journal article·2026-06-26Open access

Interfacial engineering for high-strength, high-conductivity copper/graphene composites by combined CVD and sputtering

Yicheng Wang, Yong Liu, Yajing Liu, Xiaohong Chen, Ping Liu

Materials Research Express· Volume 13· Issue 12

Abstract

Abstract Copper is a fundamental material used in energy and electronic systems. However, achieving a balance between strength and conductivity in existing materials remains challenging, and Joule heating loss under high current restricts the development of high-power equipment. Therefore, it is crucial to develop new copper-based materials with high strength and high conductivity. Graphene is regarded as an ideal reinforcement material for constructing high-performance copper-based composites, owing to its excellent intrinsic properties. In this study, an innovative preparation strategy was proposed: high-quality graphene was grown in situ on copper foil by chemical vapor deposition, and a copper nanofilm was deposited by magnetron sputtering to construct a copper/graphene/copper composite sandwich structure, followed by densification via hot-press sintering. The results demonstrated a synergistic improvement in the electrical and mechanical properties of the composite: the conductivity reached 105.27% International Annealed Copper Standard, and the tensile strength was 240.32 MPa, both significantly better than those of pure copper. This study confirms that the material properties can be simultaneously optimized through precise interface and structural engineering, providing a new technical approach for developing efficient conductive materials for energy and electronic applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Aluminum Alloys Composites Properties · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Shanghai for Science and Technology

Funding

National Natural Science Foundation of China

References (45)

Show source-provided references
1. Novel synthesizing and characterization of copper matrix composites reinforced with carbon nanotubes10.1016/j.msea.2017.04.055 ↗
2. Paradigm of state-of-the-art CNT reinforced copper metal matrix composites: processing, characterizations, and applications10.1016/j.jmrt.2023.05.083 ↗
3. Direct synthesis of carbon nanotube-graphene hybrids on copper powders and the mechanical properties of corresponding composites10.1016/j.msea.2021.141861 ↗
4. Preparation of CNTs/Cu composites with good electrical conductivity and excellent mechanical properties10.1016/j.msea.2019.138656 ↗
5. Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs10.1016/j.carbon.2021.09.040 ↗
6. Low-friction, wear-resistant, and electrically homogeneous multilayer graphene grown by chemical vapor deposition on molybdenum10.1016/j.apsusc.2019.144792 ↗
7. Thermal properties of in situ grown graphene reinforced copper matrix laminated composites10.1016/j.jallcom.2018.08.274 ↗
8. Preparation of graphene nanoplatelets reinforcing copper matrix composites by electrochemical deposition10.1016/j.jallcom.2018.06.309 ↗
9. An internal-oxidation-based strategy induced high-density alumina in-situ nanoprecipitation and carbon nanotube interface optimization for co-reinforcing copper matrix composites10.1016/j.compositesb.2021.109455 ↗
10. Greatly enhanced anticorrosion of Cu by commensurate graphene coating10.1002/adma.201702944 ↗
11. Microstructure and properties of graphene oxide reinforced copper-matrix composite foils fabricated by ultrasonic assisted electrodeposition10.1016/j.msea.2023.144995 ↗
12. Ultrahigh electrical conductivity of graphene embedded in metals10.1002/adfm.201806792 ↗
13. Defects induced the bilayer graphene-copper hybrid and its effect on mechanical properties of graphene reinforced copper matrix composites10.1016/j.apsusc.2023.158762 ↗
14. High-performance graphene flexible sensors for pulse monitoring and human–machine interaction10.1021/acsami.4c06546 ↗
15. Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites10.1016/j.jallcom.2016.08.303 ↗
16. High strength and conductivity copper/graphene composites prepared by severe plastic deformation of graphene coated copper powder10.1016/j.msea.2021.141983 ↗
17. A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites10.1038/s41467-020-16490-4 ↗
18. Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids10.1016/j.carbon.2019.02.048 ↗
19. Effect of rare metal element interfacial modulation in graphene/Cu composite with high strength, high ductility and good electrical conductivity10.1016/j.apsusc.2020.147489 ↗
20. An efficient way to produce a nano composites of pure copper reinforced by carbon nano tubes carboxylic10.1016/j.jmrt.2019.06.040 ↗
21. Large-area synthesis of high-quality and uniform graphene films on copper foils10.1126/science.1171245 ↗
22. Improving strength and high electrical conductivity of multi-walled carbon nanotubes/copper composites fabricated by electrodeposition and powder metallurgy10.1016/j.jallcom.2017.11.200 ↗
23. In-situ generated graphene from wheat flour for enhancing mechanical and electrical properties of copper matrix composites10.1016/j.msea.2022.142662 ↗
24. Ultrafast epitaxial growth of metre-sized single-crystal graphene on industrial Cu foil10.1016/j.scib.2017.07.005 ↗
25. Oxidation resistance of iron and copper foils coated with reduced graphene oxide multilayers10.1021/nn3017316 ↗
26. Energetic bombardment and defect generation during magnetron-sputter-deposition of metal layers on graphene10.1016/j.apsusc.2021.150661 ↗
27. An electrochemically neutralized energy-assisted low-cost acid-alkaline electrolyzer for energy-saving electrolysis hydrogen generation10.1039/C7TA10374C ↗
28. Enhanced graphene mechanical properties through ultrasmooth copper growth substrates10.1021/acs.nanolett.5b04531 ↗
29. Growth of adlayer graphene on cu studied by carbon isotope labeling10.1021/nl303879k ↗
30. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
31. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
32. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
33. Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm10.1016/j.scriptamat.2020.06.051 ↗
34. Residual stress measurement in textured thin film by grazing-incidence x-ray diffraction10.1016/S0040-6090(02)00680-6 ↗
35. Cu2O thin films deposited by reactive direct current magnetron sputtering10.1016/j.tsf.2009.02.127 ↗
36. Direct measurement of adhesion energy of monolayer graphene as-grown on copper and its application to renewable transfer process10.1021/nl204123h ↗
37. Quantifying ion-induced defects and Raman relaxation length in graphene10.1016/j.carbon.2009.12.057 ↗
38. From point defects in graphene to two-dimensional amorphous carbon10.1103/PhysRevLett.106.105505 ↗
39. Characterization of crystallinity and graphene morphology on annealed copper foils: enhancing electrical properties in copper/graphene composite10.1016/j.matchar.2025.115366 ↗
40. Mechanism of metal intercalation under graphene through small vacancy defects10.1021/acs.jpcc.1c00814 ↗
41. High oxidation resistance of CVD graphene-reinforced copper matrix composites10.3390/nano9040498 ↗
42. Significantly improved thickness uniformity of graphene monolayers grown by chemical vapor deposition by texture and morphology control of the copper foil substrate10.1016/j.carbon.2016.01.032 ↗
43. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite10.1021/acsnano.5b01067 ↗
44. Kinetics of dislocation cross-slip: a molecular dynamics study10.1016/j.commatsci.2017.06.039 ↗
45. Direct synthesis of high-quality graphene on Cu powders from adsorption of small aromatic hydrocarbons: a route to high strength and electrical conductivity for graphene/Cu composite10.1016/j.jallcom.2019.05.273 ↗