Design and microstructural analysis of the mixture proportion of alkali-activated fly ash-slag composite cementitious material
Source abstract
Abstract
Abstract To explore the resource utilization of fly ash, slag, and coal gangue, the composition of hydration products and strength characteristics of fly ash-slag composite cementitious material (FSGF) were studied with NaOH as an alkali activator. First, response surface analysis was used to determine factors influencing the optimal NaOH content, basalt fiber dosage, and length to obtain the complete mix ratio of the composite cementitious material. Microscopic techniques such as XRD, FTIR, TG-DSC, and SEM were employed to analyze the crystal structure, thermal properties, and micro-morphology of the composite cementitious material, and to investigate the mechanism of NaOH-activated fly ash-slag cementitious material. The results indicated that the sensitivity of each factor affecting the mechanical properties of the composite cementitious material followed this sequence: NaOH content > basalt fiber length > basalt fiber dosage, with varying degrees of interaction among them. When the mass ratio of fly ash, slag, and coal gangue was 5:1:4, with 3% NaOH by weight, 2% basalt fiber dosage, and a fiber length of 3 mm, the optimal mix was achieved. The composite material achieved a compressive strength of 8.97 MPa after 28 days of standard curing at room temperature. NaOH, as an alkali activator, provided the strong alkaline environment required for the initial hydration of fly ash-slag composite cementitious materials, promoting the hydration of slag and fly ash. The hydration products in the fly ash-slag composite system were unevenly distributed, primarily consisting of gels like C-S-H, C-A-H, and C-A-S-H. NaOH was highly effective as an alkali activator in the fly ash-slag system.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
2. Research on coal safety range and green low-carbon technologypath under the dual-carbon background
3. Disaster mechanism and prevention methods of large -scale high tailings dam
4. Fly ash and slag10.1016/j.cemconres.2019.105826 ↗
5. Examination of water absorption of low volume fly ash concrete (LVFAC) under water immersion conditions10.1088/2053-1591/acedef ↗
6. Test study on solidification of copper contaminated soil by alkali activated cementitious materials
7. A contribution to understanding the hardening process of cemented pastefill10.1016/j.mineng.2003.10.022 ↗
8. Study on compressive and flexural properties of red mud/fly ash filling material for coal mine10.13779/j.cnki.issn1001-0076.2023.07.001 ↗
9. Preparation and performance of slag-based binders for the cementation of fine tailings10.1080/01694243.2017.1394034 ↗
10. Effect of tailings fineness on flow, strength, ultrasonic and microstructure characteristics of cemented paste backfill10.1016/j.conbuildmat.2020.120645 ↗
11. Research status of geopolymer concrete
12. Effect of calcia content on structure and properties of metakaolin/blast furnace slag-based geopolymers
13. Microstructure and properties of alkali-activated blast furnace slag based geopolymer
14. Mechanical properties and microscopic characteristics of fly ash–slag composite backfill10.1007/s40948-023-00664-7 ↗
15. Combination of slag and fly ash to prepare engineered cementitious composite: a study on mechanical properties and gas permeability10.1061/(ASCE)MT.1943-5533.0004728 ↗
16. Study of the mechanical properties and microstructure of alkali-activated fly ash–slag composite cementitious materials10.3390/polym15081903 ↗
17. Enhancement fracture behavior of sustainable cementitious composites using synergy between fly ash (FA) and nanosilica (NS) in the assessment based on digital image processing procedure10.1016/j.tafmec.2024.104442 ↗
18. Research on improving the flexural performance of alkali-activated geopolymer cemented coal gangue through layered addition of fibers10.1016/j.jobe.2024.110549 ↗
19. OSAMA A. M. Effect of immersing geopolymer slag-fly ash mortar in sulfuric acid on strength development and stability of mass10.1016/j.conbuildmat.2022.127786 ↗
20. Self-healing recovery and micro-structural properties of slag/fly-ash based engineered cementitious composites under chloride environment and tidal exposure10.1016/j.cemconcomp.2022.104789 ↗
21. A coupled nanoindentation/SEM-EDS study on low water/cement ratio Portland cement paste: evidence for C-S-H/Ca(OH)2 nanocomposites10.1111/j.1551-2916.2009.03599.x ↗
22. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
23. A review: the comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements10.1016/j.cemconres.2010.03.020 ↗
24. A review: reaction mechanism and strength of slag and fly ash-based alkali-activated materials10.1016/j.conbuildmat.2022.126843 ↗
25. Geopolymers as an alternative to Portland cement: an overview10.1016/j.conbuildmat.2019.117455 ↗