journal article·2016-10-20Open access

Coir and Sisal Fibers as Fillers in the Production of Eucalyptus Medium Density Particleboards - MDP

Ricardo Gabriel de Almeida Mesquita, José Manoel Marconcini, Anand Ramesh Sanadi, Antônia Amanda da Silva César, Gustavo Henrique Denzin Tonoli, Thomas Mark Venås, Lourival Marin Mendes

Materials Research· Volume 19· Issue 6

Abstract

The aim of this study was to evaluate the potential use of sisal and coir fibers in combination with Eucalyptus particles for the production of particleboard. The particleboards were produced in three layers. The first and third layers (face) were made with small Eucalyptus particles. The second layer (core) was made with big Eucalyptus particles in combination with coir or sisal fibers. The particleboards were prepared with the substitution on Eucalyptus wood for sisal and coir fibers in the particleboards core, in doses of 0, 10, and 20%, relative to the total mass of particles. The particleboards were characterized by mechanical, physical and thermal properties. The results were not satisfactory for particleboards with sisal. However, for coir particleboards the physical-mechanical properties were very similar to those particleboards produced only with Eucalyptus. This work demonstrates the potential use of the coir that is commonly disposed in landfills on the Brazilian beaches.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Federal University of Lavras, Brazil; University of Copenhagen, Denmark

Brazilian Agricultural Research Corporation, Brazil

University of Copenhagen, Denmark

Federal University of Lavras, Brazil

Danish Technological Institute, Denmark

References (49)

Show source-provided references
1. Iwakiri S · 2005
2. Kelly MW · 1977
3. The family of wood composite materials
4. Barros Filho RM. · 2009
5. Propriedades de chapas fabricadas com partículas de madeira de paricá (Schyzolobium amazonicum Huber ex. Ducke) e fibras de coco (Cocos nucifera L.)10.1590/S0100-67622010000200016 ↗
6. Inclusion of sisal bundles in the production of eucalyptus MDP panels
7. Effects of the addition of splinter shell in quality of MDP panels produced with Eucalyptus sp.
8. Use of Cryptomaria japônica wood for the production of particleboard
9. Particleboard panels made from sugarcane bagasse: characterization for use in the furniture industry10.1590/1980-5373-MR-2015-0211 ↗
10. NaOH treatment impact in the dimensional stability of banana pseudostem particleboard panels10.4028/www.scientific.net/KEM.600.447 ↗
11. Hybrid chipboard panels based on sugarcane bagasse, urea formaldehyde and melamine formaldehyde resin10.1016/j.indcrop.2010.11.007 ↗
12. Bending moment capacity of L-type furniture corner joints constructed of particleboard produced from vine pruning residues
13. The potential of poppy (Papaver somniferum Linnaeus) husk for manufacturing wood-based particleboards10.1016/j.conbuildmat.2015.07.160 ↗
14. Use of Coffee Plant Stem in the Production of Conventional Particleboards10.4028/www.scientific.net/KEM.600.703 ↗
15. Use of maize cob for production of particleboard10.1590/S1413-70542013000400006 ↗
16. Effect of the incorporation of coffee husks on the physical-mechanical properties of Eucalyptus urophylla S.T. Blake particleboards
17. Propriedades físico-mecânicas de painéis aglomerados produzidos com diferentes proporções de madeira e casca de arroz10.5902/19805098899 ↗
18. Rice straw-wood article composite for sound absorbing wooden construction materials10.1016/S0960-8524(02)00163-3 ↗
19. Aging mechanism in cellulose fiber reinforced cement composites10.1016/S0958-9465(98)00050-X ↗
20. All-cellulose nanocomposites by surface selective dissolution of bacterial cellulose10.1007/s10570-009-9285-1 ↗
21. 2013
22. Chemical and structural characterization of sisal fibers from Agave sisalana variety
23. Properties of polyester/hybrid sisal-glass fabrics
24. Tensile properties of unsaturated polyester composites reinforced by short sisal fibers
25. Influence of fiber surface treatment on the properties of sisal-polyester composites10.1002/pc.10684 ↗
26. Development of coconut coir-based lightweight cement board10.1016/j.conbuildmat.2005.08.028 ↗
27. 1993
28. Maloney TM · 1993
29. 2006
30. 1982
31. New insulating particleboards from durian peel and coconut coir10.1016/S0360-1323(02)00030-6 ↗
32. New low-cost insulation particleboards from mixture of durian peel and coconut coir10.1016/j.buildenv.2003.08.001 ↗
33. Surface treatment of coir (Cocos nucifera) fibers and its influence on the fibers' physico-mechanical properties10.1016/j.compscitech.2007.01.009 ↗
34. The influence of fibre treatment on the performance of coir-polyester composites10.1016/S0266-3538(01)00021-5 ↗
35. Olsson AM · 1992 · 133
36. A study of bonding and failure mechanisms in fuel pellets from different biomass resources10.1016/j.biombioe.2010.11.003 ↗
37. Thermal transition of the amorphous polymers in wheat straw10.1016/j.indcrop.2011.03.014 ↗
38. Causes of poor adhesion: weak boundary layers10.1021/ie51403a010 ↗
39. Fuel pellets from wheat straw: The effect of lignin glass transition and surface waxes on pelletizing properties10.1007/s12155-011-9169-8 ↗
40. 1993
41. Analysis of the gluing quality pf particles from OSB panels in laboratorial conditions
42. Urea-formaldehyde (UF) adhesive resins for wood10.1016/S0143-7496(97)00054-7 ↗
43. Adhesives based on formaldehyde condensation resins10.1002/masy.200451338 ↗
44. Synthesis of urea-formaldehyde resin by melt condensation polymerization10.1007/s10965-008-9194-2 ↗
45. Mechanical properties of flakeboards made from pine, eucalyptus and wattle wood
46. Thermal properties of wood-gypsum boards10.1007/s00107-005-0074-8 ↗
47. Mechanical and thermal properties of particle boards made from farm residues10.1016/0960-8524(92)90151-M ↗
48. Particle boards from Papyrus fibers as thermal insulation10.3923/jas.2011.2640.2645 ↗
49. The effects of some production factors on thermal conductivity of oriented strand board