journal article·2017-08-31Open access

Determination of the Mechanical Properties of Epoxy Silica Nanocomposites through FEA-Supported Evaluation of Ball Indentation Test Results

Dimitrios Tzetzis, Konstantinos Tsongas, Gabriel Mansour

Materials Research· Volume 20· Issue 6

Abstract

In the present paper a continuous Finite Element Analysis (FEA) simulation method of the ball indentation hardness test is introduced in order to describe the deformation behavior of nanosilica composites and with this to extract precisely the material's stress-strain behavior. The developed procedure demonstrate in particular the adequacy of this method to determine the nanocomposites' elastic modulus which is compared with Halpin-Tsai and Lewis-Nielsen models as well as with experimental measurements taken from uniaxial tensile tests. The fracture area of all the tensile specimens was examined using a scanning electron microscope (SEM). It is shown that the correlation between the experimental results, the semi-empirical models and the FEA computational models concerning the elastic modulus values was satisfactory with very small deviations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Advanced ceramic materials synthesis · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Hellenic University, Greece

Aristotle University of Thessaloniki, Greece

References (31)

Show source-provided references
1. The influence of long term water immersion ageing on impact damage behavior and residual compression strength of glass fibre reinforced polymer (GFRP)10.1016/j.matdes.2007.07.008 ↗
2. Berketis K · 2009 · 913
3. Berketis K · 2011 · 1
4. Impact damage detection and degradation monitoring of wet GFRP composites using noncontact ultrasonics10.1002/pc.20652 ↗
5. The compression-after-impact strength of woven and non-crimp composites subjected to long-term water immersion ageing10.1007/s10853-010-4626-x ↗
6. Investigation of the dynamic mechanical properties of epoxy resins modified with elastomers10.1016/j.compositesb.2016.03.024 ↗
7. Modal testing of nanocomposite materials through an optimization algorithm10.1016/j.measurement.2016.05.032 ↗
8. The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles10.1016/j.polymer.2010.10.048 ↗
9. The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles10.1007/s10853-009-4064-9 ↗
10. The influence of surface morphology on the interfacial adhesion and fracture behavior of vacuum infused carbon fiber reinforced polymeric repairs10.1002/pc.20314 ↗
11. Infield composites repair techniques for combat aircraft: research and development perspective10.1179/175355507X196475 ↗
12. Double cantilever beam Mode-I testing for vacuum infused repairs of GFRP10.1163/156856103762864642 ↗
13. Tiny particles, huge effect
14. Epoxy-silica particulate nanocomposites: Chemical interactions, reinforcement and fracture toughness10.1016/j.polymer.2005.08.028 ↗
15. The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers10.1007/s10853-005-1716-2 ↗
16. The fracture and fatigue behaviour of nano-modified epoxy polymers10.1007/s10853-007-1768-6 ↗
17. Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content10.1016/j.actamat.2005.12.009 ↗
18. Effect of silica nanoparticles on compressive properties of an epoxy polymer10.1007/s10853-010-4683-1 ↗
19. A Nanomechanical Approach on the Measurement of the Elastic Properties of Epoxy Reinforced Carbon Nanotube Nanocomposites
20. Nanoindentation Measurements of Fumed Silica Epoxy Reinforced Nanocomposites10.1177/0731684412463978 ↗
21. Nanomechanical Characterization of Hybrid Multiwall Carbon Nanotube and Fumed Silica Epoxy Nanocomposites10.1080/03602559.2013.769581 ↗
22. Nanoindentation of silica nanoparticles attached to a silicon substrate10.1007/s11249-006-9079-7 ↗
23. Thin hard coatings stress-strain curve determination through a FEM supported evaluation of nanoindentation test results10.1016/S0257-8972(01)01275-0 ↗
24. Loubet JL · 1985 · 72
25. Stiffness and Expansion Estimates for Oriented Short Fiber Composites10.1177/002199836900300419 ↗
26. The Halpin-Tsai equations: a review10.1002/pen.760160512 ↗
27. Dynamic mechanical properties of particulate-filled composites10.1002/app.1970.070140604 ↗
28. Combining rules for predicting the thermoelastic properties of particulate filled polymers, polymers, polyblends, and foams10.1002/pc.750020403 ↗
29. The interlaminar toughness of carbon-fibre reinforced plastic composites using 'hybrid toughened' matrices10.1007/s10853-006-0130-8 ↗
30. Nielsen LE · 1993
31. Toughening mechanisms of nanoparticle-modified epoxy polymers10.1016/j.polymer.2006.11.038 ↗