journal article·2022Open access

Development and Experimental Investigation of Pigeon Pea Stalk Particle Reinforced Epoxy Composites and their Hybrid Composites for Lightweight Structural Applications

Nagaraj Malleshappa Pujar, Yuvaraja Mani

Materials Research· Volume 25

Abstract

The pigeon pea (PP) stalk is a sustainable lignocellulosic material left by the farmers after harvesting its pulses. The use of agricultural residue in the development of polymer composites is a step towards sustainability. This study focuses on developing and characterizing the mechanical properties (the tensile, flexural, interlaminar shear, compression, impact, and hardness) of less utilized agro-based PP stalk particle reinforced epoxy composites and their hybrid composites. In addition, the density, dynamic mechanical analysis, water absorption, and morphology were also investigated for a better understanding of these composites. In comparison to other agro-residue reinforced composites, PP stalk particles (up to 20 wt.%) reinforced epoxy composites have demonstrated comparable mechanical, viscoelastic, and water absorption characteristics. Jute/PP/epoxy and glass/PP/epoxy hybrid composites outperformed PP/epoxy composites in mechanical, dynamic, and water absorption characteristics. The ranking of the composites based on the characterization was done using the TOPSIS method, and glass/PP/epoxy composite with a 20 wt.% was identified as the best performer among all the composites. The results demonstrated that PP stalk particle reinforced composites are a viable alternative to wood and other natural fiber-based composites and could be used in lightweight structural applications such as automotive interiors, furniture, packaging containers, and cascading applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PSG College of Technology, India

References (46)

