journal article·2023-09-01Open access

Effect of varying molarity and curing conditions on the mechanical and microstructural characteristics of alkali activated GGBS binder

Tamilarasan A, Suganya OM

Materials Research Express· Volume 10· Issue 9

Abstract

Abstract Geopolymer binder offers a more sustainable choice for producing concrete in comparison to traditional ordinary Portland cement (OPC). The substitution of geopolymer binder for construction practices can decrease carbon dioxide emissions by decreasing OPC usage and repurposing industrial waste materials like ground granulated blast furnace slag (GGBS), fly ash, red mud, silica fume. In order to assess the suitability of GGBS as a binding material, it is essential to conduct conventional tests like consistency, setting times, and compressive strength, which are widely employed in cement testing. This study produced alkali activated paste (AAP) from GGBS and an alkaline activator comprising sodium hydroxide at various molarities from 1 M to 8 M. This investigation focused on the compressive strength of alkali-activated GGBS-based AAP under varying alkali activation molarities and curing conditions, including ambient, hot air oven, and humidity chamber curing. Additionally, the end reaction products of AAP showing higher compressive strength were examined for scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis. The experimental outcomes indicated that GGBS reduced the final setting time of AAP while increasing its compressive strength. Additionally, increasing the quantity of NaOH in the AAP increased its compressive strength. Furthermore, the research findings indicated that the mechanical properties of the alkali-activated GGBS-based material were notably influenced by the chosen curing conditions. Specifically, ambient curing demonstrated superior compressive strength, measuring at 47.06 MPa after 28 days, surpassing the results obtained from hot air oven curing and humidity curing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A state-of-the-art review of crushed urban waste glass used in OPC and AAMs (geopolymer): progress and challenges10.1016/j.clema.2022.100083 ↗
2. Effect of curing condition on the mechanical properties of fly ash-based geopolymer concrete10.1007/s42452-019-1774-8 ↗
3. Potential utilization of waste glass powder as a precursor material in synthesizing ecofriendly ternary blended geopolymer matrix10.1016/j.jclepro.2022.131860 ↗
4. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
5. Investigation on the effect of ultra fine rice husk flashover slag based geopolymer concrete10.17515/resm2022.501ma0814 ↗
6. A neural network-based prediction of superplasticizers effect on the workability and compressive characteristics of portland pozzolana cement-based mortars10.1155/2023/2605414 ↗
7. Development of high performance sustainable optimized fiber reinforced geopolymer concrete and prediction of compressive strength10.1016/j.jclepro.2020.124543 ↗
8. A review on the effect of silica to alumina ratio, alkaline solution to binder ratio, calcium oxide + ferric oxide, molar concentration of sodium hydroxide and sodium silicate to sodium hydroxide ratio on the compressive strength of geopolymer concrete10.1007/s12633-021-01130-3 ↗
9. Influence of waste glass powder as an aluminosilicate precursor in synthesizing ternary blended alkali-activated binder10.1007/s12633-021-01533-2 ↗
10. Durability Studies on Fly Ash Based Geopolymer Concrete Incorporated with Slag and Alkali Solutions10.1155/2022/7196446 ↗
11. A critical review of waste glass powder as an aluminosilicate source material for sustainable geopolymer concrete production10.1007/s12633-020-00929-w ↗
12. Incorporation of silica fumes and waste glass powder on concrete properties containing crumb rubber as a partial replacement of fine aggregates10.3390/su142114453 ↗
13. The potential use of waste glass powder in slag based geopolymer concrete-An environmental friendly material10.1504/IJEWM.2023.130723 ↗
14. Mechanical performance, microstructure, and porosity evolution of fly ash geopolymer after ten years of curing age.10.3390/ma16031096 ↗
15. An artificial neural network based prediction of mechanical and durability characteristics of sustainable geopolymer composite10.1155/2022/9343330 ↗
16. Prediction of self-healing characteristics of GGBS admixed concrete using artificial neural network10.1088/1742-6596/1716/1/012019 ↗
17. Pozzolanic properties of agro waste ashes for potential cement replacement predicted using ANN10.1088/1742-6596/1716/1/012018 ↗
18. Assessment of CO 2 reduction of alkali-activated concrete10.1016/j.jclepro.2012.08.001 ↗
19. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste10.1016/j.cemconcomp.2013.09.012 ↗
20. Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder10.1016/j.cemconcomp.2010.03.007 ↗
21. Final Setting Time and Compressive Strength of Fly Ash and GGBS-Based Geopolymer Paste and Mortar10.1007/s13369-015-1757-z ↗
22. Fresh and hardened properties of fly ash–slag blended geopolymer paste and mortar10.1186/s40069-019-0360-1 ↗
23. Effect of alkali activator on the standard consistency and setting times of fly ash and GGBS-based sustainable geopolymer pastes10.1155/2020/2593207 ↗
24. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
25. Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar10.1016/j.conbuildmat.2014.09.021 ↗
26. Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash10.1016/j.conbuildmat.2016.08.153 ↗
27. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
28. Optimization of the design parameters of fly ash-based geopolymer using the dynamic approach of the taguchi method10.1016/j.conbuildmat.2019.05.177 ↗
29.
30. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
31. Development of geopolymer mortar under ambient temperature for in situ applications10.1016/j.conbuildmat.2016.05.085 ↗
32. Development of various curing effect of nominal strength Geopolymer concrete10.25103/jestr.071.19 ↗
33. ASTM C109/C109M-16a 2016 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). Annual Book of ASTM Standards.
34. ASTM C 348 – 08 2021 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. Annual Book of ASTM Standards.
35. Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature10.1016/j.conbuildmat.2018.04.008 ↗
36. Setting time and 7-day strength of geopolymer mortar with various binders10.1016/j.conbuildmat.2018.08.025 ↗
37. The engineering properties and microstructure development of cement mortar containing high volume of inter-grinded GGBS and PFA cured at ambient temperature10.1016/j.conbuildmat.2016.06.105 ↗
38. Study on the optimum initial curing condition for fly ash and GGBS based geopolymer recycled aggregate concrete10.1016/j.conbuildmat.2020.118540 ↗
39. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
40. An investigation into the thermo-physical, mechanical, and microstructural properties of cement mortar incorporating hybrid waste slags10.1007/s40999-020-00554-z ↗
41. Influence of activator solution on microstructural and mechanical properties of geopolymer concrete10.1016/j.mtla.2020.100659 ↗
42. Stoichiometrically controlled C-(A)-S-H/N-A-S-H gel blends via alkali activation of synthetic precursors10.1179/1743676115Y.0000000057 ↗
43. Effect of graphene oxide on the microstructure and hydration characteristics of ultrafine slag cement composites Fullerenes10.1080/1536383X.2022.2068529 ↗
44. Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash10.1016/j.jclepro.2017.11.125 ↗
45. Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature10.1016/j.jclepro.2019.119610 ↗