Experimental Investigation on the Effect of Stacking Sequence on Damage Resistance and Post-indentation Performance of Glass/Epoxy Laminates Under Different Loading Planes Using Acoustic Emission Monitoring
Source abstract
Abstract
This research work focuses on the experimental investigation of indentation damage resistance and post-indented performance of different stacking sequence of glass/epoxy laminates using mechanical and acoustic responses. The laminates with stacking sequence, namely [0]12, [0/90]6S, [+45/-45]6S and [0/+45/-45/90]3S were subjected to normal and inclined indentation with acoustic emission monitoring. Quasi-static indentation (QSI) test was conducted on the center of the laminates using a hemispherical steel indenter with 12.7 mm diameter. The residual strength of the laminates was computed by conducting flexural after indentation test. Mechanical responses such as peak force, residual dent, linear stiffness and absorbed energy were employed to assess induced damages. The results reveal that the quasi-isotropic (QIS) laminates having better indentation damage resistance under 0o and 10o loading planes, whereas the angle-ply (AP) laminates performed well at 20o. Moreover, the normalised cumulative counts, energy rate, peak frequency, AE hits and sentry function were used to evaluate the damage initiation and propagation. Further, AE results show that the shear induced damage has been reduced in AP as compared with QIS laminates under 20o indentation plane. Finally, this study concluded that the QIS and AP laminates exhibited better indentation resistance under 0o and 10o, and 20o loading planes respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jeppiaar Engineering College, India
Anna University, India
Bharath Institute of Higher Education and Research, India
References (39)
Show source-provided references
1. Low velocity impact on carbon/epoxy tubes subjected to torque - experimental results, analytical models and FEM analyses10.1016/j.compstruct.2009.09.035 ↗
2. Carbon fibre reinforced plastics in aircraft construction10.1016/j.msea.2005.08.064 ↗
3. Experimental investigation on the effect of glass fiber orientation on impact damage resistance under cyclic indentation loading using AE monitoring10.1080/10589759.2019.1684491 ↗
4. Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact10.1016/j.compositesa.2016.06.023 ↗
5. Impact damage characterization of carbon fbre/epoxy composites with multi-layer reinforcement10.1016/S1359-8368(00)00028-7 ↗
6. Investigation of the response to low velocity impact and quasi-static indentation loading of particle-toughened carbon-fiber composite materials10.1016/j.compositesa.2015.03.016 ↗
7. Characterization of indentation damage resistance of hybrid composite laminates using acoustic emission monitoring10.1016/j.compositesb.2016.12.012 ↗
8. Damage propagation in CFRP laminates subjected to low velocity impact and static indentation10.1163/156855107779755318 ↗
9. Investigation of indentation damage resistance on normal and inclined plane of glass/epoxy composite laminates using acoustic emission monitoring10.1177/0021998320906864 ↗
10. An experimental study on quasi-static indentation, low-velocity impact and damage behaviors of laminated composites at high temperatures
11. Comparing damage from low-velocity impact and quasi-static indentation in automotive carbon/epoxy and glass/polyamide-6 laminates10.1016/j.polymertesting.2017.11.023 ↗
12. The Use of quasi-static indentation testing to evaluate low-velocity impact resistance of ex situ toughened composite10.4028/www.scientific.net/AMM.697.35 ↗
13. Prediction of permanent indentation due to impact on laminated composites based on an elasto-plastic model incorporating fiber failure10.1016/j.compstruct.2012.08.054 ↗
14. Experimental study of the indentation of sandwich panels with carbon fibre-reinforced polymer face sheets and polymeric foam core10.1016/j.compositesb.2011.02.013 ↗
15. Sandwich composites impact and indentation behaviour study10.1016/j.compositesb.2013.02.014 ↗
16. Damage evaluation and strain monitoring of composite plate using metal-coated FBG sensors under quasi-static indentation10.1016/j.compositesb.2014.03.012 ↗
17. Low-velocity impact behavior of fibre glass-aluminum laminates10.1016/j.compositesa.2003.11.003 ↗
18. Classification of damages in composite images using Zernike moments and support vector machines10.1016/j.compositesb.2018.12.064 ↗
19. Automated damage detection and characterization of polymer composite images using Tsallis-particle swarm optimization-based multilevel threshold and multifractals10.1002/pc.25611 ↗
20. Effect of patch hybridization on indentation resistance and residual performance of patch repaired glass/epoxy laminates using acoustic emission monitoring10.1080/10589759.2020.1834556 ↗
21. Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements10.1016/j.compositesa.2013.08.003 ↗
22. Estimation of residual flexural strength of unidirectional glass fiber reinforced plastic composite laminates under repeated impact load10.1177/0021998314525484 ↗
23. Residual flexural strength after low-velocity impact in glass/polyester composite beams10.1016/j.compstruct.2009.06.007 ↗
24. Quasi-static indentation damage and residual compressive failure analysis of carbon fiber composites using acoustic emission and micro-computed tomography
25. Acoustic emission characterisation of failure modes in hemp/epoxy and glass/epoxy composite laminates
26. A global method for the identification of failure modes in fiber glass using acoustic emission10.1520/JTE103730 ↗
27. Damage characterization in glass/epoxy composite laminates under normal and oblique planes of cyclic indentation loading with AE monitoring
28. Optimization of acoustic emission parameters to discriminate failure modes in glass-epoxy composite laminates using pattern recognition
29. Characterization of failure mechanism in glass, carbon and their hybrid composite laminates in epoxy resin by acoustic emission monitoring10.1080/10589759.2019.1590829 ↗
30. Acoustic emission characterization of fracture toughness for fiber reinforced ceramic matrix composites10.1016/j.msea.2012.09.081 ↗
31. Damage monitoring of glass/epoxy laminates with different interply fiber orientation using acoustic emission10.1177/1475921720939064 ↗
32. Influence of milled glass fillers on mode-II fracture toughness of polymer composites10.1080/02670836.2022.2043029 ↗
33. Failure strength prediction of glass/epoxy composite laminates from acoustic emission parameters using artificial neural network10.1016/j.apacoust.2016.08.013 ↗
34. Analysis of Acoustic Emission energy release during static fatigue tests at intermediate temperatures on ceramic matrix composites: towards rupture time prediction10.1016/j.compscitech.2012.03.011 ↗
35. Measurement and calculation of thermal residual stress in fiber reinforced ceramic matrix composites10.1016/j.compscitech.2008.08.015 ↗
36. A comprehensive review on damage characterization in polymer composite laminates using acoustic emission monitoring10.1134/S106183092208006X ↗
37. Effect of the reinforcement phase on indentation resistance and damage characterization of glass/epoxy laminates using acoustic emission monitoring10.1155/2021/5768730 ↗
38. Characterization of residual strength in transversely loaded glass-polyester composites by acoustic emission and sentry function10.1016/j.matpr.2017.11.095 ↗
39. An integrated approach based on acoustic emission and mechanical information to evaluate the delamination fracture toughness at mode I in composite laminate10.1016/j.matdes.2010.08.048 ↗