journal article·2022-04-01Open access

Study on corrosion characteristics of Q235 steel in seawater, soil and dry-wet alternating environments focusing on Shengli oilfield

Chao Yang, Zeng-lin Wang, Guan-jun Wang, Qing Han, Jin Liu

Materials Research Express· Volume 9· Issue 4

Abstract

Abstract The coastal pipelines are the key link between the offshore and the onshore pipelines, which are located in the soil dry-wet alternating environment. Even though higher corrosion risk of metals in coastal soil dry-wet alternating environment, few papers focused on this condition, while much research about ocean and atmospheric dry-wet alternating environment was paid attention to. In this paper, a self-designed soil dry-wet alternating experimental device was used to investigate the corrosion characteristics of Q235 steel in seawater, soil and dry-wet alternating environment based on mass loss experiments, corrosion morphology analysis and electrochemical experiments. The results showed that the general corrosion rate of Q235 steel in soil and seawater environments basically remained unchanged, and in dry-wet alternating environment increased with time, while the pitting rates were 0.280 mm/a (soil), 0.420 mm/a (seawater) and 0.567 mm/a (dry-wet alternation), respectively, which was caused by the oxygen concentration cell and salt concentration cell. Meanwhile, the growth rate of pitting size in dry-wet alternating environment was much higher than that in the other two environments with different corrosion characteristics of pitting corrosion (seawater and dry-wet alternation) and a changed from general corrosion to pitting corrosion (soil). In three environments, the corrosion current density (I corr) increased, in which on the 30th day of experiment, I corr = 79.72 μA cm−2 in dry-wet alternating environment, which was much higher than I corr = 47.89 μA cm−2 in seawater environment. In dry-wet alternating environment, the mass diffusion impedance at 10–2 Hz and the maximum phase angle changed significantly, while the logf-log∣Z∣ curve in low-middle frequency decreased significantly, and charge transfer resistance at 105 Hz reduced from 10.4 Ω to 4.3 Ω, illustrating an increasing corrosion rate.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Structural Integrity and Reliability Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Insight into the corrosion evolution of Fe-based amorphous coatings under wet-dry cyclic conditions10.1016/j.electacta.2019.07.058 ↗
2. Experimental investigation on the corrosion and corrosion fatigue behavior of butt weld with G20Mn5QT cast steel and Q355D steel under dry–wet cycle [J]10.1016/j.engfailanal.2021.105977 ↗
3. Study of pitting corrosion on mild steel during wet–dry cycles by electrochemical noise analysis based on chaos theory10.1016/j.corsci.2012.09.017 ↗
4. Effect of dissolved oxygen concentration on stress corrosion cracking behavior of pre-corroded X100 steel base metal and the welded joint in wet–dry cycle conditions10.1016/j.jngse.2020.103264 ↗
5. Stress corrosion cracking behavior of rusted X100 steel under the combined action of Cl- and HSO3 - in a wet–dry cycle environment [J]10.1016/j.corsci.2019.108382 ↗
6. Electrochemical studies on corrosion under a water film [J]10.1016/0921-5093(95)80071-2 ↗
7. An electrochemical impedance study on atmospheric corrosion of steels in a cyclic wet-dry condition10.1016/0010-938X(95)00104-R ↗
8. Corrosion behavior of X65 pipeline steel: Comparison of wet–Dry cycle and full immersion10.1016/j.corsci.2018.01.007 ↗
9. Effect of Cl- and rust layer on stress corrosion cracking behavior of X100 steel base metal and heat-affected zone in marine alternating wet/dry environment10.1016/j.matchemphys.2021.124826 ↗
10. Deterioration of the bond behavior between CFRP and corroded steel in wet-dry cycling environment10.1016/j.compstruct.2021.114202 ↗
11. Cyclic contact fatigue of cemented carbides under dry and wet conditions: Correlation between microstructure, damage and electrochemical behavior10.1016/j.ijrmhm.2020.105279 ↗
