Analysis of Spinodal Decomposition in Al-Zn and Al-Zn-Cu Alloys Using the Nonlinear Cahn-Hilliard Equation
Source abstract
Abstract
The phase field model based on the nonlinear Cahn-Hilliard equation was applied to analyze the spinodal decomposition process in Al-Zn and Al-Zn-Cu alloys. Partial differential equations were solved using the explicit finite difference method for the Al-20, and 35 at. % Zn alloys aged at temperatures between 25 and 100 C for times from 10 s to 2000 s and Al-20at.%Zn-10at.%Cu and Al-20at.%Zn-5at.%Cu alloys at temperatures between 400 and 500 C for times from 3600 to 360000 s. Thermo-Calc indicated that the copper addition extends the presence of the metastable miscibility gap up to a temperature of about 597 C in comparison to the temperature of 350 C for the binary case. This miscibility gap was calculated assuming that the equilibrium phases were not present and thus it is only existing at the early stages of aging. Simulation results pointed out that the phase decomposition process is much faster in the binary alloys than that in the ternary alloys in spite of the higher aging temperature for the latter case.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Politecnico Nacional, Mexico
Instituto Tecnológico de Pachuca, Mexico
Universidad Politecnica, Mexico
References (19)
Show source-provided references
1. General Rule of Phase Decomposition in Zn-Al Based Alloys (II) --On Effects of External Stresses on Phase Transformation--10.2320/matertrans.45.3083 ↗
2. The (α1 + α2) miscibility gap of the Al-Zn-Cu system at 360 °C10.1016/j.scriptamat.2009.02.057 ↗
3. Thermodynamic calculation on the miscibility gap of fcc-Al based solid solution in the Al-Zn-Cu system10.1016/j.jallcom.2008.11.076 ↗
4. Microstructure and Mechanical Property of α-Al-Zn-Cu Alloys Aged at Room Temperature10.2320/matertrans1989.36.490 ↗
5. Effect of Copper Content on the Mechanical and Tribological Properties of ZnAl27-Based Alloys10.1023/A:1024817304351 ↗
6. Effect of nickel additions on the mechanical and sliding wear properties of Al-40Zn-3Cu alloy10.1016/j.wear.2009.10.002 ↗
7. The Forty-Seventh Honda Memorial Lecture - Recent Developments and the Future of Computational Science on Microstructure Formation10.2320/matertrans.43.1266 ↗
8. Numerical Simulation of Phase Separation in Fe-Cr Binary and Fe-Cr-Mo Ternary Alloys with Use of the Cahn-Hilliard Equation10.2355/isijinternational.40.914 ↗
9. Spinodal Decomposition in an Fe-32 at%Cr Alloy during Isothermal Aging10.2320/matertrans.M2009029 ↗
10. Microstructural simulation of phase decomposition in Cu-Ni alloys10.1016/j.jallcom.2007.05.070 ↗
11. Mehner H · 1990 · 290
12. Hilliard JE · 1970 · 497
13. Pearson WB · 1958
14. Precipitation and Dissolution Phenomena in Al-Zn Alloys
15. Effect of Cu addition on the α1+α2 miscibility gap of the Al-Zn system10.1016/j.scriptamat.2004.03.020 ↗
16. Hao S. · 2005 · 21
17. Spinodal decomposition in Al/Zn alloys10.1007/BF00550654 ↗
18. First-principles kinetic theory of precipitate evolution in Al-Zn alloys10.1088/0965-0393/10/2/303 ↗
19. Computer simulations of the phase transformation in real alloy systems based on the phase field method10.1016/S0921-5093(00)01896-7 ↗