Simultaneous measurement of refractive index and temperature of seawater based on surface plasmon resonance in a dual D-type photonic crystal fiber
Source abstract
Abstract
Abstract A dual D-type photonic crystal fiber (PCF) was proposed in this work to measure the refractive index and temperature of seawater. Two golden layers were designed to be coated on the two polished planes in the dual D-type PCF. Two confinement loss peaks in the transmission spectrum appeared due to the surface plasmon resonances which were inspired on the two golden layers. In order to achieve two-parameter sensing, one of the two polished planes was further coated with a polydimethylsiloxane (PDMS) layer which was temperature-sensitive. Seawater was assumed to be coated on the outer surface of the PCF. Numerical results by using the finite element method showed that the measurement sensitivity of the refractive index of seawater reached 1371 and 1228 nm/RIU, while the measurement sensitivity of temperature reached −0.3 and −1.06 nm/ °C, respectively. Finally, we obtained the transfer matrix expression which could be used to measure the refractive index and temperature of seawater simultaneously. The designed dual D-type PCF, which is simple in structure, highly sensitive and two-parameter measuring, could be a promising candidate for the monitoring of seawater.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Photonic Crystal and Fiber Optics · Advanced Fiber Optic Sensors · Plasmonic and Surface Plasmon Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Photonic crystal fibers10.1126/science.1079280 ↗
2. Simultaneous measurement of refractive index and temperature using a SPR-based fiber optic sensor10.1016/j.snb.2016.09.164 ↗
3. High-sensitivity plasmonic temperature sensor based on photonic crystal fiber coated with nanoscale gold film10.7567/APEX.8.046701 ↗
4. Surface plasmon induced polarization splitting based on dual-core photonic crystal fiber with metal wire10.1007/s11468-013-9542-x ↗
5. Highly sensitive temperature sensor based on Sagnac interferometer with liquid crystal photonic crystal fibers10.1016/j.ijleo.2018.11.006 ↗
6. Surface plasmon induced polarization filter based on Au wires and liquid crystal infiltrated photonic crystal fibers10.1007/s11468-015-0070-8 ↗
7. Refractive index sensing and filtering characteristics of side-polished and gold-coated photonic crystal fiber with a offset core10.1016/j.optlastec.2020.106759 ↗
8. Simultaneous measurement of temperature and relative humidity based on a microfiber sagnac loop and MoS210.1109/JLT.2019.2947644 ↗
9. Temperature sensor based on modes coupling effect in a liquid crystal-filled microstructured optical fiber10.1016/j.ijleo.2020.165044 ↗
10. Hollow-core silver coated photonic crystal fiber plasmonic sensor10.1016/j.optmat.2017.12.049 ↗
11. Surface plasmon resonance sensors for detection of chemical and biological species10.1021/cr068107d ↗
12. Sensitivity-enhanced optical fiber biosensor based on coupling effect beyween SPR and LSPR10.1109/JSEN.2018.2866169 ↗
13. The effect of seasonal anomalies of seawater temperature and salinity on the fluctuation in yields of small yellow croaker, Pseudosciaena polyactis, in the Yellow Sea, Fish10.1046/j.1365-2419.1997.00025.x ↗
14. Relationship between the refractive index of seawater and salinity, temperature
15. Simultaneous measurement of salinity, temperature and pressure in seawater using optical fiber SPR sensor10.1016/j.measurement.2019.07.020 ↗
16. Simultaneous measurement of temperature and refractive index based on a hybrid surface plasmon resonance multimode interference fiber sensor10.1364/AO.382787 ↗
17. Theoretical analysis of high-sensitive seawater temperature and salinity measurement based on C-type micro-structured fiber10.1016/j.snb.2017.11.179 ↗
18. Simultaneous measurement of refractive index and temperature based on SPR in D-shaped MOF10.1364/AO.56.004369 ↗
19. Novel optical fiber SPR temperature sensor based on MMF-PCF-MMF structure and gold-PDMS film10.1364/OE.26.001910 ↗
20. FEM based Highly Sensitive Dual Core Temperature Sensor: Design and Analysis,10.1364/OSAC.2.002581 ↗
21. Experimental realization of D-shaped photonic crystal fiber SPR sensor10.1088/1361-6463/50/2/025101 ↗
22. Process and material properties of polydimethylsiloxane (PDMS) for optical MEMS10.1016/j.sna.2009.01.026 ↗
23. Surface-plasmon-resonance-based optical-fiber micro-displacement sensor with temperature compensation10.3390/s18103210 ↗
24. Analysis of high sensitivity photonic crystal fiber sensor based on surface plasmon resonance of refractive indexes of liquids10.3390/s18092922 ↗
25. High-sensitivity plasmonic temperature sensor based on gold-coated D-shaped photonic crystal fiber10.1364/AO.58.005115 ↗
26. The biochemical sensor based on liquid-core photonic crystal fiber filled with gold, silver and aluminum10.1016/j.optlastec.2020.106363 ↗
27. Double-side polished fiber SPR sensor for simultaneous temperature and refractive index measurement10.1109/LPT.2016.2575926 ↗
28. Liquid core fiber interferometer for simultaneous measurement of refractive index and temperature10.1109/LPT.2018.2889753 ↗
29. Highly sensitive refractive index sensor for temperature and salinity measurement of seawater10.1016/j.ijleo.2020.164901 ↗