Scratch response and tribological properties of TiAlSiN coatings deposited by reactive deep oscillation magnetron sputtering
Source abstract
Abstract
TiAlSiN nanocomposite coatings were deposited using deep oscillation magnetron sputtering with various nitrogen flow ratio ( f N2 ) of 0%–20%. The increase of f N2 promotes phase separation from a single crystallographic TiAlSi to nc -(Ti,Al)N/ a -Si 3 N 4 phase. The introduce of N content leads to the formation of refined grain size, smooth morphologies and dense microstructure. Ti 0.15 Al 0.39 Si 0.07 N 0.39 coatings with (Al + Si)/Ti ratio of 2.9 deposited at f N2 = 10% reach the highest hardness of 32.8 GPa, H/E* of and 0.0837 and H 3 /E* 2 of 0.23. The introduce of N leads to failure mode changing from brittle tensile cracking (through-thickness cracking) to buckle spallation (interfacial failure). Ti 0.15 Al 0.39 Si 0.07 N 0.39 coatings with highest H, H/E* and H 3 /E* 2 ratios show buckling failure with high L C1 of 25.4 N and L C3 of 43.6 N. Correspondingly, Ti 0.15 Al 0.39 Si 0.07 N 0.39 coatings are subjected to oxidation wear with low coefficient of friction of 0.41 and specific wear rate of 0.39 × 10 −6 mm 3 N −1 m −1 .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 10.1016/0040-6090(95)06695-010.1016/0040-6090(95)06695-0 ↗
2. 10.1111/jace.1576910.1111/jace.15769 ↗
3. 10.1016/j.tsf.2010.05.02910.1016/j.tsf.2010.05.029 ↗
4. 10.1039/C5RA09586G10.1039/C5RA09586G ↗
5. 10.1016/j.tsf.2018.10.03110.1016/j.tsf.2018.10.031 ↗
6. 10.1016/j.surfcoat.2006.07.02010.1016/j.surfcoat.2006.07.020 ↗
7. 10.1016/S0040-6090(03)01072-110.1016/S0040-6090(03)01072-1 ↗
8. Matthews A · J. Phys. D: Appl. Phys. · 2007 · 40 · 546310.1088/0022-3727/40/18/S07 ↗
9. 10.1016/j.ceramint.2019.08.16210.1016/j.ceramint.2019.08.162 ↗
10. 10.1016/j.surfcoat.2004.10.02110.1016/j.surfcoat.2004.10.021 ↗
11. 10.1016/j.tsf.2011.09.03610.1016/j.tsf.2011.09.036 ↗
12. 10.1016/j.surfcoat.2015.10.00910.1016/j.surfcoat.2015.10.009 ↗
13. 10.1016/j.surfcoat.2015.06.06410.1016/j.surfcoat.2015.06.064 ↗
14. 10.1016/j.apsusc.2015.05.11010.1016/j.apsusc.2015.05.110 ↗
15. 10.1016/S0301-679X(97)00012-110.1016/S0301-679X(97)00012-1 ↗
16. 10.1016/j.surfcoat.2019.02.00810.1016/j.surfcoat.2019.02.008 ↗
17. 10.1016/j.triboint.2005.04.01310.1016/j.triboint.2005.04.013 ↗
18. 10.1002/ppap.20060017910.1002/ppap.200600179 ↗
19. 10.1016/j.apsusc.2019.14416810.1016/j.apsusc.2019.144168 ↗
20. 10.1002/047172425410.1002/0471724254 ↗
21. 10.1016/j.tsf.2005.05.02210.1016/j.tsf.2005.05.022 ↗
22. 10.1016/j.surfcoat.2009.11.04010.1016/j.surfcoat.2009.11.040 ↗
23. 10.1063/1.497835010.1063/1.4978350 ↗
24. Lin J · J. Phys. D: Appl. Phys. · 2013 · 46 · 08400810.1088/0022-3727/46/8/084008 ↗
25. 10.1016/j.tsf.2015.09.06710.1016/j.tsf.2015.09.067 ↗
26. 10.1016/j.surfcoat.2014.12.06510.1016/j.surfcoat.2014.12.065 ↗
27. 10.1016/j.apsusc.2016.11.02510.1016/j.apsusc.2016.11.025 ↗
28. 10.1016/j.surfcoat.2015.06.04410.1016/j.surfcoat.2015.06.044 ↗
29. 10.1016/j.tsf.2015.11.04710.1016/j.tsf.2015.11.047 ↗
30. 10.1098/rspa.1909.002110.1098/rspa.1909.0021 ↗
31. 10.1002/ppap.20073140810.1002/ppap.200731408 ↗
32. 10.1016/j.surfcoat.2004.08.06010.1016/j.surfcoat.2004.08.060 ↗
33. 10.1016/j.apsusc.2010.04.02810.1016/j.apsusc.2010.04.028 ↗
34. Cheng Y · J. Phys. D: Appl. Phys. · 2009 · 42 · 12541510.1088/0022-3727/42/12/125415 ↗
35. 10.1016/S0257-8972(01)01619-X10.1016/S0257-8972(01)01619-X ↗
36. 10.1016/j.jmatprotec.2008.01.03510.1016/j.jmatprotec.2008.01.035 ↗
37. 10.1007/s10853-006-6577-910.1007/s10853-006-6577-9 ↗
38. 10.1016/S0040-6090(03)01122-210.1016/S0040-6090(03)01122-2 ↗
39. 10.1016/j.apsusc.2011.06.08610.1016/j.apsusc.2011.06.086 ↗