Industrial manufacturing and characterization of multiscale CFRP laminates made from prepregs containing graphene-related materials
Source abstract
Abstract
Abstract The introduction of graphene-related materials (GRMs) in carbon fibre-reinforced polymers (CFRP) has been proved to enhance their mechanical and electrical properties. However, methodologies to produce the 3-phase materials (multiscale composites) at an industrial scale and in an efficient manner are still lacking. In this paper, multiscale CFRP composites containing different GRMs have been manufactured following standard procedures currently used in the aerospace industry with the aim to evaluate its potential application. Graphite nanoplateletelets (GNPs), in situ exfoliated graphene oxide (GO) and reduced graphene oxide (rGO) have been dispersed into an epoxy resin to subsequently impregnate aeronautical grade carbon fibre tape. The resulting prepregs have been used for manufacturing laminates by hand lay-up and autoclave curing at 180 °C. A broad characterization campaign has been carried out to understand the behaviour of the different multiscale laminates manufactured. The degree of cure, glass transition temperature and degradation temperature have been evaluated by thermal evolution techniques. Similarly, their mechanical properties (tensile, flexural, in-plane shear, interlaminar shear and mode I interlaminar fracture toughness) have been analysed together with their electrical conductivity. The manufacturing process resulted appropriated for producing three-phase laminates and their quality was as good as in conventional CFRPs. The addition of GO and rGO resulted in an enhancement of the in-plane shear properties and delamination resistance while the addition of GNP improved the electrical conductivity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Graphene research and applications · Fiber-reinforced polymer composites · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Bacon · 1986
2. Hyer · 2009
3. On the fracture toughness of advanced materials10.1002/adma.200803322 ↗
4. Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles—a review10.1016/j.compscitech.2013.06.021 ↗
5. Tong · 2002
6. A critical review of nanotechnologies for composite aerospace structures10.1007/s12567-016-0123-7 ↗
7. Simultaneously increasing the electrical conductivity and fracture toughness of carbon-fiber composites by using silver nanowires-loaded interleaves10.1016/j.compscitech.2014.03.020 ↗
8. Preparation of highly electrically carbon-fiber composites with high interlaminar fracture toughness by using silver-plated interleaves10.1016/j.compscitech.2019.03.014 ↗
9. Interlaminar toughness of interleaved CFRP using non-woven veils: I. Mode-I testing10.1016/j.compositesa.2011.07.016 ↗
10. Interlaminar fracture toughness of aerospace-grade carbon fibre reinforced plastics interleaved with thermoplastic veils10.1016/j.compositesa.2019.105642 ↗
11. Carbon nanotubes-doped veils10.1016/j.compstruct.2015.07.115 ↗
12. Epoxy-based fibre reinforced nanocomposites10.1002/adem.200700118 ↗
13. Epoxy nanocomposites—fracture and toughening mechanisms10.1016/j.engfracmech.2006.05.018 ↗
14. Multiscale polymer composites: a review of the interlaminar fracture toughness improvement10.3390/fib5040038 ↗
15. Graphene and related materials in hierarchical fiber composites: production techniques and key industrial benefits10.1016/j.compscitech.2019.107848 ↗
16. The rise of graphene10.1038/nmat1849 ↗
17. Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites10.1039/C9NR06952F ↗
18. Review on polymer/graphite nanoplatelet nanocomposites10.1007/s10853-011-5572-y ↗
19. The mechanics of graphene nanocomposites: a review10.1016/j.compscitech.2012.05.005 ↗
20. Dispersion behaviour of graphene oxide and reduced graphene oxide10.1016/j.jcis.2014.05.033 ↗
21. The role of functional groups on graphene oxide in epoxy nanocomposites10.1016/j.polymer.2013.08.026 ↗
22. Effect of functionalization of graphene nanoplatelets on the mechanical response of graphene/epoxy composites10.1016/j.matdes.2014.10.047 ↗
23. Fracture toughness and failure mechanism of graphene based epoxy composites10.1016/j.compscitech.2014.03.014 ↗
24. Synthesis of graphene and its applications: a review10.1080/10408430903505036 ↗
25. Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids10.1038/nmat3944 ↗
26. Comparison of filler percolation and mechanical properties in graphene and carbon nanotubes filled epoxy nanocomposites10.1016/j.eurpolymj.2013.02.033 ↗
27. Thermal properties of doubly reinforced fiberglass/epoxy composites with graphene nanoplatelets, graphene oxide and reduced-graphene oxide10.1016/j.compositesb.2018.11.051 ↗
28. Epoxy composites with carbon nanotubes and graphene nanoplatelets—dispersion and synergy effects10.1016/j.carbon.2014.07.003 ↗
29. RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites10.1016/j.compositesa.2011.12.019 ↗
30. Filtration effects of graphene nanoplatelets in resin infusion processes: Problems and possible solutions10.1016/j.compscitech.2016.12.020 ↗
31. Effect of filtration in functionalized and non-functionalized CNTs and surface modification of fibers as an effective alternative approach10.1016/j.compositesb.2016.02.063 ↗
32. Effect of graphene oxide concentration on the flexural properties of CFRP at low temperature10.1016/j.carbon.2019.06.032 ↗
33. Prospects and challenges of nanomaterial engineered prepregs for improving interlaminar properties of laminated composites––a review10.1557/mrc.2017.13 ↗
34. Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes10.1016/j.compositesa.2011.06.005 ↗
35. Experimental torsional shear properties of carbon fiber reinforced epoxy composites containing carbon nanotubes10.1016/j.compstruct.2013.04.033 ↗
36. Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion10.1177/0021998311410472 ↗
37. Mechanical properties of CFRP laminates manufactured from unidirectional prepregs using CSCNT-dispersed epoxy10.1016/j.compositesa.2007.07.002 ↗
38. Synergetic effects of mechanical properties on graphene nanoplatelet and multiwalled carbon nanotube hybrids reinforced epoxy/carbon fiber composites10.1155/2015/412071 ↗
39. Improvement of compressive strength after impact in fibre reinforced polymer composites by matrix modification with thermally reduced graphene oxide10.1016/j.compscitech.2013.07.019 ↗
40. Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems10.1039/C4NR01600A ↗
41. EU Graphene Flagship project aims for technological breakthroughs: graphene-flagship.eu10.1557/mrs.2014.107 ↗
42. 3-Phase hierarchical graphene-based epoxy nanocomposite laminates for automotive applications10.1016/j.jmst.2019.05.033 ↗
43. Testing the influence of the temperature, RH and filler type and content on the universal power law for new reduced graphene oxide TPU composites10.1088/2053-1591/aa8e11 ↗
44. Graphene-based ultracapacitors10.1021/nl802558y ↗
45. Functionalization of graphene: covalent and non-covalent approaches, derivatives and applications10.1021/cr3000412 ↗
46. Recent advances in graphene based polymer composites10.1016/j.progpolymsci.2010.07.005 ↗
47. Size effect of graphene nanoplatelets on the morphology and mechanical behavior of glass fiber/epoxy composites10.1007/s10853-015-9649-x ↗
48. Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers10.1155/2010/453420 ↗
49. The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites10.1016/j.compscitech.2007.04.025 ↗
50. Use of graphene oxide in achieving high overall thermal properties of polymer for printed electronics10.1039/C5RA24669E ↗
51. In situ processing of epoxy composites reinforced with graphene nanoplatelets10.1016/j.compscitech.2013.06.020 ↗
52. Preparation and thermal properties of graphene oxide/main chain benzoxazine polymer10.1016/j.eurpolymj.2013.09.005 ↗
53. Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites10.1016/j.polymertesting.2015.09.010 ↗
54. Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites10.1016/j.compositesa.2005.02.007 ↗
55. Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase10.1016/j.compositesb.2014.10.014 ↗
56. Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets10.1016/j.compositesa.2014.12.010 ↗
57. The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: experimental characterization and multiscale modelling10.1016/j.compositesb.2017.11.043 ↗
58. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide10.1021/am201757v ↗
59. Characterizing the interfacial shear strength of graphite/epoxy composites containing functionalized graphene10.1016/j.compositesb.2016.05.001 ↗
60. Interfacial characterization of functionalized graphene-epoxy composites10.1177/0021998319866252 ↗
61. Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement10.1016/j.scriptamat.2006.12.038 ↗
62. Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites10.1016/j.carbon.2009.06.039 ↗
63. Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites10.1016/j.compositesa.2015.05.012 ↗
64. A double cantilever beam test for characterizing mode I delamination of composite materials10.1177/073168448200100402 ↗
65. Review of the microscopic and macroscopic aspects of fracture of unmodified and modified epoxy resins10.1016/0921-5093(90)90167-2 ↗
66. Fundamental aspects of nano-reinforced composites10.1016/j.compscitech.2005.01.014 ↗
67. Electrical conductivity modeling and validation in unidirectional carbon fiber reinforced polymer composites
68. A theoretical treatment of graphene nanocomposites with percolation threshold, tunneling-assisted conductivity and microcapacitor effect in AC and DC electrical settings10.1016/j.carbon.2015.09.103 ↗