journal article·2020-01-01Open access

A comparative study of dry sliding wear behaviour of sillimanite and rutile reinforced LM27 aluminium alloy composites

Rahul Gupta, Sandeep Sharma, Tarun Nanda, O P Pandey

Materials Research Express· Volume 7· Issue 1

Abstract

Abstract The present work compares the dry sliding wear characteristics of sillimanite reinforced and rutile reinforced LM27 aluminium alloy based composites prepared by stir casting process. Particles in the size range of 1–32 μm were added in 5, 10, and 15 wt%. Microstructure, nanohardness, coefficient of friction, and wear rate characteristics were evaluated. Optical microscopy revealed uniform distribution of both sillimanite and rutile particles in the matrix. The hardness of sillimanite reinforced composites was higher than rutile reinforced composites. Further, the wear resistance of sillimanite reinforced composites was superior to rutile reinforced composites. However, coefficient of friction values of sillimanite particle reinforced composites were higher than the rutile particle reinforced composites. SEM-EDS analysis of wear track and wear debris revealed that abrasive wear and adhesion/delamination mechanisms were responsible for the wear of composites at low and high applied load conditions respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing10.1016/S1003-6326(18)64720-X ↗
2. Analysis of stir die cast Al–SiC composite brake drums based on coefficient of friction10.1016/j.triboint.2012.02.007 ↗
3. Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: a comparative study focusing on particle capture in matrix10.1177/0021998314568327 ↗
4. Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: experimental investigation and predictive modelling10.1016/j.ceramint.2015.12.181 ↗
5. A comparison of aluminium-based metal-matrix composites reinforced with coated and uncoated particulate silicon carbide10.1016/S0266-3538(99)00151-7 ↗
6. Study of the microstructure, hardness and tribological behavior of hypoeutectic Al-7Si hybrid composites10.1108/ILT-06-2015-0080 ↗
7. Wear behaviour of A356/25SiCp aluminium matrix composites sliding against automobile friction material10.1016/j.wear.2006.01.011 ↗
8. Effects of reinforcements on sliding wear behavior of aluminum matrix composites10.1016/S0043-1648(03)00066-8 ↗
9. A physically-based abrasive wear model for composite materials10.1016/S0043-1648(01)00896-1 ↗
10. Wear behavior of aluminum alloy 6061-based composites reinforced with SiC, Al2O3, and Red Mud: a comparative study10.1007/s11837-015-1365-0 ↗
11. Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy10.1016/S1003-6326(16)64089-X ↗
12. Preparation and properties of cast aluminium alloy ± sillimanite particle composite10.1016/S1359-835X(00)00187-1 ↗
13. Effect of dual particle size (DPS) on dry sliding wear behaviour of LM30/sillimanite composites10.1016/j.triboint.2017.12.031 ↗
14. Effect of particle size on dry sliding wear behaviour of sillimanite reinforced aluminium matrix composites10.1016/j.ceramint.2017.09.132 ↗
15. Effect of particle size on wear behavior of al-garnet composites10.1080/02726351.2014.954686 ↗
16. Wear behavior of dual particle size (DPS) zircon sand reinforced aluminum alloy10.1007/s11249-012-9983-y ↗
17. Effect of sillimanite particle reinforcement on dry sliding wear behaviour of aluminium alloy composite10.1179/026708303225009355 ↗
18. Effect of the interface layer on the mechanical behavior of TiO2 nanoparticle reinforced aluminum matrix composites10.1177/0021998312469238 ↗
19. Role of different range of particle size on wear characteristics of Al–rutile composites10.1080/02726351.2014.953648 ↗
20. Two-body abrasive wear behaviour of aluminium alloy—sillimanite particle reinforced composite10.1016/S0043-1648(02)00153-9 ↗
21. Effect of applied pressure on the tribological behaviour of dual particle size rutile reinforced LM13 alloy composites,10.1007/978-3-319-48191-3_95 ↗
22. Influence of particle size and temperature on the wear properties of rutile-reinforced aluminium metal matrix composite10.1177/0021998314526079 ↗
23. Microstructural evolution and wear characteristics of equal channel angular pressing processed semi-solid-cast hypoeutectic aluminum alloys10.1016/j.matdes.2014.11.054 ↗
24. Eutectic nucleation in Al–Si alloys10.1016/j.actamat.2004.05.043 ↗
25. Controlling particle/metal interactions in metal matrix composites during solidification: the role of melt viscosity and cooling rate10.1007/s11661-019-05307-9 ↗
26. Effect of elevated temperatures and applied pressure on the tribological properties of LM30/sillimanite aluminium alloy composites10.1177/0021998318805203 ↗
27. Thermal expansion of anatase and rutile between 300 and 575 K using synchrotron powder x-ray diffraction10.1154/1.2790965 ↗
28. Thermal conductivity of rock-forming minerals10.1016/0012-821X(69)90186-1 ↗
29. An investigation into the friction and wear mechanisms of aluminium high silicon alloy under contact sliding10.1016/j.wear.2016.10.026 ↗
30. Adhesive wear behaviour of cast aluminium-silicon alloys: overview10.1016/j.matdes.2009.11.038 ↗