An Investigation of Microstructural and Mechanical Behaviour of AA7050/Si3N4 Composites Fabricated Via Powder Metallurgy
Source abstract
Abstract
This experimental study investigates the microstructural characteristics, density, and mechanical properties of AA 7050 composites incorporating 5 and 15 wt.% Si3N4. These composites were fabricated using a powder metallurgy (P/M) process. The fabrication involved the mechanical milling of AA 7050 and Si3N4 composite powders, followed by a systematic blending, pressing, and sintering procedure. The sintered samples have been characterised using an optical microscope. The fabricated samples are subject to density analysis, Hardness, compressive strength, impact and tensile strength have been experimentally investigated. The optical microscope reveals a uniform distribution of Si3N4 particles and the increase in hardness of AS15 is 43.06% compared to the basic material A0. A 50.08% enhancement in the compressive strength of the AS15 composite compared to the basic material (A0). The AS15 composite exhibits a maximum tensile strength of 230.65 MPa compared to all fabricated alloys and composites. Conversely, the AS15 composite shows a decreased effect strength of up to 9.25J compared to all fabricated composites, attributed to the increased weight percentage of Si3N4, which contributes to crack formation at the particle-matrix interface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sri Sivasubramaniya Nadar College of Engineering, India
References (30)
Show source-provided references
1. Mechanical properties of a low-thermal-expansion aluminum/silicon composite produced by powder metallurgy10.1016/j.jmst.2013.11.003 ↗
2. Investigation of mechanical properties and microstructure of AA2024 and AA707510.4028/www.scientific.net/AMM.390.547 ↗
3. On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy10.1016/S0921-5093(03)00145-X ↗
4. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments
5. Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant10.1016/j.ceramint.2012.07.041 ↗
6. Production and some properties of Si3N4 reinforced aluminium alloy composites10.1016/j.jascer.2015.07.002 ↗
7. Highly dense Si3N4 crucibles used for Al casting: an investigation of the aluminum–ceramic interface at high temperatures10.1016/j.jmatprotec.2006.11.012 ↗
8. Processing and mechanical properties of 2024 aluminum matrix composites containing Tungsten and Tantalum prepared by PM10.1016/S1001-0521(08)60068-6 ↗
9. Study on formability and strain hardening index: influence of particle size of boron carbide (B4C) in magnesium matrix composites fabricated by powder metallurgy technique10.1088/2053-1591/ab6c0b ↗
10. Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing10.1016/j.powtec.2014.08.016 ↗
11. Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying10.1016/j.jallcom.2008.07.190 ↗
12. Microstructural and mechanical characterization in 7075 aluminum alloy reinforced by silver nanoparticles dispersion10.1016/j.jallcom.2009.10.209 ↗
13. Microwave sintering of aluminum- ZrB2 composite: focusing on microstructure and mechanical properties10.1590/1980-5373-MR-2015-0799 ↗
14. Characterization on aluminum alloy 7050 metal matrix composite reinforced with graphene nanoparticles10.1016/j.promfg.2019.02.018 ↗
15. Fabrication and mechanical behaviour of Al-Kaoline metal matrix composite fabricated through powder metallurgy technique
16. Hot deformation behavior and workability of in-situ TiB2/7050Al composites fabricated by powder metallurgy10.3390/ma13235319 ↗
17. Effect of Si3N4 ceramic particulates on mechanical, thermal, thermo-mechanical and sliding wear performance of AA2024 alloy composites10.1007/s12633-020-00810-w ↗
18. Effect of mechanical alloying process on mechanical properties of α-Si3N4 reinforced aluminum-based composite materials10.1016/j.matdes.2008.03.010 ↗
19. Effect of microwave sintering on the microstructure and mechanical properties of Al-Al2O3-Si3N4 hybrid composite fabricated by powder metallurgy techniques10.1177/09544062231159826 ↗
20. 1999
21. 1995
22. 1995
23. 2022
24. Investigation of microstructure and mechanical properties of aluminum hybrid nano-composites with the additions of solid lubricant10.1016/j.matdes.2013.04.015 ↗
25. Improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets (Al+ GNPs) using semi powder metallurgy method10.1016/j.jiec.2014.08.024 ↗
26. Improving properties of Mg with Al–Cu additions10.1016/j.matchar.2014.06.020 ↗
27. Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting10.1016/j.matdes.2005.01.006 ↗
28. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗
29. Kumar AJP · 2024 · 145
30. Microstructural characterization and mechanical behaviour of SiC and kaoline reinforced aluminium metal matrix composites fabricated through powder metallurgy technique10.1007/s12633-021-01154-9 ↗