Properties and microstructure regulation of electrodeposited ultra-thin copper foil in a simple additive system
Source abstract
Abstract
Abstract Hydroxyethyl cellulose (HEC) has been commonly used in a variety of complex formulations for acid copper plating. However, the roles of HEC acting in acid copper plating still lacks of systematic investigation. To explore the efficacy of HEC in the deposition of the ultra-thin electrodeposited copper foil (ED-Cu), we designed a simple formulation system, in which HEC was used as the single organic additive. Using electron backscatter diffraction (EBSD), microstructures of the prepared ED-Cu was comprehensively investigated. The results showed that the ED-Cu was characterized by a mixed distribution of columnar and equiaxed crystals. Grain morphology, dislocation density and crystal orientation of the ED-Cu could be regulated by HEC concentration. According to the cyclic voltammetry (CV) and chronoamperometry (CA) results, the introduction of HEC between 0–200 ppm led to a polarizing effect, which marginally increased with the HEC concentration. Meanwhile, the increase of HEC concentration enhanced the nucleation rates of copper and reduced the grain size during instantaneous nucleation. The introduction of the HEC also altered the preferred orientation of the ED-Cu foil. Mechanical results showed that the optimum concentration of HEC addition was 125 mg l−1.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Light-weighting of battery casing for lithium-ion device energy density improvement10.1016/j.est.2023.107852 ↗
2. Design and optimization of lithium-ion battery as an efficient energy storage device for electric vehicles: a comprehensive review10.1016/j.est.2023.108033 ↗
3. Metallized plastic foils: a promising solution for high-energy lithium-ion battery current collectors10.1002/aenm.202302134 ↗
4. A review on structuralized current collectors for high-performance lithium-ion battery anodes10.1016/j.apenergy.2020.115464 ↗
5. Preparing ultra-thin copper foil as current collector for improving the LIBs performances with reduced carbon footprint10.1016/j.mtcomm.2023.105952 ↗
6. High-performance lithium-ion batteries with 1.5 μm thin copper nanowire foil as a current collector10.1016/j.jpowsour.2017.02.041 ↗
7. Effect of electroplating current density on tensile properties of nanotwinned copper foils10.1149/1945-7111/ac62be ↗
8. Effect of copper ion concentration on microstructure and mechanical properties of electrolytic copper foil10.1088/1757-899X/381/1/012166 ↗
9. Examination of copper electrowinning smoothing agents. Part III. Chloride interaction with HydroStar and cyquest N-90010.19150/mmp.6466 ↗
10. The effect of chloride ion in the electrowinning of copper10.1007/BF00615534 ↗
11. The effect of additives and current density on mechanical properties of cathode metal for secondary battery10.1007/s13391-013-0039-8 ↗
12. High-strength copper foil prepared with 2-mercaptothiazoline by direct current electrodeposition10.1016/j.electacta.2023.143068 ↗
13. Effects of DPS on surface roughness and mechanical properties of electrodeposited copper foils10.1002/crat.202200260 ↗
14. Trace bis-(3-sulfopropyl)-disulfide enhanced electrodeposited copper foils10.1016/j.jmst.2020.10.019 ↗
15. Synergistic effects of gelatin and convection on copper foil electrodeposition10.1016/j.electacta.2016.06.051 ↗
16. The adsorption structure of polyethylene imine on copper surfaces for electrodeposition10.1002/pssr.202100351 ↗
17. Modeling the charge-transfer resistance to determine the role of guar and activated polyacrylamide in copper electrodeposition10.1149/1.3176879 ↗
18. Revealing the inhibition effect of quaternary ammonium cations on Cu electrodeposition10.1007/s10800-019-01381-4 ↗
19. Effects of 2-mercaptopyridine and Janus Green B as levelers on electrical resistance of electrodeposited copper thin film for interconnects10.1016/j.tsf.2019.03.012 ↗
20. Temperature-dependent inhibition of PEG in acid copper plating: theoretical analysis and experiment evidence10.1016/j.mtcomm.2020.100973 ↗
21. Effect of the ionic strength and the electrolyte composition on the suppression of copper deposition by PEG10.1149/1.3335493 ↗
22. Decomposition of polyethylene glycol (PEG) at Cu cathode and insoluble anode during Cu electrodeposition10.1016/j.electacta.2020.136803 ↗
23. Experimental analysis of pinholes on electrolytic copper foil and their prevention10.1016/j.engfailanal.2012.02.007 ↗
24. Improvement of performance stability of electrolytic copper foils by bi-component additives10.1007/s10800-022-01707-9 ↗
25. A novel strategy to electrodeposit high-quality copper foils using composite additive and pulse superimposed on direct current10.1007/s10800-020-01509-x ↗
26. A review on grafting of hydroxyethylcellulose for versatile applications10.1016/j.ijbiomac.2020.01.265 ↗
27. Hydroxyethylcellulose used as an eco-friendly inhibitor for 1018 c-steel corrosion in 3.5% NaCl solution10.1016/j.carbpol.2014.06.032 ↗
28. Adsorption and corrosion inhibition behavior of hydroxyethyl cellulose and synergistic surfactants additives for carbon steel in 1M HCl10.1016/j.carbpol.2016.08.066 ↗
29. Experimental study of electrolytic copper foil process conditions and its additives
30. Effects of additives and convection on Cu foil fabrication with a low surface roughness10.1149/2.0101712jes ↗
31. Current transition of nucleation and growth under diffusion-controlled electrocrystallization: a brief review10.3390/coatings12081195 ↗
32. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
33. Size refinement of copper nanoparticles: a perspective from electrochemical nucleation and growth mechanism10.1002/celc.202001534 ↗
34. The optimization of bimetallic electrodes’ sensitivity using copper nucleation on metallic substrates to detect nitrates in seawater10.1016/j.jelechem.2022.116497 ↗
35. Modeling of the coadsorption of chloride and hydrogen ions on copper electrode surface10.1149/2.0061901jes ↗
36. Relationship between hardness and grain size in electrodeposited copper films10.1016/j.msea.2006.12.101 ↗