journal article·2012-08-16Open access

Microstructural evolution of Ti-6Al-7Nb alloy during high pressure torsion

Tiago Santos Pinheiro, Juno Gallego, Claudemiro Bolfarini, Cláudio Shyinti Kiminami, Alberto Moreira Jorge Jr., Walter José Botta Filho

Materials Research· Volume 15· Issue 5

Abstract

Ti-6Al-7Nb alloys are being evaluated for biomedical applications, in substitution of the more conventional Ti-6Al-7V. Both types of alloys present a microstructure containing the α and the β phases, which result in good compromise for mechanical applications. In the present work Ti-6Al-7Nb alloys were processed by High Pressure Torsion (HPT), varying the number of revolutions and thus the total imposed strain. X-Ray Diffraction (XRD) results revealed the formation of different crystallographic textures in samples subjected to HPT. Microhardness distribution, across the diameters of the disks, is rather homogeneous for all samples, with higher values for those subjected to 03 and 05 turns. Transmission electron microscopy (TEM) micrographs have showed that an ultra-fine grained microstructure was obtained in all the samples.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Federal University of São Carlos, Brazil

São Paulo State University, Brazil

References (10)

Show source-provided references
1. Titanium alloys in total joint replacement: a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
3. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
4. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
5. Formation of metastable states in nanostructured Al-and Ti-based alloys by the SPTS technique10.1016/S0965-9773(99)00268-8 ↗
6. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
7. Microstructure and mechanical properties of titanium (Grade 4) processed by high-pressure torsion10.1016/j.msea.2007.08.084 ↗
8. Grain size and reversible beta-to-omega phase transformation in a Ti alloy10.1016/j.scriptamat.2010.05.045 ↗
9. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
10. Aging response of the Ni-Nb system biomaterials with β-stabilizing elements10.1016/j.matdes.2010.05.047 ↗