12. Environmental embrittlement of automobile spring steels caused by wet–dry cyclic corrosion in sodium chloride solution10.1016/j.corsci.2004.10.008 ↗
13. Pitting corrosion mechanism of stainless steels under wet-dry exposure in chloride-containing environments .10.1016/S0010-938X(97)00124-8 ↗
14. Influence of the degree of saturation on carbon steel corrosion in soil [J]10.1016/j.corsci.2021.109568 ↗
15. Accelerating role of microbial film on soil corrosion of pipeline steel10.1016/j.ijpvp.2021.104395 ↗
16. Influence of corrosion and surface roughness on wettability of ASTM A36 steels10.1016/j.jcsr.2018.01.023 ↗
17. Lost iron and iron converted into rust in steels Unpublished to dry–wet corrosion process10.1016/j.corsci.2007.09.003 ↗
18. The effect of electrode surface area on corrosion initiation monitoring of X65 steel in soil10.1016/j.corsci.2019.03.019 ↗
19. On the optimum soil moisture for underground corrosion in different soil types10.1016/j.corsci.2019.108116 ↗
20. Pitting corrosion modelling of X80 steel utilized in offshore petroleum pipelines10.1016/j.psep.2020.05.024 ↗
21. Insight into atmospheric corrosion evolution of mild steel in a simulated coastal atmosphere10.1016/j.jmst.2020.11.021 ↗
22. Bi-modal trending for corrosion loss of steels buried in soils [J]10.1016/j.corsci.2018.03.048 ↗
23. Intergranular stress corrosion cracking of steel gas pipelines in weak alkaline soil electrolytes10.1016/j.engfailanal.2018.07.036 ↗
24. Electrochemical impedance study on galvanized steel corrosion under cyclic wet-dry conditions - influence of time of wetness10.1016/S0010-938X(03)00130-6 ↗
25. On the corrosion behaviour of novel high carbon rail steels in simulated cyclic wet–dry salt fog conditions10.1016/j.corsci.2008.02.021 ↗
26. The effect of relative humidity change on atmospheric pitting corrosion of stainless steel 304L10.1016/j.corsci.2019.01.033 ↗
27. Full-scale fatigue simulation of the deterioration mechanism of reinforced concrete road bridge slabs under dry and wet conditions10.1016/j.engstruct.2021.112988 ↗
28. Field experiment of stress corrosion cracking behavior of high strength pipeline steels in typical soil environments10.1016/j.conbuildmat.2017.05.058 ↗
29. Electrochemical corrosion monitoring of galvanized steel under cyclic wet–dry conditions10.1016/S0010-938X(99)00057-8 ↗
30. AE monitoring of corrosion process in cyclic wet–dry test10.1016/j.conbuildmat.2010.05.006 ↗
31. Corrosion behaviour of weathering steel in diluted Qinghai salt lake water in a laboratory accelerated test that involved cyclic wet/dry conditions.10.1016/j.matchemphys.2010.07.069 ↗
32. Numerical simulations of soil physicochemistry and aeration influences on the external corrosion and cathodic protection design of buried pipeline steels10.1016/j.matdes.2016.02.089 ↗
33. Electrochemical investigation on steel corrosion in iron-rich clay10.1016/j.corsci.2015.04.013 ↗
34. Influence of soil moisture on the corrosion processes of carbon steel in artificial soil: Active area and differential aeration cells10.1016/j.electacta.2016.07.163 ↗
35. Simulated corrosion test of Q235 steel in diatomite soil10.1016/S1006-706X(15)30011-X ↗
36. Measuring changes in wettability and surface area during micro droplet corrosion measurements10.1016/j.electacta.2021.139402 ↗
37. Comparison of the rusting behaviors of S450EW weathering steel under continuous spray and wet/dry cycling10.1016/j.conbuildmat.2021.125211 ↗
38. The corrosion behavior of steel exposed to a DC electric field in the simulated wet-dry cyclic environment10.1016/j.matchemphys.2017.01.057 ↗
39. Microstructure and corrosion behavior of S32101 stainless steel underwater dry and wet welded joints10.1016/j.jmatprotec.2018.02.018 ↗
40. Atmospheric corrosion monitoring of a weathering steel under an electrolyte film in cyclic wet–dry condition10.1016/j.corsci.2013.09.008 ↗
41. Electrochemical characterization and stress corrosion cracking of E690 high strength steel in wet-dry cyclic marine environments10.1016/j.msea.2017.10.042 ↗