journal article·2013-05-21Open access

Metallurgical response of an AISI 4140 steel to different plasma nitriding gas mixtures

Adão Felipe Oliveira Skonieski, Giovanni Rocha dos Santos, Thomas Karl Hirsch, Alexandre da Silva Rocha

Materials Research· Volume 16· Issue 4

Abstract

Plasma nitriding is a surface modification process that uses glow discharge to diffuse nitrogen atoms into the metallic matrix of different materials. Among the many possible parameters of the process, the gas mixture composition plays an important role, as it impacts directly the formed layer's microstructure. In this work an AISI 4140 steel was plasma nitrided under five different gas compositions. The plasma nitriding samples were characterized using optical and scanning electron microscopy, microhardness test, X-ray diffraction and GDOES. The results showed that there are significant microstructural and morphological differences on the formed layers depending on the quantity of nitrogen and methane added to the plasma nitriding atmosphere. Thicknesses of 10, 5 and 2.5 µm were obtained when the nitrogen content of the gas mixtures were varied. The possibility to obtain a compound layer formed mainly by γ'-Fe4N nitrides was also shown. For all studied plasma nitriding conditions, the presence of a compound layer was recognized as being the responsible to hinder the decarburization on the steel surface. The highest value of surface hardness - 1277HV - were measured in the sample which were nitrided with 3vol.% of CH4.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio Grande do Sul, Brazil

Stiftung Institut für Werkstofftechnik, Germany

References (21)

Show source-provided references
1. Ultra-low carbon (ULC) steel modified by triode plasma nitriding and PVD coating: Effects on micro-abrasive wear behavior10.1016/j.surfcoat.2011.08.021 ↗
2. Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding10.1016/j.matlet.2008.02.001 ↗
3. Wolfart M · 1996 · 303
4. Effect of the initial microstructure on the plasma nitriding behavior of AISI M2 high speed steel10.1016/j.surfcoat.2010.05.042 ↗
5. Steels: Processing, Structure and Performance
6. Tier MAD
7. The Influence of the ion current on plasma nitriding process10.1016/j.surfcoat.2004.09.004 ↗
8. Edenhofer B · 1998 · 257
9. Effect of CH4 addition on plasma nitrocarburizing of austenitic stainless steel10.1016/S0257-8972(02)00842-3 ↗
10. Nitrocarburizing and the Ternary Fe-N-C Phase-Diagram
11. Effect of different surface states before plasma nitriding on properties and machining behavior of M2 high-speed steel10.1016/S0257-8972(02)00768-5 ↗
12. Tier M · 2001 · 225
13. Microstructure and residual stresses of a plasma-nitrided M2 tool steel10.1016/S0257-8972(99)00063-8 ↗
14. Nitrided layer embrittlement due to edge effect on duplex treated AISI M2 high-speed steel10.1016/S0257-8972(03)00795-3 ↗
15. Bell, Plasma Surface Engineering of low alloy steel10.1016/0921-5093(91)90458-Y ↗
16. Estudo do perfil de carbono na camada nitretada do aço AISI M210.4322/tmm.00402002 ↗
17. Wear and friction behaviour of duplex-treated AISI 4140 steel10.1016/S0257-8972(99)00417-X ↗
18. Microstructural and topographical studies of DC-pulsed plasma nitrided AISI 4140 low-alloy steel10.1016/j.surfcoat.2005.01.060 ↗
19. O'Brien JM · 1991 · 4 · 420
20. Post-oxidizing treatments of the compound layer on the AISI 4135 steel produced by plasma nitrocarburizing10.1016/j.surfcoat.2004.07.093 ↗
21. Behavior of carbon in low temperature plasma nitriding layer of austenitic stainless steel10.1016/j.surfcoat.2004.08.179 ↗