Characterization of Ti6Al4V Alloy Produced by Laser-Powder Bed Fusion and Surface Modification Using Nanosecond Laser
Source abstract
Abstract
Ti alloys are widely used in severe corrosion environments where corrosion resistance is required, as biomedical industry. Additive manufacturing produces customized and complexes products. Laser texturing is a process of structuring surfaces using laser pulses, that allows the creation of periodic patterns on the surfaces of materials, to modify them, functionally and/or aesthetically, in a precise and direct way, allowing parameterization, versatility and repeatability. Consequently, bringing together metallic additive manufacturing with laser texturing process could be an alternative to obtain parts with functional hydrophilic surfaces, which improves osteointegration and reduces bacteria adhesion. Thus, the aim of this work is to characterize and evaluate the influence of LASER parameters in as-built additive manufactured potential biomedical components. Ti6Al4V specimens were produced by L-PBF, using Ytterbium LASER with maximum power of 500 W, varying the laser power from 61 W to 244 W. The samples were characterized by SEM, Microhardness, and wettability. After that, some specimens were Laser textured using an Ytterbium optical fiber laser, and then evaluated by SEM, wettability, and 3D roughness. It was possible to observe that the surface of all studied samples was flattened after Laser texturing in comparison with as-built condition, due to the melting of the powder particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Senai de Inovação em Manufatura Avançada e Microfabricação, Brasil; Instituto de Pesquisas Energéticas e Nucleares, Brasil
Instituto Senai de Inovação em Manufatura Avançada e Microfabricação, Brasil
Universidade de São Paulo, Brasil
Instituto de Pesquisas Energéticas e Nucleares, Brasil; Universidade Presbiteriana Mackenzie, Brasil
References (26)
Show source-provided references
1. Mechanical properties of Ti6Al4V fabricated by laser powder bed fusion: a review focused on the processing and microstructural parameters influence on the final properties10.3390/met12060986 ↗
2. Additive manufactured metallic implants for orthopaedic applications10.1007/s40843-017-9243-9 ↗
3. Scientometric review of trends on the mechanical properties of additive manufacturing and 3D printing10.1007/s11665-021-05524-7 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review10.1016/j.pmatsci.2008.06.004 ↗
5. The use of titanium for medical applications in the USA10.1016/0921-5093(96)10243-4 ↗
6. Surface texturing of aluminium alloy AA2024-T3 by picosecond laser: effect on wettability and corrosion properties10.1016/j.surfcoat.2017.04.056 ↗
7. A single-step fabrication approach for development of antimicrobial surfaces10.1016/j.jmatprotec.2019.04.012 ↗
8. Nanosecond laser ablated copper superhydrophobic surface with tunable ultrahigh adhesion and its renewability with low temperature annealing10.1016/j.apsusc.2017.10.143 ↗
9. Surface texturing by pulsed Nd:YAG laser10.1016/j.triboint.2009.06.003 ↗
10. Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque10.1016/j.jmbbm.2007.12.002 ↗
11. Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation10.1016/j.apsusc.2015.10.102 ↗
12. Santos RG · 2022
13. Oliveira RR · 2022
14. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting10.1016/j.matdes.2016.06.117 ↗
15. Selective laser melting of Ti6Al4V: effect of laser re-melting10.1016/j.msea.2020.140558 ↗
16. The microstructure transformation of selective laser melted Ti-6Al-4V alloy10.1016/j.mtcomm.2019.02.006 ↗
17. Microstructural evolution during post heat treatment of the Ti-6Al-4V alloy manufactured by laser powder bed fusion10.1016/j.jmrt.2023.01.123 ↗
18. Variant selection in laser powder bed fusion of non-spherical Ti-6Al-4V powder10.1016/j.jmst.2022.10.045 ↗
19. Balling processes during selective laser treatment of powders10.1108/13552540410526953 ↗
20. Effect of grooved titanium substratum on human osteoblastic cell growth10.1002/jbm.10101 ↗
21. Surface enhancement of Ti-6Al-4V fabricated by selective laser melting on bone-like apatite formation10.1016/j.jmrt.2022.06.135 ↗
22. Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: prospect development
23. The fabrication of titanium alloy biomedical implants using additive manufacturing: a way forward
24. Cellular responses to chemical and morphologic aspects of biomaterial surfaces. I. A novel in vitro model system10.1002/jbm.820290909 ↗
25. Attachment of fibroblasts on smooth and microgrooved polystyrene10.1002/(SICI)1097-4636(199908)46:2<212::AID-JBM10>3.0.CO;2-Y ↗
26. 2023