Show source-provided references
1. Unburned sugarcane bagasse: bio-based phenolic thermoset composites as an alternative for the management of this agrowaste10.1007/s10924-020-01848-y ↗
2. Effect of torrefaction on the physicochemical properties of pigeon pea stalk (Cajanus cajan) and estimation of kinetic parameters10.1016/j.renene.2019.02.022 ↗
3. Agricultural waste fibers towards sustainability and advanced utilization: a review
4. Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite10.1016/j.matdes.2013.03.102 ↗
5. Influence of bagasse/sisal fibre stacking sequence on the mechanical characteristics of hybrid-epoxy composites10.1080/15440478.2019.1581119 ↗
6. Reinforcement of Aramid fiber with bagasse epoxy bio-degradable composite: investigations on mechanical properties and surface morphology10.1016/j.jmrt.2019.05.008 ↗
7. Mechanical performance of short banana/sisal hybrid fiber reinforced polyester composites10.1177/0731684408095033 ↗
8. An experimental investigation on dynamic and mechanical characterization of olive pomace-filled glass/epoxy composite laminates10.1007/s40430-020-02592-z ↗
9. Analysis of the current situation and future outlooks for pigeon pea (Cajanus Cajan) production in Oyo State, Nigeria: a Markov Chain model approach
10. KalyanaSundaram S. Extraction and characterization of novel natural cellulosic fibers from pigeon pea plant10.1080/15440478.2018.1534184 ↗
11. Agriculture biomass in India: Part 1. Estimation and characterization10.1016/j.resconrec.2015.06.003 ↗
12. Pulp and papermaking characteristics of Cajanus cajan stems from sudan
13. Application of pigeon pea (Cajanus cajan) stalks as raw material for xylooligosaccharides production10.1007/s12010-013-0151-0 ↗
14. Cement-bonded composite boards with arhar stalks10.1016/j.cemconcomp.2007.07.004 ↗
15. Thermochemical characterization of pigeon pea stalk for its efficient utilization as an energy source10.1080/00908310050013965 ↗
16. Preparation and studies of pigeon pea stalk/polypropylene composites with and without compatibilizer10.1177/0967391119847849 ↗
17. Extraction and refinement of agricultural plant fibers for composites manufacturing10.1016/j.crci.2018.07.001 ↗
18. A new natural cellulosic pigeon pea (Cajanus cajan) pod fiber characterization for bio-degradable polymeric composites10.1080/15440478.2019.1689887 ↗
19. Voids in fiber-reinforced polymer composites: a review on their formation, characteristics, and effects on mechanical performance10.1177/0021998318772152 ↗
20. Tensile, impact and fracture toughness properties of banana fibre-reinforced polymer composites
21. Physical and mechanical behaviour of sugarcane bagasse fibre-reinforced epoxy bio-composites10.3390/ma13235387 ↗
22. Preparation and property evaluation of Glass/Ramie fibers reinforced epoxy hybrid composites10.1016/j.compositesb.2018.12.049 ↗
23. Flexural behavior of epoxy matrix composites reinforced with malva fiber10.1590/1516-1439.359514 ↗
24. Production of epoxy composites reinforced by different natural fibers and their mechanical properties10.1016/j.compositesb.2019.03.020 ↗
25. Optimization of short Indian Areca fruit husk fiber (Areca catechu L.)–reinforced polymer composites for maximizing mechanical properties10.1080/1023666X.2016.1110765 ↗
26. Composites: part B Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites10.1016/j.compositesb.2012.04.068 ↗
27. Dynamic mechanical and dielectric behavior of banana – glass hybrid fiber reinforced polyester composites10.1177/0731684409103075 ↗
28. Effect of layering pattern on the dynamic mechanical properties and thermal degradation of oil palm-jute fibers reinforced epoxy hybrid composite10.15376/biores.6.3.2309-2322 ↗
29. The quasi-static and dynamic mechanical behavior of epoxy matrix composites reinforced with curaua fibers
30. Evaluation of dynamic mechanical properties of fique fabric/epoxy composites10.1590/1980-5373-mr-2019-0125 ↗
31. Multi-criteria decision-making tools for material selection of natural fibre composites: A review10.15282/jmes.12.1.2018.5.0299 ↗
32. Comparative assessment of mechanical properties of groundnut shell and rice husk reinforced epoxy composites
33. Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite10.1177/0731684411426810 ↗
34. Effect of fibre ratio and chemical treatment on the properties of pineapple leaf and betel nut husk fibre-reinforced hybrid polypropylene composites
35. Alkali and silane treatments towards exemplary mechanical properties of kenaf and pineapple leaf fibre-reinforced composites10.1007/s42235-020-0031-6 ↗
36. Development of polypropylene/banana peel (treated and untreated) composites with and without compatibilizer and their studies10.1088/2053-1591/ab2eea ↗
37. Effect of surface treatment on betel nut (Areca catechu) fiber in polypropylene composite10.1007/s10924-011-0405-2 ↗
38. Influence of prosopis juliflora wood flour in poly lactic acid - developing a novel bio-wood plastic composite
39. Effect of fiber length on mechanical behavior of coir fiber reinforced epoxy composites10.1007/s12221-011-0073-9 ↗
40. Mechanical and physical performance of date palm/bamboo fibre reinforced epoxy hybrid composites10.1016/j.jmrt.2021.08.115 ↗
41. Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: a study into mechanical behavior related to structural and rheological properties10.1016/j.polymertesting.2019.01.017 ↗
42. A comparative investigation of bio waste filler (wood apple-coconut) reinforced polymer composites10.1002/pc.22648 ↗
43. Fully bio-based agro-waste soy stem fiber reinforced bio-epoxy composites for lightweight structural applications: influence of surface modification techniques10.1016/j.conbuildmat.2021.124509 ↗
44. Mechanical properties, water absorption, and chemical resistance of napier grass fiber strand–reinforced epoxy resin composites10.1080/1023666X.2014.954186 ↗
45. Ricinus communis fiber as potential reinforcement for lightweight polymer composites10.1088/2053-1591/aad617 ↗
46. Tensile, flexural and compressive properties of sisal/silk hybrid composites10.1177/0731684407079347 ↗