Nanostructured composites based on carbon nanotubes and epoxy resin for use as radar absorbing materials
Source abstract
Abstract
Nanostructured polymer composites have opened up new perspectives for multifunctional materials. In particular, carbon nanotubes (CNTs) present potential applications in order to improve mechanical and electrical performance in composites with aerospace application. The combination of epoxy resin with multiwalled carbon nanotubes results in a new functional material with enhanced electromagnetic properties. The objective of this work was the processing of radar absorbing materials based on formulations containing different quantities of carbon nanotubes in an epoxy resin matrix. To reach this objective the adequate concentration of CNTs in the resin matrix was determined. The processed structures were characterized by scanning electron microscopy, rheology, thermal and reflectivity in the frequency range of 8.2 to 12.4 GHz analyses. The microwave attenuation was up to 99.7%, using only 0.5% (w/w) of CNT, showing that these materials present advantages in performance associated with low additive concentrations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Aeronautical Institute of Technology - ITA, Brazil
Institute of Aeronautics and Space, Brazil
Institute of Aeronautics and Space, Brazil; Universidade Estadual Paulista - UNESP, Brazil
References (64)
Show source-provided references
1. Microwave absorbing performances of multiwalled carbon nanotube composites with negative permeability10.1063/1.2755875 ↗
2. Materials processing by simple shear
3. Dielectric microwave absorbing material processed by impregnation of carbon fiber fabric with polyaniline10.1590/S1516-14392007000100020 ↗
4. Characterization of electromagnetic properties of polymeric composite materials with free space method10.1016/j.compstruct.2004.04.076 ↗
5. Microwave absorbing properties of Co-substituted Ni2W hexaferrites in Ka-band frequencies (26.5-40 GHz)10.1109/TMAG.2002.802483 ↗
6. Microwave applications of soft ferrites10.1016/S0304-8853(00)00106-2 ↗
7. Microwave Absorbing Materials10.1023/A:1004171120638 ↗
8. Folgueras LC · 2009 · 510
9. Electromagnetic wave absorbers and anechoic chambers through the years10.1109/TAP.1973.1140517 ↗
10. Magnetic materials based on manganese-zinc ferrite with surface-organized polyaniline coating10.1016/j.jmmm.2005.06.015 ↗
11. Gupta SC · 1992 · 317
12. Hexaferrite contribution to microwave absorbers characteristics10.1109/20.312461 ↗
13. Lee SM · 1991
14. Microwave electromagnetic and absorption properties of some LiZn ferrites10.1016/S0304-8853(03)00617-6 ↗
15. Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry10.1002/polb.20220 ↗
16. The conductivity behavior of multi-component epoxy, metal particle, carbon black, carbon fibril composites10.1002/app.10808 ↗
17. Cure kinetics of neat and graphite-fiber-reinforced epoxy formulations10.1002/app.1989.070370917 ↗
18. The effect of particle-matrix adhesion on the mechanical behavior of glass filled epoxies: Part 1. A study on yield behavior and cohesive strength10.1016/S0032-3861(03)00371-9 ↗
19. Surfactant-Assisted Processing of Carbon Nanotube/Polymer Composites10.1021/cm9906396 ↗
20. Dynamic mechanical behavior of in situ functionalized multi-walled carbon nanotube/phenoxy resin composite10.1016/S0009-2614(03)00621-3 ↗
21. Mechanical properties and interfacial characteristics of carbon-nanotube-reinforced epoxy thin films10.1063/1.1511532 ↗
22. Failure mechanisms of carbon nanotube/epoxy composites pretreated in different temperature environments10.1016/S0008-6223(02)00245-2 ↗
23. Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties10.1016/S0032-3861(99)00166-4 ↗
24. Thermal properties of carbon nanotubes and nanotube-based materials10.1007/s003390201277 ↗
25. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
26. Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties10.1016/j.progpolymsci.2009.09.003 ↗
27. Electrical and mechanical properties of carbon nanotube-epoxy nanocomposites10.1002/app.31122 ↗
28. Influence of dispersion states of carbon nanotubes on mechanical and electrical properties of epoxy nanocomposites
