journal article·2018-06-11Open access

Rheo-Squeeze Casting of High-Silicon Aluminium Alloy Pipes with Gradient Structures and Their Mechanical Properties

Lu Li, Baoyu Geng, Qiuping Wang, Rongfeng Zhou, Yehua Jiang

Materials Research· Volume 21· Issue 4

Abstract

Three different compositions of high-Si Al alloy pipe, with a gradient structure, were produced through semi-solid rheological squeeze casting, the microstructural characteristics of which were investigated. The mechanism of gradient structure formation and the effect of acicular Fe-rich phases on liquid segregation were revealed. Meanwhile, the crystal structures of the Al4FeSi2 and Al15(Fe, Mn)3Si2 phase were elucidated. The relationship between the volume fraction of hard particles in the pipe wall and the macro-hardness was established. Wear resistance tests of the inner surfaces of the pipe walls, and tensile strength tests at different positions around the pipe walls, showed that the δ-Al4FeSi2 phase (acicular Fe-rich phases) reduced the wear resistance and the tensile strength of the alloy. In this study, the gradient distribution of the hard particles caused the outside of the pipe wall to have a higher tensile strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Kunming University of Science and Technology, China

References (15)

Show source-provided references
1. Microstructural evolution and high temperature flow behaviors of a homogenized Sr-modified Al-Si-Mg alloy10.1016/j.jallcom.2017.12.278 ↗
2. Influence of Modifying Mixtures on Si Crystal Formation in Al-7%Si Alloy10.3390/met8020098 ↗
3. Hypereutectic Al-Si Alloys: Practical Casting Considerations10.1007/BF03355450 ↗
4. The Influence of the Al-Ti-B/Al-Sr Modification on the Microstructure and Properties of the Hypereutectic Al-Si Alloy in Automotive Piston10.4028/www.scientific.net/AMR.744.339 ↗
5. Spray forming of hypereutectic Al-Si alloys10.1016/j.jmatprotec.2009.03.009 ↗
6. New Wear Resistant Hypereutectic AlSi14Cu4FeCrMn Alloys for High Pressure Die Casting10.1007/BF03356040 ↗
7. Effects of ultrasonic vibration and manganese on microstructure and mechanical properties of hypereutectic Al-Si alloys with 2% Fe10.1016/j.intermet.2012.09.001 ↗
8. Effect of Cr and Mn on the microstructure of spray-formed Al-25Si-5Fe-3Cu alloy10.1016/j.msea.2011.02.029 ↗
9. Manufacturing technique and application of high-silicon aluminium alloy cylinder sleeve/cylinder
10. Coating Bores of Light Metal Engine Blocks with a Nanocomposite Material using the Plasma Transferred Wire Arc Thermal Spray Process10.1007/s11666-008-9188-y ↗
11. Characterization of a Functionally Graded Hypereutectic Al-Si Alloy Produced by Centrifugal Method10.4028/www.scientific.net/AMR.47-50.865 ↗
12. Formation of the High Chromium White Iron Parts with Gradient Structure Via Semi-Solid Metal Extrusion
13. Nafisi S · 2016 · 296
14. Effect of cooling slope and manganese on the microstructure of hypereutectic Al-Si alloy with 2% Fe
15. Prediction of rheological behaviour and segregation susceptibility of semi-solid aluminium-silicon alloys by a simple back extrusion test10.1016/j.actamat.2005.08.014 ↗