journal article·2025Open access

Torsional Fatigue of Ti15Mo Titanium Alloy

Wagner Pedro Hermes, Tatiane Haskel, Athos Henrique Plaine, Renato Barbieri

Materials Research· Volume 28

Abstract

This study investigates the torsional fatigue behavior of Ti-15Mo alloy through comprehensive analyses of its mechanical properties, microstructure, fatigue stress-life curves, and fracture surfaces, providing valuable insights into its fatigue characteristics. The hot-forged and air-cooled Ti15Mo alloy exhibited a microstructure predominantly consisting of equiaxial β phase grains, deformation twins, and ω athermal phase. Mechanical testing revealed a microhardness of 347.4 HV, yield and ultimate tensile strengths of 873 MPa, elongation of 20.7%, Young's modulus of 83.7 GPa, ultimate shear strength of 673 MPa, shear modulus of 30.5 GPa, and a fatigue strength limit of 190.2 MPa, as estimated by Basquin's model at 5 x 106 cycles. Fracture analysis indicated that crack nucleation predominantly occurred on the surface under pure torsion loading. In high-cycle fatigue (HCF) tests, cracks propagated at approximately 45° (Mode I), while in low-cycle fatigue (LCF) tests, propagation occurred at around 90° (Mode III). Fracture profiles also revealed significant number of deformation twins and instances of intragranular fracture near the fracture surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade do Estado de Santa Catarina, Brasil

Funding

FAPESC · CNPq

References (45)

Show source-provided references
1. Growth of α and ω phase in Ti4733 detected by mechanical spectroscopy10.1016/j.jallcom.2023.170228 ↗
2. Preparation of bulk Ti–15Mo alloy using cryogenic milling and spark plasma sintering10.1016/j.matchar.2020.110762 ↗
3. Strong and ductile beta Ti–18Zr–13Mo alloy with multimodal twinning10.1080/21663831.2019.1595763 ↗
4. Improving the mechanical properties of a β-type Ti-Nb-Zr-Fe-O alloy10.3390/met10111491 ↗
5. Influence of β-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys10.1016/j.micron.2020.102992 ↗
6. Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications10.1007/s12206-016-1214-2 ↗
7. Preparation and characterization of Ti-15Mo alloy used as biomaterial10.1590/S1516-14392011005000013 ↗
8. In-situ tailoring mechanical properties of metastable Ti15Mo alloy produced by selective laser
9. New Ti–Mo–Si materials for bone prosthesis applications10.1016/j.jmbbm.2020.104198 ↗
10. The anisotropic of corrosion and tribocorrosion behaviors of Ti–15Mo alloy fabricated by selective laser melting10.1016/j.matchar.2022.112000 ↗
11. Observation of the omega phase particles in Ti15Mo alloy by electron microscopy10.1016/j.matlet.2021.131376 ↗
12. Room temperature aging behavior of Ti–Nb–Mo-based superelastic alloys10.1016/j.actamat.2011.12.033 ↗
13. Comparison of fatigue strengths of biocompatible Ti-15Zr-4Nb-4Ta alloy and other titanium materials10.1016/j.msec.2010.09.015 ↗
14. Recent development of low-cost β-Ti alloys for biomedical applications: a review10.3390/met13020194 ↗
15. Fatigue behavior and fracture features of Ti-15Mo alloy in β-, (α + β)-, and ultrafine-grained two- phase states10.3390/met13030580 ↗
16. The role of twinning and nano-crystalline ω phase on the fatigue behavior of the metastable β Ti-15Mo alloy10.1016/j.msea.2018.05.069 ↗
17. A microstructural study of fatigue fracture in titanium-molybdenum alloys10.1016/S0921-5093(97)00795-8 ↗
18. Hermes WP · 2022
19. 2021
20. 2021
21. 2020
22. 1983
23. 2015
24. Freitas MCRS · 2005
25. Observation of the omega phase particles in Ti15Mo alloy by electron microscopy10.1016/j.matlet.2021.131376 ↗
26. Sequence of phase transformations in metastable β Zre12Nb alloy studied in situ by HEXRD and complementary techniques10.1016/j.jmrt.2023.02.076 ↗
27. Nag S · 2008
28. Araújo RO · 2017
29. Mechanism of twinning-induced plasticity in β -type Ti–15Mo alloy10.1016/j.scriptamat.2013.05.027 ↗
30. Dieter GE · 1986
31. Effect of artificial aging time on torsional fatigue life and cyclic behavior of AA6351 aluminum alloy and evaluation of estimation methods10.1111/ffe.14051 ↗
32. Effects of strontium addition and T6 heat treatment on uniaxial fatigue of A356 alminum alloy: fatigue life and cyclic behavior10.1111/ffe.13721 ↗
33. Deformation and HCF behavior of A356 aluminum alloys in torsion10.1088/2053-1591/ab4f31 ↗
34. A new function for fatigue curves characterization and its multiple merits10.1016/S0142-1123(00)00082-7 ↗
35. Boyer RR · 1994
36. Meggiolaro MA · 2009 · 365
37. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
38. Evaluation of estimation methods for shear fatigue properties and correlations with uniaxial fatigue properties for steels and titanium alloys10.1051/matecconf/201816516012 ↗
39. Comparison of crack paths in a forged and extruded aeronautical titanium alloy loaded in torsion in the gigacycle fatigue regime10.1016/j.engfracmech.2016.05.013 ↗
40. Lee YL · 2005
41. Rotating and bending fatigue behavior of A356 aluminum alloy: effects of strontium addition and T6 heat treatment10.1016/j.ijfatigue.2018.04.012 ↗
42. Torsion fatigue behavior of pure titanium with a gradient nanostructured surface layer10.1016/j.msea.2015.09.104 ↗
43. In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration10.1016/j.jmst.2020.04.078 ↗
44. Failure analysis of surgical implants in Brazil: the need for adequate regulation
45. Campbell FC · 2012