journal article·2011-08-26Open access

Development and characterization of composite materials for production of composite risers by filament winding

Ledjane Lima Sobrinho, Verônica Maria de Araújo Calado, Fernando Luiz Bastian

Materials Research· Volume 14· Issue 3

Abstract

Industry has been challenged to provide riser systems which are more cost effective and which can fill the technology gaps with respect to water depth, riser diameter and high temperatures left open by flexibles, steel catenary risers (SCRs) and hybrid risers. Composite materials present advantages over conventional steel risers because composite materials are lighter, more fatigue and corrosion resistant, better thermal insulators and can be designed for improving the structural and mechanical response. This paper contains a study of the toughening mechanism of an epoxy resin under rubber addition by means of fractographic analysis and its relation with the fracture process and increase of strength of a composite riser employing this polymeric matrix. Initially, an epoxy resin system was toughened by rubber CTBN addition (10 wt. (%)) as a way of improving the flexibility of future risers. Mechanical and thermal analyses were carried out for characterizing the polymeric systems. Later, composite tubes were prepared and mechanically characterized. The influence of matrix toughening on the mechanical behavior of the tubes was also studied. Split-disk tests were used to determine the hoop tensile strength of these specimens. The results indicate that the matrix plays an important role in composite fracture processes. The adding rubber to the polymeric matrix promoted a simultaneous increase of stress and elongation at fracture of the tubes manufactured herein, which is not often reported. These results, probably, is function of better adhesion between fibers and polymeric matrix observed in the CTBN-modified composite rings, which was evidenced in the fractografic analysis by SEM after the split-disk tests.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Processing · Material Selection and Properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Ceará, Brazil

Universidade Federal do Rio de Janeiro, Brazil

References (43)

Show source-provided references
1. Odru P · 2002 · 1
2. Development of Rigid Composite Risers - a Status Report
3. Salama MM · 1986 · 297
4. Slagsold L · 2001 · 93
5. Odru P · 2002 · 1
6. Odru P · 2003 · 1
7. Interactions of water with unsaturated polyester, vinyl ester and crylic resins10.1016/0032-3861(92)90657-I ↗
8. Modification of epoxy resin using reactive liquid (ATBN) rubber10.1016/S0014-3057(01)00194-X ↗
9. Effect of carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin10.1016/j.msea.2006.09.031 ↗
10. Fracture response of pipelines subjected to large plastic deformation under tension10.1016/j.ijpvp.2004.04.005 ↗
11. Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber10.1016/j.polymer.2007.11.030 ↗
12. Fatigue and fracture bahaviour of novel rubber modified epoxy resin.10.1016/0032-3861(96)83142-9 ↗
13. Effect of carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin.10.1016/j.msea.2006.09.031 ↗
14. Studies on the physico-mechanical and thermal characteristics of blends of DGEBA epoxy, 3,4 epoxy cyclohexylmethyl, 3', 4'-epoxycylohexane carboxylate and carboxyl terminated butadiene co-acrylonitrile (CTBN)10.1016/j.msea.2008.06.035 ↗
15. Modification of epoxy resin using reactive liquid (ATBN) rubber10.1016/S0014-3057(01)00194-X ↗
16. Influence of carboxylterminated (butadiene-co-acrylonitrile) loading on the mechanical and thermal properties of cures epoxy blends10.1002/polb.20115 ↗
17. Studies on heterogeneous polymeric systems.10.1002/pol.1956.1202210114 ↗
18. Deformation and fracture behaviour of a rubber-toughened epoxy: 2. Failure criteria10.1016/0032-3861(83)90071-X ↗
19. Fracture of Epoxy-Modified and Elastomer-Modified Epoxy Polymers in Bulk and as Adhesives10.1002/app.1975.070190917 ↗
20. Use of rubber modification technique to improve fracture-resistance of hoop wound composites10.1016/j.matdes.2008.09.001 ↗
21. A model for the toughness of epoxy-rubber particulate composites.10.1007/BF00551799 ↗
22. Low-temperature behaviour of epoxyrubber particulate composites10.1007/BF00540323 ↗
23. Polymer Properties
24. Bragaw CG · 1971
25. Wolock I · 1964 · 235
26. Phase separation in liquid rubber modified epoxy mixture. Relationship between curing conditions, morphology and ultimate behavior10.1016/S0032-3861(00)00798-9 ↗
27. Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin - Effects of a liquid rubber inclusion10.1016/j.polymer.2007.01.018 ↗
28. Kinloch AJ · 1983
29. Investigation of effect of hygrothermal conditions on epoxy system by fractography and computer simulation.10.1016/j.matlet.2005.06.061 ↗
30. Kinloch AJ · 1989
31. Characterization of liquid carboxy terminated copolymer of butadiene acrilonitrile modified epoxy resin10.1002/pen.11533 ↗
32. Hybrid composites of epoxy resin modified with carboxyl terminated butadiene acrylonitrile copolymer and fly ash microspheres10.1016/j.polymertesting.2004.08.007 ↗
33. Stereolithography somos 7110 resin: mechanical behavior and fractography of parts post-cured by different methods10.1016/j.polymertesting.2004.09.008 ↗
34. Toughening of vinyl ester resin using butadiene-acrylonitrile rubber modifiers10.1016/j.polymer.2004.07.003 ↗
35. Chemico-diffusion kinetics epoxy-amine resins10.1016/S0032-3861(96)00882-8 ↗
36. May CA · 1988
37. Preparation, Thermal Properties, and Flame Retardance of Epoxy-Silica Hybrid Resins10.1002/pola.10778 ↗
38. Toughening of a trifunctionalepoxy system Part III. Kinetic and morphological study of the thermoplastic modified cure process10.1016/S0032-3861(99)00503-0 ↗
39. Hunston DL · 1984
40. The effect of interlaminar toughening strategies on the energy adbosrption of composite tubes10.1016/j.compositesa.2003.11.001 ↗
41. Rubber-Toughening of Glass Fiber-Epoxy Filament Wound Composites.10.1002/pen.760311410 ↗
42. Use of split-disk tests for the process parameters of filament wound epoxy composite tubes10.1016/j.polymertesting.2005.03.012 ↗
43. Mallick PK · 1993