Normalizing effect on fatigue crack propagation at the heat-affected zone of AISI 4140 steel shielded metal arc weldings
Source abstract
Abstract
The fractography and mechanical behaviour of fatigue crack propagation in the heat-affected zone (HAZ) of AISI 4140 steel welded using the shielded metal arc process was analysed. Different austenitic grain size was obtained by normalizing performed at 1200 °C for 5 and 10 hours after welding. Three point bending fatigue tests on pre-cracked specimens along the HAZ revealed that coarse grains promoted an increase in fatigue crack growth rate, hence causing a reduction in both fracture toughness and critical crack length, and a transgranular brittle final fracture with an area fraction of dimple zones connecting cleavage facets. A fractographic analysis proved that as the normalizing time increased the crack length decreased. The increase in the river patterns on the fatigue crack propagation in zone II was also evidenced and final brittle fracture because of transgranular quasicleavage was observed. Larger grains induced a deterioration of the fatigue resistance of the HAZ.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Tecnológico de Tlalnepantla - ITTLA, México
Instituto Mexicano del Transporte
Corporación Mexicana de Investigación en Materiales - COMIMSA, México
References (17)
Show source-provided references
1. Schijve J · 2004
2. Courtney HT · 2000
3. Improving the range of grades of steel for bridge construction
4. González-Gutiérrez S · 2010 · 1
5. Fatigue crack grow mechanisms in steels10.1016/S0142-1123(03)00128-2 ↗
6. Fatigue crack growth behavior of the simulated HAZ of 800 MPa grade high performance steel10.1016/j.msea.2010.11.089 ↗
7. Mechanical properties and fatigue crack growth rate of laser-welded 4130 steel10.1016/0142-1123(92)90008-Z ↗
8. Effect of weld thermal cycle on microstructure and fracture toughness of simulated heat-affected zone for a 800 MPa grade high strength low alloy steel10.1016/j.jmatprotec.2007.12.049 ↗
9. Salazar-Garrido JA · 2008 · 97
10. Fracture Mechanism and Toughness of the Welding Heat-Affected Zone in Structural Steel under Static and Dynamic Loading10.1007/BF02830338 ↗
11. Effect of welding consumables on fatigue performance of shielded metal arc welded high strength, Q&T steel joints10.1007/s11665-008-9253-1 ↗
12. 2006 · 57
13. Chandler H · 2010 · 319
14. 2005 · 1
15. Effect of Notch Location on Fatigue Crack Growth Behavior of Strength-Mismatched High-Strength Low-Alloy Steel Weldments10.1361/10599490420566 ↗
16. 2005 · 15
17. The influence of microstructure on fatigue crack propagation behavior of stainless steel welds