journal article·2019Open access

Preparation of Syntactic Foams made from Green Polyethylene and Glass Microspheres: Morphological and Mechanical Characterization

Renato Lemos Cosse, Ana Carolina Lemos de Morais, Lucas Rafael Carneiro da Silva, Laura Hecker de Carvalho, José Francisco dos Reis Sobrinho, Renata Barbosa, Tatianny Soares Alves

Materials Research· Volume 22· Issue suppl 1

Abstract

Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of High Density Polyethylene (HDPE)/HGM syntactic foams containing 1% and 5% w/w HGM and 5% w/w of a compatibilizer are assessed. The composites were prepared by two processing routes: single screw extruder and twin screw extruder. The morphology and mechanical properties (tensile and impact) of the syntactic foams thus manufactured were ascertained. Morphological analysis indicated that matrix/filler adhesion was poor for all samples and that the best HGM dispersions were obtained in twin screw extruded samples. Mechanical properties were affected by the processing route adopted and by the content of hollow glass microspheres added. Elastic modulus, tensile strength and strain were reduced by 20, 10 and 23%, respectively, in systems processed in a twin screw extruder. Impact strength was the exception, with an increase of more than 300%. Higher contents of hollow glass microspheres led to reductions in mechanical strength of the syntactic foams, varying from 5% for the elastic modulus to 50% for strain.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Federal do Piauí, Brasil

Universidade Federal do Piauí, Brasil

Universidade Federal de Campina Grande, Brasil

References (46)

Show source-provided references
2. Preparation and characterization of hollow glass microsphere reinforced poly(butylene succinate) composites10.1016/j.matdes.2012.11.054 ↗
3. Bibin J · 2010
4. Bibin J · 2014 · 511
5. Mucccio EA · 1999
6. Fritschel L · 1973
7. On the elastic behaviour of syn-tactic foams10.1016/S0020-7683(00)00228-6 ↗
8. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
9. Interface engineering via compatibilization in HDPE composite reinforced with sodium borosilicate hollow glass microspheres10.1016/j.compositesa.2009.04.016 ↗
10. Lightweight and high-strength glass foams prepared by a novel green spheres hollowing technique10.1016/j.ceramint.2015.10.034 ↗
11. Specific properties and fracture toughness of syntactic foam: Effect of foam microstructures10.1016/j.compscitech.2005.03.012 ↗
12. Processing and compressive strengths of syntactic foams with and without fibrous reinforcements10.1002/app.1452 ↗
13. Effects of the type of processing on thermal, morphological and acoustic properties of syntactic foams10.1016/j.compositesb.2019.106933 ↗
14. Mechanical response of the fly ash cenospheres/polyurethane syntactic foams fabricated through infiltration process10.1016/j.conbuildmat.2019.02.047 ↗
15. Microstructural failure modes in three-phase glass syntactic foams10.1007/s10853-006-7601-9 ↗
16. A review of the feasibility of lightening structural polymeric composites with voids without compromising mechanical properties10.1016/j.cis.2010.07.005 ↗
17. Effect of silane chain length on the mechanical properties of silane-treated glass beads-filled PVC10.1163/156855407779819035 ↗
18. Predicting adhesion between a crystalline polymer and silane-treated glass surfaces in filled composites10.1163/15685610260427700 ↗
19. Reinforcement and quantitative description of inorganic particulate-filled polymer composites10.1016/j.compositesb.2013.03.019 ↗
20. Hollow glass microsphere HDPE composites for low energy sustainability10.1016/j.msea.2009.10.019 ↗
21. Effects of hollow glass microsphere density and surface modification on the mechanical and thermal properties of poly(methyl methacrylate) syntactic foams10.1016/j.compstruct.2018.02.088 ↗
22. Thermal Conductivity and Tensile Properties of Hollow Glass Microsphere/Polypropylene Composites
23. Tailoring of thermal and dielectric properties of LDPE-matrix composites by the volume fraction, density, and surface modification of hollow glass microsphere filler10.1016/j.compositesb.2013.10.029 ↗
24. High specific strength hybrid polypropylene composites using carbon fibre and hollow glass microspheres: Development, characterization and comparison with empirical models10.1016/j.compositesb.2019.05.086 ↗
25. The effect of hollow glass microspheres on the properties of high silica glass fiber fabric/liquid silicone rubber composite sheet10.14314/polimery.2018.3.2 ↗
26. Polipropileno Carregado com Microesferas Ocas de Vidro (Glass BubblesTM): Obtenção de Espuma Sintática10.1590/S0104-14282002000200013 ↗
27. Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine10.1016/j.matdes.2015.12.052 ↗
28. Silicon rubber/hollow glass microsphere composites: Influence of broken hollow glass microsphere on mechanical and thermal insulation property10.1016/j.compscitech.2013.02.015 ↗
29. Mechanical, thermal and rheological properties of hollow glass microsphere filled thermoplastic polyurethane composites blended by normal vane extruder10.1179/1743289815Y.0000000018 ↗
30. Hollow microspheres - poly-(propylene) blends: Relationship between microspheres degradation and composite properties10.1016/j.polymdegradstab.2014.12.024 ↗
31. Damping analysis of polyurethane/epoxy graft interpenetrating polymer network composites filled with short carbon fiber and micro hollow glass bead10.1016/j.matdes.2010.03.029 ↗
32. Yalcin B · 2015 · 35
33. Increased flow property of polycarbonate by adding hollow glass beads10.1002/pen.20382 ↗
34. Tensile properties of glass microballoon-epoxy resin syntactic foams10.1002/app.23548 ↗
35. Elastic and plastic properties of epoxy resin syntactic foams filled with hollow glass microspheres and glass fibers
36. Structural, thermal, mechanical and dynamic mechanical properties of cenosphere filled polypropylene composites10.1016/j.matdes.2010.08.041 ↗
37. Fracture and Impact Toughness of Syntactic Foam10.1177/0021955X04041960 ↗
38. Effects of reactive functional groups in the compatibilizer on mechanical properties of compatibilized blends10.1002/app.1994.070521204 ↗
39. Curing behavior and mechanical properties of hollow glass microsphere/bisphenol a dicyanate ester composites10.1002/app.32446 ↗
40. Processing, characterization, and erosion wear characteristics of borosilicate glass microspheres filled epoxy composites10.1002/pc.23079 ↗
41. Micromechanisms of crack propagation in hybrid-particulate composites10.1007/BF00723480 ↗
42. Fracture of glass bead/epoxy composites: on micro-mechanical deformations10.1016/S0032-3861(00)00187-7 ↗
43. Inorganic particle toughening I: micro-mechanical deformations in the fracture of glass bead filled epoxies10.1016/S0032-3861(00)00397-9 ↗
44. Inorganic particle toughening II: toughening mechanisms of glass bead filled epoxies10.1016/S0032-3861(00)00398-0 ↗
45. An Experimental Study on Toughening Mechanisms of Fillers in Epoxy/Silica Nanocomposites
46. The effect of particle-matrix adhesion on the mechanical behavior of glass filled epoxies. Part 2. A study on fracture toughness10.1016/S0032-3861(03)00372-0 ↗