29. Dispersion of carbon nanotubes and polymer nanocomposite fabrication using trifluoroacetic acid as a co-solvent
30. Toolbox for Dispersing Carbon Nanotubes into Polymers To Get Conductive Nanocomposites10.1021/cm051881h ↗
31. Clay Assisted Dispersion of Carbon Nanotubes in Conductive Epoxy Nanocomposites10.1002/adfm.200600785 ↗
32. Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites10.1016/j.polymer.2006.01.029 ↗
33. The Effect of Aggregation on the Electrical Conductivity of Spin-Coated Polymer/Carbon Nanotube Composite Films10.1021/la062794m ↗
34. Effect of the length and the aggregate size of MWNTs on the improvement efficiency of the mechanical and electrical properties of nanocomposites-experimental investigation10.1016/S1359-835X(03)00140-4 ↗
35. Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes10.1002/adfm.200700065 ↗
36. Formation of percolating networks in multi-wall carbon-nanotube-epoxy composites10.1016/j.compscitech.2004.01.025 ↗
37. Multiwall carbon nanotube/epoxy composites produced by a masterbatch process10.1007/s11029-006-0050-3 ↗
38. Improved mechanical properties of coiled carbon nanotubes reinforced epoxy nanocomposites10.1016/j.compositesa.2005.09.019 ↗
39. Shear-induced preferential alignment of carbon nanotubes resulted in anisotropic electrical conductivity of polymer composites10.1016/j.carbon.2006.05.008 ↗
40. Role of Interfacial Effects in Carbon Nanotube/Epoxy Nanocomposite Behavior
41. Dispersion of Functionalized Carbon Nanotubes in Polystyrene10.1021/ma020890y ↗
42. Improving the Dispersion and Integration of Single-Walled Carbon Nanotubes in Epoxy Composites through Functionalization10.1021/nl0342489 ↗
43. Reinforcing Epoxy Polymer Composites Through Covalent Integration of Functionalized Nanotubes10.1002/adfm.200305162 ↗
44. Morphology, thermal expansion, and electrical conductivity of multiwalled carbon nanotube/epoxy composites10.1002/app.27614 ↗
45. Comparative analysis of electric, magnetic, and mechanical properties of epoxy matrix composites with different contents of multiple walled carbon nanotubes10.1002/pc.20288 ↗
46. Processing-structure-multi-functional property relationship in carbon nanotube/epoxy composites10.1016/j.carbon.2006.05.014 ↗
47. Polymer Nanocomposites Containing Carbon Nanotubes10.1021/ma060733p ↗
48. Experimental determination of microwave attenuation and electrical permittivity of double-walled carbon nanotubes10.1063/1.2193464 ↗
49. Microwave Absorption of Single-Walled Carbon Nanotubes/Soluble Cross-Linked Polyurethane Composites10.1021/jp0731396 ↗
50. Comparison study on the effect of carbon nano materials for single-layer microwave absorbers in X-band10.1016/j.compscitech.2007.10.035 ↗
51. Reduction of satellite electromagnetic scattering by carbon nanostructured multilayers10.1016/j.actaastro.2013.03.003 ↗
52. Optimization of Multilayer Shields Made of Composite Nanostructured Materials10.1109/TEMC.2011.2171688 ↗
53. Broadband Electromagnetic Absorbers Using Carbon Nanostructure-Based Composites10.1109/TMTT.2011.2160198 ↗
54. X-Band microwave characterization of carbon-based nanocomposite material, absorption capability comparison and RAS design simulation10.1016/j.compscitech.2009.11.015 ↗
55. 2008
56. Percolation in carbon black filled epoxy resin10.1002/masy.19961040122 ↗
57. Agglomeration and electrical percolation behavior of carbon black dispersed in epoxy resin10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G ↗
58. Structure and crystallization behavior of Nylon 66/multi-walled carbon nanotube nanocomposites at low carbon nanotube contents10.1016/j.polymer.2007.04.030 ↗
59. Functionalized Single-Walled Carbon Nanotubes for Carbon Fiber-Epoxy Composites10.1021/jp071329a ↗
60. Mechanical Properties of Carbon Nanotubes and Their Polymer Nanocomposites10.1166/jnn.2005.181 ↗
61. Multi-walled carbon nanotubes reinforced nylon 6 composites10.1016/j.polymer.2006.04.020 ↗
62. Balanis CA · 1989
63. Microwave absorbing paints and sheets based on carbonyl iron and polyaniline: measurement and simulation of their properties10.5028/jatm.2010.02016370 ↗
64. Multilayer radar absorbing material processing by using polymeric nonwoven and conducting polymer10.1590/S1516-14392008000300003 ↗