toughness of 34 MPa√m was found. This last result is one of the best predictions achieved until the present moment in this research group. Mainly when compared with other works which determined the same property using the same thermal treatment conditions to this alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual do Norte Fluminense, Brasil

References (25)

Show source-provided references
1. Anderson TL · 2005
2. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
3. 2022
4. On the use of the Theory of Critical Distances to predict static failures in ductile metallic materials containing different geometrical features10.1016/j.engfracmech.2008.04.018 ↗
5. Terra RVA · 2013
6. 2007
7. Cavalcante FF · 2016
8. 2004 · 4
9. Residual fatigue life analysis and comparison of na aluminum lithium alloy structural repair for aviation applications10.1016/j.engfracmech.2018.03.020 ↗
10. Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T65110.1016/j.engfracmech.2006.12.031 ↗
11. Research on corrosion damage evolution of aluminum alloy for aviation10.3390/app10207184 ↗
12. Effect of heating rate on mechanical property, microstructure and texture evolution of Al-Mg-Si-Cu alloy during solution treatment10.1016/j.msea.2014.10.045 ↗
13. Structural fire behavior of aluminium alloy structures: review and outlook10.1016/j.engstruct.2022.114746 ↗
14. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-oriented design strategy10.1016/j.jmst.2021.05.011 ↗
15. The theory of critical distances applied to the prediction of brittle fracture in metallic materials
16. Neuber H · 1958
17. Peterson RE · 1959
18. 2017
19. 2016
20. Elastic field equations for blunt cracks with reference to stress corrosion cracking10.1007/BF00182890 ↗
21. The Theory of Critical Distances as an alternative experimental strategy for the determination of KIc and ΔKth10.1016/j.engfracmech.2010.04.016 ↗
22. 2014
23. Callister Jr WD · 2008
24. Farahmand B. · 1997
25. Tada H · 2000